Dynamic Vlan Attributes are not always attached to access-accept

Vlad Kratsberg vkratsberg at gmail.com
Tue Jul 26 21:46:01 CEST 2016


Nm,

I think i got it to work, at least cache properly using hints from this
post:

comments.gmane.org/gmane.comp.freeradius.user/105995

I can see vlan being cached now.

On Tue, Jul 26, 2016 at 11:02 AM, Vlad Kratsberg <vkratsberg at gmail.com>
wrote:

> Hi,
>
> We are running freeradius 3.0.11 with peap over gtc.  I noticed that
> sometimes my test clients don't have an ip address.  I did a packet capture
> during client re-authentication and discovered that freeradius doesn't
> always return dynamic vlan attributes back to switch, thus forcing the
> switch port to go into vlan "default" instead of configured vlan value.
> Any idea what might be causing this ?
>
> This happens intermittently with or without caching enabled.
>
> Alan, you mentioned that there is an problem with caching in version
> 3.0.11 and recommended upgrading to 3.1.  Should't freeradius always return
> vlan attributes if caching is disabled ?
>
> My configs are below.
>
> Appreciate your help.
>
> Thank you
>
> Redirecting to /bin/systemctl stop  radiusd.service
> [root at radius001 vkratsberg]# radiusd -X
> Server was built with:
>   accounting               : yes
>   authentication           : yes
>   ascend-binary-attributes : yes
>   coa                      : yes
>   control-socket           : yes
>   detail                   : yes
>   dhcp                     : yes
>   dynamic-clients          : yes
>   osfc2                    : no
>   proxy                    : yes
>   regex-pcre               : yes
>   regex-posix              : no
>   regex-posix-extended     : no
>   session-management       : yes
>   stats                    : yes
>   tcp                      : yes
>   threads                  : yes
>   tls                      : yes
>   unlang                   : yes
>   vmps                     : yes
>   developer                : no
> Server core libs:
>   freeradius-server        : 3.0.11
>   talloc                   : 2.0.*
>   ssl                      : 1.0.1e release
>   pcre                     : 8.32 2012-11-30
> Endianness:
>   little
> Compilation flags:
>   cppflags :
>   cflags   : -I/root/rpmbuild/BUILD/freeradius-server-3.0.11
> -I/root/rpmbuild/BUILD/freeradius-server-3.0.11/src -include
> /root/rpmbuild/BUILD/freeradius-server-3.0.11/src/freeradius-devel/autoconf.h
> -include
> /root/rpmbuild/BUILD/freeradius-server-3.0.11/src/freeradius-devel/build.h
> -include
> /root/rpmbuild/BUILD/freeradius-server-3.0.11/src/freeradius-devel/features.h
> -include
> /root/rpmbuild/BUILD/freeradius-server-3.0.11/src/freeradius-devel/radpaths.h
> -fno-strict-aliasing -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
> -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4
> -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64
> -mtune=generic -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT
> -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
>   ldflags  :  -Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld
>   libs     : -lcrypto -lssl -ltalloc -lpcre -lnsl -lresolv -ldl -lpthread
> -lreadline
>
> Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/raddb/dictionary
> including configuration file /etc/raddb/radiusd.conf
> including configuration file /etc/raddb/proxy.conf
> including configuration file /etc/raddb/clients.conf
> including files in directory /etc/raddb/mods-enabled/
> including configuration file /etc/raddb/mods-enabled/always
> including configuration file /etc/raddb/mods-enabled/attr_filter
> including configuration file /etc/raddb/mods-enabled/cache_eap
> including configuration file /etc/raddb/mods-enabled/chap
> including configuration file /etc/raddb/mods-enabled/detail
> including configuration file /etc/raddb/mods-enabled/detail.log
> including configuration file /etc/raddb/mods-enabled/dhcp
> including configuration file /etc/raddb/mods-enabled/digest
> including configuration file /etc/raddb/mods-enabled/dynamic_clients
> including configuration file /etc/raddb/mods-enabled/eap
> including configuration file /etc/raddb/mods-enabled/echo
> including configuration file /etc/raddb/mods-enabled/exec
> including configuration file /etc/raddb/mods-enabled/expiration
> including configuration file /etc/raddb/mods-enabled/expr
> including configuration file /etc/raddb/mods-enabled/files
> including configuration file /etc/raddb/mods-enabled/linelog
> including configuration file /etc/raddb/mods-enabled/logintime
> including configuration file /etc/raddb/mods-enabled/mschap
> including configuration file /etc/raddb/mods-enabled/ntlm_auth
> including configuration file /etc/raddb/mods-enabled/pap
