Error setting up Freeradius

Roger Kidd roger.kidd at gmail.com
Sat Nov 21 16:11:58 CET 2015


I'm trying to get free radius to work with my ASUS RT-AC68U router. I get
the below in my debug output.

Any help would be much appreciated.


FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Oct 15
2015 at 11:03:19
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/rediswho
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/sql.conf
including configuration file /etc/freeradius/sql/mysql/dialup.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
 }
 security {
max_attributes = 200
reject_delay = 1
status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
 }
 home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
  coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = yes
secret = "Shanna12"
nastype = "other"
 }
 client 192.168.1.1/24 {
require_message_authenticator = no
secret = "Shanna12"
shortname = "private-network-1"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
  exec {
wait = no
input_pairs = "request"
shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file
/etc/freeradius/modules/expiration
  expiration {
reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file
/etc/freeradius/modules/logintime
  logintime {
reply-message = "You are calling outside your allowed timespan  "
minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
 modules {
  Module: Creating Auth-Type = digest
  Module: Creating Post-Auth-Type = REJECT
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
  pap {
encryption_scheme = "auto"
auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file
/etc/freeradius/modules/mschap
  mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
  }
 Module: Linked to module rlm_digest
 Module: Instantiating module "digest" from file
/etc/freeradius/modules/digest
 Module: Linked to module rlm_unix
 Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
  unix {
radwtmp = "/var/log/freeradius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
  eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
challenge = "Password: "
auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
ecdh_curve = "prime256v1"
    cache {
enable = no
lifetime = 24
max_entries = 255
    }
    verify {
    }
    ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
with_ntdomain_hack = no
send_error = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file
/etc/freeradius/modules/preprocess
  preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_realm
 Module: Instantiating module "suffix" from file
/etc/freeradius/modules/realm
  realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file
/etc/freeradius/modules/files
  files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
  }
 Module: Linked to module rlm_sql
 Module: Instantiating module "sql" from file /etc/freeradius/sql.conf
  sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = ""
login = "radius"
password = "pa55word"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/freeradius/sqltrace.sql"
readclients = yes
deletestalesessions = yes
num_sql_socks = 5
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op
  FROM radcheck           WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op
  FROM radreply           WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op           FROM radgroupcheck           WHERE groupname =
'%{Sql-Group}'           ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op           FROM radgroupreply           WHERE groupname =
'%{Sql-Group}'           ORDER BY id"
accounting_onoff_query = "          UPDATE radacct           SET
   acctstoptime       =  '%S',              acctsessiontime    =
 unix_timestamp('%S') -
 unix_timestamp(acctstarttime),              acctterminatecause =
 '%{Acct-Terminate-Cause}',              acctstopdelay      =
 %{%{Acct-Delay-Time}:-0}           WHERE acctstoptime IS NULL
AND nasipaddress      =  '%{NAS-IP-Address}'           AND acctstarttime
  <= '%S'"
accounting_update_query = "           UPDATE radacct           SET
     framedipaddress = '%{Framed-IP-Address}',              acctsessiontime
    = '%{Acct-Session-Time}',              acctinputoctets     =
'%{%{Acct-Input-Gigawords}:-0}'  << 32 |
 '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets    =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
 '%{%{Acct-Output-Octets}:-0}'           WHERE acctsessionid =
'%{Acct-Session-Id}'           AND username        = '%{SQL-User-Name}'
      AND nasipaddress    = '%{NAS-IP-Address}'"
accounting_update_query_alt = "           INSERT INTO radacct
(acctsessionid,    acctuniqueid,      username,              realm,
