EAP-TTLS Problem
Milosh Droxy
droxy.net at gmail.com
Tue Mar 29 13:40:41 CEST 2011
Hi
ok, I've been searching and testing for about a week now. I'm quite sure
I've read almost every topic related to my problem on this mailing-list and
others. and I was afraid to ask for help because I've never posted on a
mailing list or a forum and I was really afraid of Alan DeKoK.
The Problem:
I'm trying to use Freeradius to authenticate users using EAP-TTLS MSCHAP,
with no success.
I use "FreeRADIUS Version 2.1.10, for host x86_64-unknown-linux-gnu". on a
Ubuntu 10.04 64bit Server.
I've used these devices as clients
two Ubiquiti devices (http://www.ubnt.com/nanobridge) (one as AP and one as
client)
A TP-Link TL-WR542G as AP and my laptop (running ubuntu 10.10) as client.
(and an iPad)
(There were NO Windows XP in any of my tests, so it's not a Microsoft issue)
and I've used eapol_test, with successful results, the problem only shows
when I try to authenticate remotely. since the eapol_test results were fine
I wont post the output here. (or should I ?)
and here is the output for when I try to authenticate remotely (the output
is exactly the same with any combination I've tried)
FreeRADIUS Version 2.1.10, for host x86_64-unknown-linux-gnu, built on Mar
5 2011 at 07:22:25
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file
/usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/sql.conf
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file
/usr/local/etc/raddb/sites-enabled/control-socket
main {
allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file
/usr/local/etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file
/usr/local/etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/usr/local/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/usr/local/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file
/usr/local/etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file
/usr/local/etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file
/usr/local/etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = no
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file
/usr/local/etc/raddb/modules/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/usr/local/etc/raddb/mycerts"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/mycerts/server_keycert.pem"
certificate_file = "/usr/local/etc/raddb/mycerts/server_keycert.pem"
private_key_password = "usetheserver"
dh_file = "/usr/local/etc/raddb/mycerts/dh"
random_file = "/usr/local/etc/raddb/mycerts/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/usr/local/etc/raddb/mycerts/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = yes
include_length = yes
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file
/usr/local/etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file
/usr/local/etc/raddb/modules/files
files {
usersfile = "/usr/local/etc/raddb/users"
acctusersfile = "/usr/local/etc/raddb/acct_users"
preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/usr/local/etc/raddb/modules/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server { # from file /usr/local/etc/raddb/radiusd.conf
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file
/usr/local/etc/raddb/modules/digest
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/usr/local/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/usr/local/etc/raddb/huntgroups"
hints = "/usr/local/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /usr/local/etc/raddb/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "127.0.0.1"
port = ""
login = "radius"
password = "*************"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
readclients = yes
deletestalesessions = yes
num_sql_socks = 5
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM
nas"
authorize_check_query = "SELECT id, username, attribute, value,
op FROM radcheck WHERE username =
'%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value,
op FROM radreply WHERE username =
'%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname,
attribute, Value, op FROM radgroupcheck WHERE
groupname = '%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname,
attribute, value, op FROM radgroupreply WHERE
groupname = '%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct
SET acctstoptime = '%S', acctsessiontime
= unix_timestamp('%S') -
unix_timestamp(acctstarttime), acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
%{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND
nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <=
'%S'"
accounting_update_query = " UPDATE radacct
SET framedipaddress = '%{Framed-IP-Address}',
acctsessiontime = '%{Acct-Session-Time}',
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32
|
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO
radacct (acctsessionid, acctuniqueid,
username, realm, nasipaddress,
nasportid, nasporttype, acctstarttime,
acctsessiontime, acctauthentic, connectinfo_start,
acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, servicetype, framedprotocol,
framedipaddress, acctstartdelay,
xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND),
'%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}'
<< 32 | '%{%{Acct-Output-Octets}:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid,
nasporttype, acctstarttime, acctstoptime,
acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, acctterminatecause,
servicetype, framedprotocol, framedipaddress,
acctstartdelay, acctstopdelay, xascendsessionsvrkey)
VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0',
'%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET
acctstarttime = '%S', acctstartdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_start =
'%{Connect-Info}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
'%{Acct-Session-Time}', acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
'%{Connect-Info}' WHERE acctsessionid =
'%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm, nasipaddress,
nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay)
VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL
(%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0})
SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}',
'', '%{Connect-Info}',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}'
<< 32 | '%{%{Acct-Output-Octets}:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM
radusergroup WHERE username = '%{SQL-User-Name}' ORDER
BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid,
framedipaddress, callingstationid,
framedprotocol FROM
radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES
( '%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at 127.0.0.1:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Read entry nasname=10.10.10.145,shortname=ubnt,secret=testing
rlm_sql (sql): Adding client 10.10.10.145 (ubnt, server=<none>) to clients
list
rlm_sql (sql): Read entry nasname=10.10.10.89,shortname=AP,secret=testing
rlm_sql (sql): Adding client 10.10.10.89 (AP, server=<none>) to clients list
rlm_sql (sql): Released sql socket id: 4
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/usr/local/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file
/usr/local/etc/raddb/modules/detail
detail {
detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/usr/local/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.10.10.89 port 1060, id=0,
length=167
Message-Authenticator = 0x811ce545876890cc89ddd343bcc3cca9
Service-Type = Framed-User
User-Name = "test"
Framed-MTU = 1488
Called-Station-Id = "D8-5D-4C-C2-A6-08:TEST"
Calling-Station-Id = "10-93-E9-1D-10-1B"
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 54Mbps 802.11g"
EAP-Message = 0x020000090174657374
NAS-IP-Address = 192.168.1.5
NAS-Port = 1
NAS-Port-Id = "STA port # 1"
# Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[sql] expand: %{User-Name} -> test
[sql] sql_set_user escaped user --> 'test'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
-> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = 'test' ORDER BY id
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
-> SELECT id, username, attribute, value, op FROM
radreply WHERE username = 'test' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
groupname FROM radusergroup WHERE username =
'test' ORDER BY priority
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.10.10.89 port 1060
EAP-Message = 0x010100061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x829fae86829ebb1a8141bab516e87a11
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.10.10.89 port 1060, id=0,
length=167
Sending duplicate reply to client AP port 1060 - ID: 0
Sending Access-Challenge of id 0 to 10.10.10.89 port 1060
Waking up in 1.8 seconds.
Cleaning up request 0 ID 0 with timestamp +11
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x829fae86829ebb1a did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
thank you very much
P.S: please forgive my ignorance of the proper way of mailing or explaining
my problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110329/d5c38776/attachment.html>
More information about the Freeradius-Users
mailing list