acct_unique problem

[Alan DeKok]

On Feb 8, 2016, at 10:32 AM, Viana <freeradius at radius.net.br> wrote:
> 
> Hello! Last post was messed up because HTML format was on. So, I´ll try again. Sorry about that.

  That helps, thanks.

> Then simulated an error: Quit FreeRadius, then I disconnected the client. Then I turned on the server and the client connected again.

  That should work.

> I realized that acctuniqueid was created differently:
> 
> (0) Received Access-Request Id 253 from 192.168.0.1:36215 to 192.168.0.98:1812 length 144
> (0)   Service-Type = Framed-User
> (0)   Framed-Protocol = PPP
> (0)   NAS-Port = 15729402
> (0)   NAS-Port-Type = Ethernet
> (0)   User-Name = "test"
> (0)   Calling-Station-Id = "C0:4A:00:87:C6:D9"
> (0)   Called-Station-Id = "service1"
> (0)   NAS-Port-Id = "bridge1"
> (0)   CHAP-Challenge = 0x14fabff364f33d09f97a7992e7658be9
> (0)   CHAP-Password = 0x011ad42c708f1b1279142669b5d1d20f23
> (0)   NAS-Identifier = "Main_Router"
> (0)   NAS-IP-Address = 192.168.0.1
> (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
> (0)   authorize {

  Ok...

> (0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
> -r: not found
> (0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
> (0)   preacct {
> (0)     [preprocess] = ok

  Uh... what did you do?

  You've managed to configure the server so that it runs an Access-Request packet through the "preacct" section.

  That's wrong on so many levels.

  Whatever you're doing, stop.  Go back to the default configuration.  It works.

  Alan DeKok.