Help Accounting packet forwarding

[battossai]

hi,


this debug log below, is it means that is working ?

*Proxying request 1 to home server 103.247.122.210 port 1813*

*Sending Accounting-Request of id 105 to 103.247.122.210 port 1813*

* Service-Type = Framed-User*

* Framed-Protocol = PPP*

* NAS-Port = 417051*

* NAS-Port-Type = Ethernet*

* User-Name = "ultimate_dhanz"*

* Calling-Station-Id = "D4:CA:6D:9E:46:AF"*

* Called-Station-Id = "PPPoE.Service.Vlan25"*

* NAS-Port-Id = "vlan25"*

* MS-CHAP-Domain = "yahoo.com <http://yahoo.com>"*

* Acct-Session-Id = "81b0003f"*

* Framed-IP-Address = 103.247.123.4*

* Acct-Authentic = RADIUS*

* Event-Timestamp = "Jan 24 2014 21:19:54 WIT"*

* Acct-Session-Time = 248700*

* Acct-Input-Octets = 237148671*

* Acct-Input-Gigawords = 0*

* Acct-Input-Packets = 1639185*

* Acct-Output-Octets = 1538150698*

* Acct-Output-Gigawords = 0*

* Acct-Output-Packets = 1880782*

* Acct-Status-Type = Interim-Update*

* NAS-Identifier = "DR2.SMG"*

* Acct-Delay-Time = 0*

* Mikrotik-Realm = "yahoo.com <http://yahoo.com>"*

* NAS-IP-Address = 103.247.123.158*

* Proxy-State = 0x3438*

*Going to the next request*

*Waking up in 0.3 seconds.*

*rad_recv: Accounting-Response packet from host 103.247.122.210 port 1813,
id=105, length=24*

* Proxy-State = 0x3438*

*+- entering group post-proxy {...}*

*[eap] No pre-existing handler found*

*++[eap] returns noop*

*Sending Accounting-Response of id 48 to 103.247.123.158 port 60060*

*Finished request 1.*

*Cleaning up request 1 ID 48 with timestamp +52*

*Going to the next request*


thanks.







On Fri, Jan 24, 2014 at 8:58 PM, Alan DeKok <aland at deployingradius.com>wrote:

> battossai wrote:
> > So i don't edit proxy.conf right ?
>
>   For proxying, you usually edit proxy.conf.
>
> > Can you a short meaning of a realm ?
>
>   Read proxy.conf.  This is documented.
>
>   Alan DeKok.
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20140124/4bb3de5c/attachment.html>