> including configuration file /etc/raddb/mods-enabled/passwd
> including configuration file /etc/raddb/mods-enabled/preprocess
> including configuration file /etc/raddb/mods-enabled/radutmp
> including configuration file /etc/raddb/mods-enabled/realm
> including configuration file /etc/raddb/mods-enabled/replicate
> including configuration file /etc/raddb/mods-enabled/soh
> including configuration file /etc/raddb/mods-enabled/sradutmp
> including configuration file /etc/raddb/mods-enabled/unix
> including configuration file /etc/raddb/mods-enabled/unpack
> including configuration file /etc/raddb/mods-enabled/utf8
> including configuration file /etc/raddb/mods-enabled/ldap
> including files in directory /etc/raddb/policy.d/
> including configuration file /etc/raddb/policy.d/abfab-tr
> including configuration file /etc/raddb/policy.d/accounting
> including configuration file /etc/raddb/policy.d/canonicalization
> including configuration file /etc/raddb/policy.d/control
> including configuration file /etc/raddb/policy.d/cui
> including configuration file /etc/raddb/policy.d/debug
> including configuration file /etc/raddb/policy.d/dhcp
> including configuration file /etc/raddb/policy.d/eap
> including configuration file /etc/raddb/policy.d/filter
> including configuration file /etc/raddb/policy.d/operator-name
> including files in directory /etc/raddb/sites-enabled/
> including configuration file /etc/raddb/sites-enabled/default
> including configuration file /etc/raddb/sites-enabled/inner-tunnel
> main {
>  security {
>   user = "radiusd"
>   group = "radiusd"
>   allow_core_dumps = no
>  }
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> libdir = "/usr/lib64/freeradius"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
>  log {
>   stripped_names = no
>   auth = no
>   auth_badpass = no
>   auth_goodpass = no
>   colourise = yes
>   msg_denied = "You are already logged in - access denied"
>  }
>  resources {
>  }
>  security {
>   max_attributes = 200
>   reject_delay = 1.000000
>   status_server = yes
>  }
> }
> radiusd: #### Loading Realms and Home Servers ####
>  proxy server {
>   retry_delay = 5
>   retry_count = 3
>   default_fallback = no
>   dead_time = 120
>   wake_all_if_all_dead = no
>  }
>  home_server localhost {
>   ipaddr = 127.0.0.1
>   port = 1812
>   type = "auth"
>   secret = <<< secret >>>
>   response_window = 20.000000
>   response_timeouts = 1
>   max_outstanding = 65536
>   zombie_period = 40
>   status_check = "status-server"
>   ping_interval = 30
>   check_interval = 30
>   check_timeout = 4
>   num_answers_to_alive = 3
>   revive_interval = 120
>   limit {
>   max_connections = 16
>   max_requests = 0
>   lifetime = 0
>   idle_timeout = 0
>   }
>   coa {
>   irt = 2
>   mrt = 16
>   mrc = 5
>   mrd = 30
>   }
>  }
>  home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
>  }
>  realm example.com {
> auth_pool = my_auth_failover
>  }
>  realm LOCAL {
>  }
> radiusd: #### Loading Clients ####
>  client localhost {
>   ipv4addr = 127.0.0.1
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   nas_type = "other"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 192.168.10.0/24 {
>   ipv4addr = 192.168.10.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "nyc-mgmt-network"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.120.8.0/24 {
>   ipv4addr = 10.120.8.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "da-oob-internal"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.120.225.0/24 {
>   ipv4addr = 10.120.225.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "da-mgmt-network"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.120.22.0/24 {
>   ipv4addr = 10.120.22.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "da3-int-transit-net"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.100.124.0/22 {
>   ipv4addr = 10.100.124.0/22
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "peer1-mgmt-network"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.8.0.0/24 {
>   ipv4addr = 10.8.0.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "nyc-hq"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.11.10.15/32 {
>   ipv4addr = 10.11.10.15/32
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "test-sw2200"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.11.10.16/32 {
>   ipv4addr = 10.11.10.16/32
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "test-sw4200"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.150.0.0/16 {
>   ipv4addr = 10.150.0.0/16
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "dublin-corp"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.126.0.0/16 {
>   ipv4addr = 10.126.0.0/16
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "portland-corp"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.100.0.0/24 {