   nasipaddress,      nasportid,              nasporttype,
 acctstarttime,     acctsessiontime,              acctauthentic,
 connectinfo_start, acctinputoctets,              acctoutputoctets,
calledstationid,   callingstationid,              servicetype,
 framedprotocol,    framedipaddress,              acctstartdelay,
xascendsessionsvrkey)           VALUES             ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',
 '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
 '%{NAS-Port-Type}',              DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND),
'%{Acct-Session-Time}',              '%{Acct-Authentic}', '',
 '%{%{Acct-Input-Gigawords}:-0}' << 32 |
 '%{%{Acct-Input-Octets}:-0}',
 '%{%{Acct-Output-Gigawords}:-0}' << 32 |
 '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}',
'%{Calling-Station-Id}',              '%{Service-Type}',
'%{Framed-Protocol}',              '%{Framed-IP-Address}',
 '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = "           INSERT INTO radacct
(acctsessionid,    acctuniqueid,     username,              realm,
   nasipaddress,     nasportid,              nasporttype,
 acctstarttime,    acctstoptime,              acctsessiontime,
 acctauthentic,    connectinfo_start,              connectinfo_stop,
acctinputoctets,  acctoutputoctets,              calledstationid,
 callingstationid, acctterminatecause,              servicetype,
 framedprotocol,   framedipaddress,              acctstartdelay,
acctstopdelay,    xascendsessionsvrkey)           VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
 '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}',              '%{NAS-Port-Type}', '%S', NULL,
 '0', '%{Acct-Authentic}', '%{Connect-Info}',              '', '0', '0',
           '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
 '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
   '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = "           UPDATE radacct SET
 acctstarttime     = '%S',              acctstartdelay    =
'%{%{Acct-Delay-Time}:-0}',              connectinfo_start =
'%{Connect-Info}'           WHERE acctsessionid  = '%{Acct-Session-Id}'
      AND username         = '%{SQL-User-Name}'           AND nasipaddress
    = '%{NAS-IP-Address}'"
accounting_stop_query = "           UPDATE radacct SET
 acctstoptime       = '%S',              acctsessiontime    =
'%{Acct-Session-Time}',              acctinputoctets    =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',              acctoutputoctets   =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}',              acctterminatecause =
'%{Acct-Terminate-Cause}',              acctstopdelay      =
'%{%{Acct-Delay-Time}:-0}',              connectinfo_stop   =
'%{Connect-Info}'           WHERE acctsessionid   = '%{Acct-Session-Id}'
        AND username          = '%{SQL-User-Name}'           AND
nasipaddress      = '%{NAS-IP-Address}'"
accounting_stop_query_alt = "           INSERT INTO radacct
(acctsessionid, acctuniqueid, username,              realm, nasipaddress,
nasportid,              nasporttype, acctstarttime, acctstoptime,
   acctsessiontime, acctauthentic, connectinfo_start,
 connectinfo_stop, acctinputoctets, acctoutputoctets,
 calledstationid, callingstationid, acctterminatecause,
 servicetype, framedprotocol, framedipaddress,              acctstartdelay,
acctstopdelay)           VALUES             ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}',              '%{SQL-User-Name}',
 '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
 '%{NAS-Port-Type}',              DATE_SUB('%S',                  INTERVAL
(%{%{Acct-Session-Time}:-0} +                  %{%{Acct-Delay-Time}:-0})
SECOND),              '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}',
'',              '%{Connect-Info}',
 '%{%{Acct-Input-Gigawords}:-0}' << 32 |
 '%{%{Acct-Input-Octets}:-0}',
 '%{%{Acct-Output-Gigawords}:-0}' << 32 |
 '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}',
'%{Calling-Station-Id}',              '%{Acct-Terminate-Cause}',
   '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
     '0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname           FROM radusergroup
      WHERE username = '%{SQL-User-Name}'           ORDER BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username,
                     nasipaddress, nasportid, framedipaddress,
                   callingstationid, framedprotocol
       FROM radacct                                WHERE username =
'%{SQL-User-Name}'                                AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth
(username, pass, reply, authdate)                           VALUES (
