No authenticate method (Auth-Type) found for the request

[Harish Mandowara]

I am using network manager with radius server. I put this config in this
files

eap.conf
default_eap_type = peap

create new certificate as per http://deployingradius.com
and network manager side i put ca.der

but its giving

Ready to process requests.
rad_recv: Access-Request packet from host 192.168.21.32 port 32773, id=1,
length=127
	User-Name = "testing"
	NAS-IP-Address = 192.168.21.32
	Called-Station-Id = "00ffff000001"
	Calling-Station-Id = "1caff76ce38c"
	NAS-Identifier = "00ffff000001"
	NAS-Port = 3
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0200000c0174657374696e67
	Message-Authenticator = 0xbc498e29bfb9f44c5276dcb7d57b082e
  WARNING: Empty authorize section.  Using default return values.
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting
the user
Failed to authenticate the user.
Delaying reject of request 5 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 5
Sending Access-Reject of id 1 to 192.168.21.32 port 32773
Waking up in 4.9 seconds.
Cleaning up request 5 ID 1 with timestamp +95
Ready to process requests.


thanks in advance




-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.