>   ipv4addr = 10.100.0.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "peer1-loopbacks"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.120.0.0/24 {
>   ipv4addr = 10.120.0.0/24
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "dallas-loopbacks"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 10.100.72.100/32 {
>   ipv4addr = 10.100.72.100
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "peer1-wlc-master"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 192.168.1.68 {
>   ipv4addr = 192.168.1.68
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "admin01"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
>  client 192.168.1.8 {
>   ipv4addr = 192.168.1.8
>   require_message_authenticator = no
>   secret = <<< secret >>>
>   shortname = "admin08"
>   limit {
>   max_connections = 16
>   lifetime = 0
>   idle_timeout = 30
>   }
>  }
> Debugger not attached
>  # Creating Auth-Type = PAP
>  # Creating Auth-Type = CHAP
>  # Creating Auth-Type = MS-CHAP
>  # Creating Auth-Type = digest
>  # Creating Auth-Type = eap
> radiusd: #### Instantiating modules ####
>  modules {
>   # Loaded module rlm_always
>   # Loading module "reject" from file /etc/raddb/mods-enabled/always
>   always reject {
>   rcode = "reject"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "fail" from file /etc/raddb/mods-enabled/always
>   always fail {
>   rcode = "fail"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "ok" from file /etc/raddb/mods-enabled/always
>   always ok {
>   rcode = "ok"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "handled" from file /etc/raddb/mods-enabled/always
>   always handled {
>   rcode = "handled"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "invalid" from file /etc/raddb/mods-enabled/always
>   always invalid {
>   rcode = "invalid"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "userlock" from file /etc/raddb/mods-enabled/always
>   always userlock {
>   rcode = "userlock"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "notfound" from file /etc/raddb/mods-enabled/always
>   always notfound {
>   rcode = "notfound"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "noop" from file /etc/raddb/mods-enabled/always
>   always noop {
>   rcode = "noop"
>   simulcount = 0
>   mpp = no
>   }
>   # Loading module "updated" from file /etc/raddb/mods-enabled/always
>   always updated {
>   rcode = "updated"
>   simulcount = 0
>   mpp = no
>   }
>   # Loaded module rlm_attr_filter
>   # Loading module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.post-proxy {
>   filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>   key = "%{Realm}"
>   relaxed = no
>   }
>   # Loading module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.pre-proxy {
>   filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>   key = "%{Realm}"
>   relaxed = no
>   }
>   # Loading module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.access_reject {
>   filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>   key = "%{User-Name}"
>   relaxed = no
>   }
>   # Loading module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.access_challenge {
>   filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>   key = "%{User-Name}"
>   relaxed = no
>   }
>   # Loading module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.accounting_response {
>   filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
>   key = "%{User-Name}"
>   relaxed = no
>   }
>   # Loaded module rlm_cache
>   # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>   cache cache_eap {
>   driver = "rlm_cache_rbtree"
>   key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>   ttl = 15
>   max_entries = 0
>   epoch = 0
>   add_stats = no
>   }
>   # Loaded module rlm_chap
>   # Loading module "chap" from file /etc/raddb/mods-enabled/chap
>   # Loaded module rlm_detail
>   # Loading module "detail" from file /etc/raddb/mods-enabled/detail
>   detail {
>   filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>   header = "%t"
>   permissions = 384
>   locking = no
>   escape_filenames = no
>   log_packet_header = no
>   }
>   # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>   detail auth_log {
>   filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>   header = "%t"
>   permissions = 384
>   locking = no
>   escape_filenames = no
>   log_packet_header = no
>   }
>   # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
>   detail reply_log {
>   filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>   header = "%t"
>   permissions = 384
>   locking = no
>   escape_filenames = no
>   log_packet_header = no
>   }
>   # Loading module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   detail pre_proxy_log {
