Freeradius-Users Digest, Vol 137, Issue 5

Peter Hutchison p.j.hutchison at hud.ac.uk
Fri Sep 2 16:44:22 CEST 2016


#Is this user a user in the Freeradius Users file or are you authenticating against AD domain?
If AD, check the ntlm_auth module and change path to file and enter domain name. Also check ldap module.

Peter Hutchison
Senior Network Systems Specialist
Networks Team
Computing Services
University of Huddersfield

-----Original Message-----
From: Freeradius-Users [mailto:freeradius-users-bounces+p.j.hutchison=hud.ac.uk at lists.freeradius.org] On Behalf Of freeradius-users-request at lists.freeradius.org
Sent: 02 September 2016 13:50
To: freeradius-users at lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 137, Issue 5

Send Freeradius-Users mailing list submissions to
        freeradius-users at lists.freeradius.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
        freeradius-users-request at lists.freeradius.org

You can reach the person managing the list at
        freeradius-users-owner at lists.freeradius.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Freeradius-Users digest..."


Today's Topics:

   1. EAP-TTLS Not working (Matthew Pulis)


----------------------------------------------------------------------

Message: 1
Date: Fri, 2 Sep 2016 14:49:31 +0200
From: Matthew Pulis <mpulis at gmail.com>
To: freeradius-users at lists.freeradius.org
Subject: EAP-TTLS Not working
Message-ID:
        <CAAHh=teHj5H6RPYSfBc3VcANA3HSY=qTZ_8zf=NvsDgprCj8PA at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Dear friends,

I am trying to get EAP-TTLS working but to no avail. I am using Android
tablet to test this WiFi connection. These are the settings: EAP method:
TTLS. Phase 2 authentication: None. CA certificate (unspecified). Identity:
mpulis. Anonymous identity: <BLANK> and Password: openldap.

I have followed these tutorials for the task:
http://www.sosdg.org/unifi/freeradius and
http://deployingradius.com/documents/configuration/certificates.html

Any pointers as to where should I start searching for the bug please?

Thanks and best regards


The user if tested using radtest works find as per below:

radius at radius:~$ radtest mpulis openldap localhost 1812 testing456
Sent Access-Request Id 95 from 0.0.0.0:39322 to 127.0.0.1:1812 length 76
        User-Name = "mpulis"
        User-Password = "openldap"
        NAS-IP-Address = 127.0.1.1
        NAS-Port = 1812
        Message-Authenticator = 0x00
        Cleartext-Password = "openldap"
Received Access-Accept Id 95 from 127.0.0.1:1812 to 0.0.0.0:0 length 36
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = 802
        Tunnel-Private-Group-Id:0 = "11"


This is the log:

radius at daloradius:/etc/freeradius/mods-enabled$ sudo freeradius -X
Server was built with:
  accounting               : yes
  authentication           : yes
  ascend-binary-attributes : yes
  coa                      : yes
  control-socket           : yes
  detail                   : yes
  dhcp                     : yes
  dynamic-clients          : yes
  osfc2                    : no
  proxy                    : yes
  regex-pcre               : no
  regex-posix              : yes
  regex-posix-extended     : yes
  session-management       : yes
  stats                    : yes
  tcp                      : yes
  threads                  : yes
  tls                      : yes
  unlang                   : yes
  vmps                     : yes
  developer                : no
Server core libs:
  freeradius-server        : 3.0.11
  talloc                   : 2.0.*
  ssl                      : 1.0.2g release
Endianness:
  little
Compilation flags:
  cppflags : -Wdate-time -D_FORTIFY_SOURCE=2
  cflags   : -I/build/freeradius-G88Mfz/freeradius-3.0.11
-I/build/freeradius-G88Mfz/freeradius-3.0.11/src -include
/build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/autoconf.h
-include
/build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/build.h
-include
/build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/features.h
-include
/build/freeradius-G88Mfz/freeradius-3.0.11/src/freeradius-devel/radpaths.h
-fno-strict-aliasing -g -O2 -fstack-protector-strong -Wformat
-Werror=format-security -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT
-D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
  ldflags  :  -Wl,-Bsymbolic-functions -Wl,-z,relro
  libs     : -lcrypto -lssl -ltalloc -lcap -lnsl -lresolv -ldl -lpthread
-lreadline

Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/ldap
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/replicate
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/operator-name
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 192.168.100.0/24 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "NAS"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
192.168.100.0/24. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = eap
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_detail
  # Loading module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
  ldap {
        server = "localhost"
        identity = "cn=admin,dc=seminary,dc=local"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
        filename = "/etc/freeradius/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/etc/freeradius/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/mods-enabled/replicate
  instantiate {
  }
  # Instantiating module "mschap" from file
/etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "reject" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/certs"
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.pem"
        certificate_file = "/etc/freeradius/certs/server.pem"
        ca_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        ecdh_curve = "prime256v1"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "IPASS" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20442
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "files" from file
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "detail" from file
/etc/freeradius/mods-enabled/detail
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"       found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"  found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 38374
Listening on proxy address :: port 37379
Ready to process requests


















(0) Received Access-Request Id 9 from 192.168.100.110:52775 to
192.168.100.201:1812 length 165
(0)   User-Name = "mpulis"
(0)   NAS-Identifier = "802aa849c3a3"
(0)   NAS-Port = 0
(0)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(0)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   EAP-Message = 0x02ba000b016d70756c6973
(0)   Message-Authenticator = 0xaaef39af5f9edef0ef2ad9504b9c5bb0
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 186 length 11
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 187 length 22
(0) eap: EAP session adding &reply:State = 0x104c8eb010f78ae8
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(0)   EAP-Message = 0x01bb00160410348177de91c185206602fa64ec1f1d91
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x104c8eb010f78ae8aa68bc37dd34ca62
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 10 from 192.168.100.110:52775 to
192.168.100.201:1812 length 178
(1)   User-Name = "mpulis"
(1)   NAS-Identifier = "802aa849c3a3"
(1)   NAS-Port = 0
(1)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(1)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   EAP-Message = 0x02bb00060315
(1)   State = 0x104c8eb010f78ae8aa68bc37dd34ca62
(1)   Message-Authenticator = 0x2135a54adb340c1b4102b16da3655606
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 187 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap:    --> (cn=mpulis)
(1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
filter "(cn=mpulis)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN
"cn=mpulis,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header +=
'{ssha}VlINJtlRL+9CuOK5itOeTIvRfwKRSNj9xllpiQ=='
rlm_ldap (ldap): Released connection (0)
rlm_ldap (ldap): Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1)     [ldap] = updated
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: Converted: Password-With-Header -> SSHA1-Password
(1) pap: Removing &control:Password-With-Header
(1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
bytes
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x104c8eb010f78ae8
(1) eap: Finished EAP session with state 0x104c8eb010f78ae8
(1) eap: Previous EAP request found for state 0x104c8eb010f78ae8, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Initiating new EAP-TLS session
(1) eap_ttls: Flushing SSL sessions (of #0)
(1) eap_ttls: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 188 length 6
(1) eap: EAP session adding &reply:State = 0x104c8eb011f09be8
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Sent Access-Challenge Id 10 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(1)   EAP-Message = 0x01bc00061520
