radutmp file not created

[Khapare Joshi]

okay,

I have following file in my /var/log/radius/radacct/192.168.1.1 directory
reply-detail-20140430
auth-detail-20140430

in reply-detail-20140430 Packet-Type says Accept-Accept
Wed Apr 30 14:08:40 2014
        Packet-Type = Access-Accept
        MS-MPPE-Encryption-Policy = 0x00000002
        MS-MPPE-Encryption-Types = 0x00000004
        MS-MPPE-Send-Key = 0x263ee9279fd3d514c1d61592037f0f3b
        MS-MPPE-Recv-Key = 0x3e0f78cd3468dd822693b9864bf6a60d
        EAP-Message = 0x03090004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "testuser"

and in auth-detail-20140430 Packet-Type=Accept-Request

Wed Apr 30 14:08:40 2014
        Packet-Type = Access-Request
        EAP-Message = 0x020900061a03
        FreeRADIUS-Proxied-To = 127.0.0.1
        User-Name = "testuser at ba.com"
        State = 0x15308db9143997fbbf8015e30f10d43e
        Calling-Station-Id = "206432616d2d"
        Called-Station-Id = "dca5f44de9c0:eduroam-temp"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=82d0a5f700000ecd536103d3"
        NAS-IP-Address = 192.168.1.1
        NAS-Identifier = "mywireless1"
        Airespace-Wlan-Id = 310
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11

if Packet-Type=Accept-Request is not accounting packets then Packet-Type =
Access-Accept must the one or not ? if Packet-Type = Access-Accept then why
it is not creating those file so that I can use the Simultaneous-Use := 2
for users.

K




On Wed, Apr 30, 2014 at 12:23 PM, Alan DeKok <aland at deployingradius.com>wrote:

> Khapare Joshi wrote:
> > I am not able to do radwho since radutmp is not created, In Radius -X it
> > tells me radutmp module is loaded and file should be
> /var/log/radius/radutmp
>
>   The file is only created when the server receives accounting packets.
>
> > And, In /var/log/radius/radacct/192.168.1.1/auth-detail-20140430
> > <http://192.168.1.1/auth-detail-20140430>, NAS seem to sending request
> > packet to the server
> >
> > Wed Apr 30 10:58:41 2014
> >         Packet-Type = Access-Request
>
>   That's not an accounting packet.
>
> > In /etc/raddb/sites-enabled/default accounting section radutmp is
> > uncommented
>
>   That section is run only when the server receives accounting packets.
>
> > And, still radutmp file is not created in /var/log/radius directory.
>
>   Because the server isn't receiving accounting packets.
>
> > When I run the freeradius in debug mode (radiusd -X) and test
> > authenticate user I get following:
> >
> > Listening on proxy address * port 1814
> > Ready to process requests.
> > rad_recv: Access-Request packet from host 127.0.0.1 port 54636, id=127,
>
>   That's not an accounting packet.
>
>   Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140430/83f8f2a1/attachment.html>