>   filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>   header = "%t"
>   permissions = 384
>   locking = no
>   escape_filenames = no
>   log_packet_header = no
>   }
>   # Loading module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   detail post_proxy_log {
>   filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>   header = "%t"
>   permissions = 384
>   locking = no
>   escape_filenames = no
>   log_packet_header = no
>   }
>   # Loaded module rlm_dhcp
>   # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
>   # Loaded module rlm_digest
>   # Loading module "digest" from file /etc/raddb/mods-enabled/digest
>   # Loaded module rlm_dynamic_clients
>   # Loading module "dynamic_clients" from file
> /etc/raddb/mods-enabled/dynamic_clients
>   # Loaded module rlm_eap
>   # Loading module "eap" from file /etc/raddb/mods-enabled/eap
>   eap {
>   default_eap_type = "peap"
>   timer_expire = 60
>   ignore_unknown_eap_types = no
>   cisco_accounting_username_bug = no
>   max_sessions = 16384
>   }
>   # Loaded module rlm_exec
>   # Loading module "echo" from file /etc/raddb/mods-enabled/echo
>   exec echo {
>   wait = yes
>   program = "/bin/echo %{User-Name}"
>   input_pairs = "request"
>   output_pairs = "reply"
>   shell_escape = yes
>   }
>   # Loading module "exec" from file /etc/raddb/mods-enabled/exec
>   exec {
>   wait = no
>   input_pairs = "request"
>   shell_escape = yes
>   timeout = 10
>   }
>   # Loaded module rlm_expiration
>   # Loading module "expiration" from file
> /etc/raddb/mods-enabled/expiration
>   # Loaded module rlm_expr
>   # Loading module "expr" from file /etc/raddb/mods-enabled/expr
>   expr {
>   safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>   }
>   # Loaded module rlm_files
>   # Loading module "files" from file /etc/raddb/mods-enabled/files
>   files {
>   filename = "/etc/raddb/mods-config/files/authorize"
>   acctusersfile = "/etc/raddb/mods-config/files/accounting"
>   preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>   }
>   # Loaded module rlm_linelog
>   # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
>   linelog {
>   filename = "/var/log/radius/linelog"
>   escape_filenames = no
>   syslog_severity = "info"
>   permissions = 384
>   format = "This is a log message for %{User-Name}"
>   reference = "messages.%{%{reply:Packet-Type}:-default}"
>   }
>   # Loading module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
>   linelog log_accounting {
>   filename = "/var/log/radius/linelog-accounting"
>   escape_filenames = no
>   syslog_severity = "info"
>   permissions = 384
>   format = ""
>   reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>   }
>   # Loaded module rlm_logintime
>   # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
>   logintime {
>   minimum_timeout = 60
>   }
>   # Loaded module rlm_mschap
>   # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
>   mschap {
>   use_mppe = yes
>   require_encryption = no
>   require_strong = no
>   with_ntdomain_hack = yes
>    passchange {
>    }
>   allow_retry = yes
>   }
>   # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>   exec ntlm_auth {
>   wait = yes
>   program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
>   shell_escape = yes
>   }
>   # Loaded module rlm_pap
>   # Loading module "pap" from file /etc/raddb/mods-enabled/pap
>   pap {
>   normalise = yes
>   }
>   # Loaded module rlm_passwd
>   # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>   passwd etc_passwd {
>   filename = "/etc/passwd"
>   format = "*User-Name:Crypt-Password:"
>   delimiter = ":"
>   ignore_nislike = no
>   ignore_empty = yes
>   allow_multiple_keys = no
>   hash_size = 100
>   }
>   # Loaded module rlm_preprocess
>   # Loading module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
>   preprocess {
>   huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>   hints = "/etc/raddb/mods-config/preprocess/hints"
>   with_ascend_hack = no
>   ascend_channels_per_line = 23
>   with_ntdomain_hack = no
>   with_specialix_jetstream_hack = no
>   with_cisco_vsa_hack = no
>   with_alvarion_vsa_hack = no
>   }
>   # Loaded module rlm_radutmp
>   # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>   radutmp {
>   filename = "/var/log/radius/radutmp"
>   username = "%{User-Name}"
>   case_sensitive = yes
>   check_with_nas = yes
>   permissions = 384
>   caller_id = yes
>   }
>   # Loaded module rlm_realm
>   # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
>   realm IPASS {
>   format = "prefix"
>   delimiter = "/"
>   ignore_default = no
>   ignore_null = no
>   }
>   # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
>   realm suffix {
>   format = "suffix"
>   delimiter = "@"
>   ignore_default = no
>   ignore_null = no
>   }