                    '%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Released sql socket id: 4
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating module "acct_unique" from file
/etc/freeradius/modules/acct_unique
  acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating module "detail" from file
/etc/freeradius/modules/detail
  detail {
detailfile =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
  }
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file
/etc/freeradius/modules/radutmp
  radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
  }
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/modules/attr_filter
  attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
  attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
  }
 } # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 192.168.1.134
port = 1812
}
listen {
type = "acct"
ipaddr = 192.168.1.134
port = 1813
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
 ... adding new socket proxy address * port 53488
Listening on authentication address 192.168.1.134 port 1812
Listening on accounting address 192.168.1.134 port 1813
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address 192.168.1.134 port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=123
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0200000a01526f676572
Message-Authenticator = 0xacfd48611b5bf251509d7c87051f4ea6
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 10
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[sql] expand: %{User-Name} -> Roger
[sql] sql_set_user escaped user --> 'Roger'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id, username, attribute, value, op           FROM
radcheck           WHERE username = '%{SQL-User-Name}'           ORDER BY
id -> SELECT id, username, attribute, value, op           FROM radcheck
      WHERE username = 'Roger'           ORDER BY id
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op           FROM
radreply           WHERE username = '%{SQL-User-Name}'           ORDER BY
id -> SELECT id, username, attribute, value, op           FROM radreply
      WHERE username = 'Roger'           ORDER BY id
[sql] expand: SELECT groupname           FROM radusergroup           WHERE
username = '%{SQL-User-Name}'           ORDER BY priority -> SELECT
groupname           FROM radusergroup           WHERE username = 'Roger'
        ORDER BY priority
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set.  Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!    Replacing User-Password in config items with Cleartext-Password.
!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Please update your configuration so that the "known good"
!!!
!!! clear text password is in Cleartext-Password, and not in User-Password.
!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message = 0x010100160410eec27c2d5ae0e5194e6ffad14031c95f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a32c7751d29f4e02a70d44a6
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=139
Cleaning up request 0 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a32c7751d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020100080319152b
Message-Authenticator = 0x83f5a682e7a110e06e3c3907c891632a
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 8
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[sql] expand: %{User-Name} -> Roger
[sql] sql_set_user escaped user --> 'Roger'
rlm_sql (sql): Reserving sql socket id: 2
[sql] expand: SELECT id, username, attribute, value, op           FROM
radcheck           WHERE username = '%{SQL-User-Name}'           ORDER BY
id -> SELECT id, username, attribute, value, op           FROM radcheck
      WHERE username = 'Roger'           ORDER BY id
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[sql] User found in radcheck table
[sql] expand: SELECT id, username, attribute, value, op           FROM
radreply           WHERE username = '%{SQL-User-Name}'           ORDER BY
id -> SELECT id, username, attribute, value, op           FROM radreply
      WHERE username = 'Roger'           ORDER BY id
[sql] expand: SELECT groupname           FROM radusergroup           WHERE
username = '%{SQL-User-Name}'           ORDER BY priority -> SELECT
groupname           FROM radusergroup           WHERE username = 'Roger'
        ORDER BY priority
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set.  Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!    Replacing User-Password in config items with Cleartext-Password.
!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!! Please update your configuration so that the "known good"
!!!
!!! clear text password is in Cleartext-Password, and not in User-Password.