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x104c8eb011f09be8aa68bc37dd34ca62
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 11 from 192.168.100.110:52775 to
192.168.100.201:1812 length 364
(2)   User-Name = "mpulis"
(2)   NAS-Identifier = "802aa849c3a3"
(2)   NAS-Port = 0
(2)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(2)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   EAP-Message =
0x02bc00c0150016030100b5010000b10301635e04e1f20347ded5351b49fab63311368cc67eb2b49527653206d0cb46db62000048c014c00a00390038c00fc0050035c013c00900330032c00ec004002fc011c007c00cc00200050004c012c00800160013c00dc003000a00150012000900140011000800
(2)   State = 0x104c8eb011f09be8aa68bc37dd34ca62
(2)   Message-Authenticator = 0xc2a0353f1c22341ba7578ac17036fafb
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 188 length 192
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x104c8eb011f09be8
(2) eap: Finished EAP session with state 0x104c8eb011f09be8
(2) eap: Previous EAP request found for state 0x104c8eb011f09be8, released
from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: [eaptls verify] = ok
(2) eap_ttls: Done initial handshake
(2) eap_ttls: (other): before/accept initialization
(2) eap_ttls: TLS_accept: before/accept initialization
(2) eap_ttls: <<< recv TLS 1.0 Handshake [length 00b5], ClientHello
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 0059], ServerHello
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 0973], Certificate
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: TLS_accept: unknown state
(2) eap_ttls: TLS_accept: Need to read more data: unknown state
(2) eap_ttls: TLS_accept: Need to read more data: unknown state
(2) eap_ttls: In SSL Handshake Phase
(2) eap_ttls: In SSL Accept mode
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 189 length 1004
(2) eap: EAP session adding &reply:State = 0x104c8eb012f19be8
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Sent Access-Challenge Id 11 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(2)   EAP-Message =
0x01bd03ec15c000000b2f160301005902000055030133073b184afb1feef297f3164815c21099158983f83ee7f25eb3821fd31703f720c599ffe4eaa786771dc7974e667498641e729025b153959071566d3fe4ec6e25c01400000dff01000100000b00040300010216030109730b00096f00096c000420
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x104c8eb012f19be8aa68bc37dd34ca62
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 12 from 192.168.100.110:52775 to
192.168.100.201:1812 length 178
(3)   User-Name = "mpulis"
(3)   NAS-Identifier = "802aa849c3a3"
(3)   NAS-Port = 0
(3)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(3)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   EAP-Message = 0x02bd00061500
(3)   State = 0x104c8eb012f19be8aa68bc37dd34ca62
(3)   Message-Authenticator = 0xd8215c926890c9999a95385be24f1710
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 189 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x104c8eb012f19be8
(3) eap: Finished EAP session with state 0x104c8eb012f19be8
(3) eap: Previous EAP request found for state 0x104c8eb012f19be8, released
from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 190 length 1004
(3) eap: EAP session adding &reply:State = 0x104c8eb013f29be8
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Sent Access-Challenge Id 12 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(3)   EAP-Message =
0x01be03ec15c000000b2fb3d95dd2ed6bc14f8008ac4ccb42e7eb0200a8d70b9a3d9e451cf4e0f645302d933d25af330480c89609c676a8b21f5463d0d83293c3d96e1f52034ec62a147f95d27b9a6f34ab0a97a3b7a366601166a86c0409ece2b9ddc79831d2c39f79903774d273ae6afca66797b43da5
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x104c8eb013f29be8aa68bc37dd34ca62
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 13 from 192.168.100.110:52775 to
192.168.100.201:1812 length 178
(4)   User-Name = "mpulis"
(4)   NAS-Identifier = "802aa849c3a3"
(4)   NAS-Port = 0
(4)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(4)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   EAP-Message = 0x02be00061500
(4)   State = 0x104c8eb013f29be8aa68bc37dd34ca62
(4)   Message-Authenticator = 0x15d667f1ad7c6d5a1a586f2c8be1eb53
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 190 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x104c8eb013f29be8
(4) eap: Finished EAP session with state 0x104c8eb013f29be8
(4) eap: Previous EAP request found for state 0x104c8eb013f29be8, released
from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 191 length 885
(4) eap: EAP session adding &reply:State = 0x104c8eb014f39be8
