Access Accept vs Tunneled reply

[David Peterson]

I am trying to work out where I would be putting attributes for Access
Accept.

 

I am sending the following in a reply:

 

(822) [ttls] Got tunneled reply code 2

        WiMAX-Classifer-Direction = Bi-Directional

        WiMAX-Classifer-Priority = 1

        WiMAX-ClassifierID = 1

        WiMAX-Downlink-QOS-Id = 1

        WiMAX-Uplink-QOS-Id = 1

        WiMAX-Transport-Type = Ethernet

        WiMAX-Direction = Bi-Directional

        WiMAX-Packet-Data-Flow-Id = 1

        WiMAX-QoS-Id = 1

        WiMAX-Schedule-Type = Best-Effort

        WiMAX-Maximum-Sustained-Traffic-Rate = 31457289

        WiMAX-VLAN-ID = 192

        R3-IF-Name = "vpws"

        PDFID = 1

        MS-CHAP2-Success =
0xc0533d31434143314146453345463545453936444336303741423437383932303738433539
443531373533

        MS-MPPE-Recv-Key = 0x7d918cc693141550f2c5b39922ad18da

        MS-MPPE-Send-Key = 0xe3fb5674a52feb22dee4a8c636909169

        MS-MPPE-Encryption-Policy = Encryption-Allowed

        MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed

 

However, the NAS vendor states that the reply attributes should be sent
during this portion of the radius handshake:

 

Sending Access-Accept of id 72 to 172.16.4.2 port 1812

        MS-MPPE-Recv-Key =
0x8616d5a2fbb28b308b5ddf419333f8a2a07b79bfbdd679b4161262be7480eb54

        MS-MPPE-Send-Key =
0x7f856a84bf226204dc2c4c3f5a25c9d808cb584c1b927dafb1a09ab7a360cfc8

        EAP-Message = 0x03080004

        Message-Authenticator = 0x00000000000000000000000000000000

        User-Name = "{sm=1}D8F69CCE1EF580B70933A526924A2D0C"

 

 

Currently I have the attributes listed as a group reply.  How do I send the
attributes needed during the access accept packet?


David

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110309/271c6e5f/attachment.html>