!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a22f6a51d29f4e02a70d44a6
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=274
Cleaning up request 1 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a22f6a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0202008f19800000008516030100800100007c0301564d2bfa7661f3983bdffd87d0ed07af3bf587102c4e8cd89799bcd8e1b935cb00003400ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000ac007c011000500040100001f000a00080006001700180019000b0002010000050005010000000000120000
Message-Authenticator = 0xe34fb29a3e55a09c5d24209a8a41853c
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 143
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 133
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< Unknown TLS version [length 0005]
[peap] <<< TLS 1.0 Handshake [length 0080], ClientHello
[peap]     TLS_accept: unknown state
[peap] >>> Unknown TLS version [length 0005]
[peap] >>> TLS 1.0 Handshake [length 0039], ServerHello
[peap]     TLS_accept: unknown state
[peap] >>> Unknown TLS version [length 0005]
[peap] >>> TLS 1.0 Handshake [length 02ca], Certificate
[peap]     TLS_accept: unknown state
[peap] >>> Unknown TLS version [length 0005]
[peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
[peap]     TLS_accept: unknown state
[peap] >>> Unknown TLS version [length 0005]
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: unknown state
[peap]     TLS_accept: unknown state
[peap]     TLS_accept: unknown state
[peap]     TLS_accept: Need to read more data: unknown state
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0xb00f79ab95910999a2865fc1
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a12e6a51d29f4e02a70d44a6
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=137
Cleaning up request 2 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a12e6a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020300061900
Message-Authenticator = 0x0250778ac6d982d856d34ae7373a717d
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message =
0x010400761900137384072d800273752fa164043d3831297bc23b04310a9fef3833c1983a337b84343c113cae0a917f5541502062b7e4c8220b04dcce7452afc151e8f5c81842e91be3bf3b5eb571aba01c6c016ce08bd390ea8c1d269845906b09d08c8421a2242aaaa6f5f43416030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a0296a51d29f4e02a70d44a6
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=275
Cleaning up request 3 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a0296a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0204009019800000008616030100461000004241040f10c7fbfcfe339c630ab8c88276da3fba376780357b2d14e23f0e2db70069e14079e0b9860d84a708a6a9bef37ee88eebe260dd5d0e3a0fea977fe7fcd17b691403010001011603010030c6bdfa012c9fdefeb916132d4de9ff8c1a1a283f15441df6d8fc052629c748c4a44aff347500ca01dbece59fbc393856
Message-Authenticator = 0x57786aa1d5b675f65e684f0940291b62
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 144
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 134
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< Unknown TLS version [length 0005]
[peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
[peap]     TLS_accept: unknown state
[peap]     TLS_accept: unknown state
[peap] <<< Unknown TLS version [length 0005]
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< Unknown TLS version [length 0005]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: unknown state
[peap] >>> Unknown TLS version [length 0005]
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap]     TLS_accept: unknown state
[peap] >>> Unknown TLS version [length 0005]
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: unknown state
[peap]     TLS_accept: unknown state
[peap]     (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message =
0x0105004119001403010001011603010030f61da070708c43f6dcbe41409fdf2e51cef8af0256ad4b8828349c69c10ed97fe1e82b69230f4405d2b0100e3e3ec20a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a7286a51d29f4e02a70d44a6
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=137
Cleaning up request 4 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a7286a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020500061900
Message-Authenticator = 0xb6949019762097b54db555bcc6b9d8e3
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state TUNNEL ESTABLISHED
[peap] >>> Unknown TLS version [length 0005]
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message =
0x0106002b1900170301002068c18a036c48de0eb66bdbbf81b8787ae912570a2aef56f40ddbc40c13c0b9da
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a62b6a51d29f4e02a70d44a6
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=174
Cleaning up request 5 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a62b6a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0206002b190017030100204c3876f131f068fe79e951f813c5cb207e4016221643c7aea94152cb78abf875
Message-Authenticator = 0xbdfef7d06256d6eca1eb5496f1180756
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] <<< Unknown TLS version [length 0005]
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state WAITING FOR INNER IDENTITY
[peap] Identity - Roger
[peap] Got inner identity 'Roger'
[peap] Setting default EAP type for tunneled EAP session.
