using ippol

Randeep randeep123 at gmail.com
Fri Jun 19 08:39:07 CEST 2015


Hi all,

I'm trying to configure freeradius to send the ip for the user.

In the radiusd.conf i have uncommented  $INCLUDE sqlippool.conf

in the sqlippool.conf,

I have enabled mysql ippool.conf

in the file /etc/raddb/modules/ippool,

I have defined ippool main_pool.
And specified the range, netmask etc in the block.

Key I have specified as
key = "%{NAS-IP-Address} %{NAS-Port}"

But my radippool table is empty. Do I have to specify anything there?


I'm testing with radtest. I hope this can be tested with it.

In the respose i'm getting like this

[root at localhost ~]# radtest randeep  randeep123 192.168.1.182 0  lukup124
Sent Access-Request Id 110 from 0.0.0.0:49548 to 192.168.1.182:1812 length
77
        User-Name = 'randeep'
        User-Password = 'randeep123'
        NAS-IP-Address = 127.0.0.1
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = 'randeep123'
Received Access-Accept Id 110 from 192.168.1.182:1812 to 0.0.0.0:0 length 56
        Framed-Protocol = PPP
        Framed-IP-Netmask = 255.255.255.0
        Framed-MTU = 1500
        Framed-Routing = Broadcast-Listen
        Framed-Compression = Van-Jacobson-TCP-IP
        Service-Type = Framed-User
[root at localhost ~]#

Do I have to give sqlippool or mainpool in
authenticate/authorize/account/preauth in sites-enabled/default?

Please advice.

Regards,
Randeep


More information about the Freeradius-Users mailing list