>   # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
>   realm realmpercent {
>   format = "suffix"
>   delimiter = "%"
>   ignore_default = no
>   ignore_null = no
>   }
>   # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
>   realm ntdomain {
>   format = "prefix"
>   delimiter = "\\"
>   ignore_default = no
>   ignore_null = no
>   }
>   # Loaded module rlm_replicate
>   # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
>   # Loaded module rlm_soh
>   # Loading module "soh" from file /etc/raddb/mods-enabled/soh
>   soh {
>   dhcp = yes
>   }
>   # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>   radutmp sradutmp {
>   filename = "/var/log/radius/sradutmp"
>   username = "%{User-Name}"
>   case_sensitive = yes
>   check_with_nas = yes
>   permissions = 420
>   caller_id = no
>   }
>   # Loaded module rlm_unix
>   # Loading module "unix" from file /etc/raddb/mods-enabled/unix
>   unix {
>   radwtmp = "/var/log/radius/radwtmp"
>   }
> Creating attribute Unix-Group
>   # Loaded module rlm_unpack
>   # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
>   # Loaded module rlm_utf8
>   # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
>   # Loaded module rlm_ldap
>   # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
>   ldap {
>   server = "ldap001.008.jfk.corp.squarespace.net"
>   port = 636
>   identity = "cn=directory manager"
>   password = <<< secret >>>
>    sasl {
>    }
>    user {
>     scope = "sub"
>     access_positive = yes
>     sasl {
>     }
>    }
>    group {
>     filter = "(objectClass=GroupOfNames)"
>     scope = "sub"
>     name_attribute = "cn"
>     membership_attribute = "memberOf"
>     membership_filter =
> "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))"
>     cacheable_name = no
>     cacheable_dn = no
>    }
>    client {
>     filter = "(objectClass=frClient)"
>     scope = "sub"
>     base_dn = "dc=sq,dc=net"
>    }
>    profile {
>    }
>    options {
>     ldap_debug = 40
>     chase_referrals = yes
>     rebind = yes
>     net_timeout = 1
>     res_timeout = 20
>     srv_timelimit = 20
>     idle = 60
>     probes = 3
>     interval = 3
>    }
>    tls {
>     start_tls = no
>     require_cert = "allow"
>    }
>   }
> Creating attribute LDAP-Group
>   instantiate {
>   }
>   # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "userlock" from file
> /etc/raddb/mods-enabled/always
>   # Instantiating module "notfound" from file
> /etc/raddb/mods-enabled/always
>   # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>   # Instantiating module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>   # Instantiating module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
>   # Instantiating module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>   # Instantiating module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /etc/raddb/mods-config/attr_filter/accounting_response
>   # Instantiating module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
>   # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>   # Instantiating module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
>   # Instantiating module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
>   # Instantiating module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   # Instantiating module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>    # Linked to sub-module rlm_eap_md5
>    # Linked to sub-module rlm_eap_leap
>    # Linked to sub-module rlm_eap_gtc
>    gtc {
>     challenge = "Password: "
>     auth_type = "PAP"
>    }
>    # Linked to sub-module rlm_eap_tls
>    tls {
>     tls = "tls-common"
>    }
>    tls-config tls-common {
>     verify_depth = 0
>     ca_path = "/etc/raddb/certs"
>     pem_file_type = yes
>     private_key_file = "/etc/raddb/certs/server.pem"
>     certificate_file = "/etc/raddb/certs/server.pem"
>     ca_file = "/etc/raddb/certs/ca.pem"
>     private_key_password = <<< secret >>>
>     dh_file = "/etc/raddb/certs/dh"
>     fragment_size = 1024
>     include_length = yes
>     auto_chain = yes
>     check_crl = no
>     check_all_crl = no
>     cipher_list = "DEFAULT"
>     ecdh_curve = "prime256v1"
>     cache {
>     enable = yes
>     lifetime = 24
>     max_entries = 255
>     }
>     verify {
>     skip_if_ocsp_ok = no
>     }
>     ocsp {
>     enable = no
>     override_cert_url = yes
>     url = "http://127.0.0.1/ocsp/"
>     use_nonce = yes
>     timeout = 0
>     softfail = no
>     }
>    }
>    # Linked to sub-module rlm_eap_ttls
>    ttls {
>     tls = "tls-common"
>     default_eap_type = "md5"
>     copy_request_to_tunnel = no
>     use_tunneled_reply = no
>     virtual_server = "inner-tunnel"
>     include_length = yes
>     require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_peap