[peap] Got tunneled request
EAP-Message = 0x0206000a01526f676572
server  {
[peap] Setting User-Name to Roger
Sending tunneled request
EAP-Message = 0x0206000a01526f676572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "Roger"
server inner-tunnel {
# Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 6 length 10
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
EAP-Message =
0x0107001f1a0107001a100004ddc71e23923b2be4b11419c99909526f676572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8298ef44829ff58ff79b4166c44b0a5b
[peap] Got tunneled reply RADIUS code 11
EAP-Message =
0x0107001f1a0107001a100004ddc71e23923b2be4b11419c99909526f676572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8298ef44829ff58ff79b4166c44b0a5b
[peap] Got tunneled Access-Challenge
[peap] >>> Unknown TLS version [length 0005]
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message =
0x0107003b190017030100307b70512e13ec9b5d3f78eab651ac96375f3978054c49bda43168cc53dc066b892ae61bed91033e6dcc2295be608ea5b6
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a52a6a51d29f4e02a70d44a6
Finished request 6.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=238
Cleaning up request 6 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a52a6a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0207006b19001703010060f91730c057463659319d67a0cb0a0eaa899328ca1dcd043d97521f3fb09acc3c301ba9d5af3fe15a544aad005996d12bb9802b18b600a77fb0434e701b7fab642cfc6092e157dc279a7fa7d99499627db8f1bfe8d0f895ddc540cf79dbf99627
Message-Authenticator = 0x25fd8c0a7055dad08db9ad50c209d5f3
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 107
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] <<< Unknown TLS version [length 0005]
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state phase2
[peap] EAP type mschapv2
[peap] Got tunneled request
EAP-Message =
0x020700401a0207003b31eabc7c85d8a95307b769e4ba2c0d887700000000000000009753306f44120327dcf92e9b8955f68a63442b9c007d6f7200526f676572
server  {
[peap] Setting User-Name to Roger
Sending tunneled request
EAP-Message =
0x020700401a0207003b31eabc7c85d8a95307b769e4ba2c0d887700000000000000009753306f44120327dcf92e9b8955f68a63442b9c007d6f7200526f676572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "Roger"
State = 0x8298ef44829ff58ff79b4166c44b0a5b
server inner-tunnel {
# Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 7 length 64
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] # Executing group from file
/etc/freeradius/sites-enabled/inner-tunnel
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured.  Cannot create LM-Password.
[mschap] No Cleartext-Password configured.  Cannot create NT-Password.
[mschap] Creating challenge hash with username: Roger
[mschap] Told to do MS-CHAPv2 for Roger with NT-Password
[mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
} # server inner-tunnel
[peap] Got tunneled reply code 3
MS-CHAP-Error = "\007E=691 R=1"
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
MS-CHAP-Error = "\007E=691 R=1"
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
[peap] >>> Unknown TLS version [length 0005]
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.1.1 port 36934
EAP-Message =
0x0108002b1900170301002024a54b33cd00c91f3bc96de1a6a5e649fd987111d6535d05627943f2ade90bbf
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xa32d7303a4256a51d29f4e02a70d44a6
Finished request 7.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.1 port 36934, id=0,
length=174
Cleaning up request 7 ID 0 with timestamp +33
User-Name = "Roger"
NAS-IP-Address = 192.168.1.1
Called-Station-Id = "7824af7b1a5c"
Calling-Station-Id = "d4f46faaa693"
NAS-Identifier = "7824af7b1a5c"
NAS-Port = 31
Framed-MTU = 1400
State = 0xa32d7303a4256a51d29f4e02a70d44a6
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0208002b190017030100203f1b35d2fb7020ac9b9a174a085fdcdedc704e9385d24a06f68a55e15c5ff01d
Message-Authenticator = 0x15ca385972b2294e5667e36abeb2162d
# Executing section authorize from file
/etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "Roger", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] <<< Unknown TLS version [length 0005]
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state send tlv failure
[peap] Received EAP-TLV response.
[peap]  The users session was previously rejected: returning reject (again.)
[peap]  *** This means you need to read the PREVIOUS messages in the debug
output
[peap]  *** to find out the reason why the user was rejected.
[peap]  *** Look for "reject" or "fail".  Those earlier messages will tell
you.
[peap]  *** what went wrong, and how to fix the problem.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> Roger
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 8 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 8
Sending Access-Reject of id 0 to 192.168.1.1 port 36934
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 4.9 seconds.
Cleaning up request 8 ID 0 with timestamp +33
Ready to process requests.


More information about the Freeradius-Users mailing list