>    peap {
>     tls = "tls-common"
>     default_eap_type = "gtc"
>     copy_request_to_tunnel = no
>     use_tunneled_reply = yes
>     proxy_tunneled_request_as_eap = yes
>     virtual_server = "inner-tunnel"
>     soh = no
>     require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_mschapv2
>    mschapv2 {
>     with_ntdomain_hack = no
>     send_error = no
>    }
>   # Instantiating module "expiration" from file
> /etc/raddb/mods-enabled/expiration
>   # Instantiating module "files" from file /etc/raddb/mods-enabled/files
> reading pairlist file /etc/raddb/mods-config/files/authorize
> reading pairlist file /etc/raddb/mods-config/files/accounting
> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>   # Instantiating module "linelog" from file
> /etc/raddb/mods-enabled/linelog
>   # Instantiating module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
>   # Instantiating module "logintime" from file
> /etc/raddb/mods-enabled/logintime
>   # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
>   # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>   # Instantiating module "etc_passwd" from file
> /etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>   # Instantiating module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>   # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>   # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>   # Instantiating module "realmpercent" from file
> /etc/raddb/mods-enabled/realm
>   # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
>   # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20440
>    accounting {
>     reference = "%{tolower:type.%{Acct-Status-Type}}"
>    }
>    post-auth {
>     reference = "."
>    }
> rlm_ldap (ldap): Initialising connection pool
>    pool {
>     start = 5
>     min = 4
>     max = 32
>     spare = 3
>     uses = 0
>     lifetime = 0
>     cleanup_interval = 30
>     idle_timeout = 60
>     retry_delay = 1
>     spread = no
>    }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://
> ldap001.008.jfk.corp.squarespace.net:636
> TLS: certificate [CN=sqnet CA,DC=sq,DC=net] is not valid - error
> -8172:Peer's certificate issuer has been marked as not trusted by the user..
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://
> ldap001.008.jfk.corp.squarespace.net:636
> TLS: certificate [CN=sqnet CA,DC=sq,DC=net] is not valid - error
> -8172:Peer's certificate issuer has been marked as not trusted by the user..
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://
> ldap001.008.jfk.corp.squarespace.net:636
> TLS: certificate [CN=sqnet CA,DC=sq,DC=net] is not valid - error
> -8172:Peer's certificate issuer has been marked as not trusted by the user..
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://
> ldap001.008.jfk.corp.squarespace.net:636
> TLS: certificate [CN=sqnet CA,DC=sq,DC=net] is not valid - error
> -8172:Peer's certificate issuer has been marked as not trusted by the user..
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://
> ldap001.008.jfk.corp.squarespace.net:636
> TLS: certificate [CN=sqnet CA,DC=sq,DC=net] is not valid - error
> -8172:Peer's certificate issuer has been marked as not trusted by the user..
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
>  } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/raddb/radiusd.conf
> } # server
> server default { # from file /etc/raddb/sites-enabled/default
>  # Loading authenticate {...}
>  # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
>  # Loading preacct {...}
>  # Loading accounting {...}
>  # Loading post-proxy {...}
>  # Loading post-auth {...}
> } # server default
> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>  # Loading authenticate {...}
>  # Loading authorize {...}
>  # Loading session {...}
>  # Loading post-proxy {...}
>  # Loading post-auth {...}
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
>   type = "auth"
>   ipaddr = *
>   port = 0
>    limit {
>     max_connections = 16
>     lifetime = 0
>     idle_timeout = 30
>    }
> }
> listen {
>   type = "acct"
>   ipaddr = *
>   port = 0
>    limit {
>     max_connections = 16
>     lifetime = 0
>     idle_timeout = 30
>    }
> }
> listen {
>   type = "auth"
>   ipv6addr = ::
>   port = 0
>    limit {
>     max_connections = 16
>     lifetime = 0
>     idle_timeout = 30
>    }
> }
> listen {
>   type = "acct"
>   ipv6addr = ::
>   port = 0
>    limit {
>     max_connections = 16
>     lifetime = 0
>     idle_timeout = 30
>    }
> }
> listen {
>   type = "auth"
>   ipaddr = 127.0.0.1
>   port = 18120
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 39223
> Listening on proxy address :: port 8371
> Ready to process requests
>
>
>
>
>


More information about the Freeradius-Users mailing list