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Sent Access-Challenge Id 13 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(4)   EAP-Message =
0x01bf0375158000000b2f13024d54310e300c06035504080c0552616261743112301006035504070c0954616c2d566972747531223020060355040a0c195468652041726368626973686f70732053656d696e6172792e3128302606092a864886f70d0109011619746563686e6963616c4073656d696e61
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x104c8eb014f39be8aa68bc37dd34ca62
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 14 from 192.168.100.110:52775 to
192.168.100.201:1812 length 312
(5)   User-Name = "mpulis"
(5)   NAS-Identifier = "802aa849c3a3"
(5)   NAS-Port = 0
(5)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(5)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Connect-Info = "CONNECT 0Mbps 802.11b"
(5)   EAP-Message =
0x02bf008c150016030100461000004241044ee56b6f046cd16b73ae61e224938e5bb3f38ecadac2fd7a2ea97c2de6ea60885cddc0684187a05ff85c680993523a0b6582479493337b6bace1e0e9fb4d3dce140301000101160301003071587e3731e84b9e00b808d0287db676e633baabd13d2afb5c6f2d
(5)   State = 0x104c8eb014f39be8aa68bc37dd34ca62
(5)   Message-Authenticator = 0x761590df4f7736aa3eba48c638fc867c
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 191 length 140
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x104c8eb014f39be8
(5) eap: Finished EAP session with state 0x104c8eb014f39be8
(5) eap: Previous EAP request found for state 0x104c8eb014f39be8, released
from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: [eaptls verify] = ok
(5) eap_ttls: Done initial handshake
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_ttls: TLS_accept: unknown state
(5) eap_ttls: TLS_accept: unknown state
(5) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls: TLS_accept: unknown state
(5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls: TLS_accept: unknown state
(5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls: TLS_accept: unknown state
(5) eap_ttls: TLS_accept: unknown state
(5) eap_ttls: (other): SSL negotiation finished successfully
(5) eap_ttls: SSL Connection Established
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 192 length 69
(5) eap: EAP session adding &reply:State = 0x104c8eb0158c9be8
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found.  Ignoring.
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Sent Access-Challenge Id 14 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(5)   EAP-Message =
0x01c0004515800000003b1403010001011603010030dc8e04fd7b6568f617df53ac0662a5c8936a3d8eeb99887cd9ce2751450d4ba3519d793bf500899329c30c5a1af6f30e
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x104c8eb0158c9be8aa68bc37dd34ca62
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 15 from 192.168.100.110:52775 to
192.168.100.201:1812 length 231
(6)   User-Name = "mpulis"
(6)   NAS-Identifier = "802aa849c3a3"
(6)   NAS-Port = 0
(6)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(6)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Connect-Info = "CONNECT 0Mbps 802.11b"
(6)   EAP-Message =
0x02c0003b15001703010030b1343fa3ee84e0aca07d87920e79429f9606b173a4399315dcf4bb44879b25742fd75d6f8d0a0a99541d81ea38f9e023
(6)   State = 0x104c8eb0158c9be8aa68bc37dd34ca62
(6)   Message-Authenticator = 0x0030d6f15d315e746b958bacf91de6ae
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 192 length 59
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x104c8eb0158c9be8
(6) eap: Finished EAP session with state 0x104c8eb0158c9be8
(6) eap: Previous EAP request found for state 0x104c8eb0158c9be8, released
from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: [eaptls verify] = ok
(6) eap_ttls: Done initial handshake
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message = 0x0200000b016d70756c6973
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Got tunneled identity of mpulis
(6) eap_ttls: Setting default EAP type for tunneled EAP session
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x0200000b016d70756c6973
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "mpulis"
(6) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 0 length 11
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_md5 to process data
(6) eap_md5: Issuing MD5 Challenge
(6) eap: Sending EAP Request (code 1) ID 1 length 22
(6) eap: EAP session adding &reply:State = 0x2dcb3c7c2dca38ab
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x010100160410ec9e80ce552a991bf262b68ca81ac72e
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x2dcb3c7c2dca38ab341ae2a70b5ec88b
(6) eap_ttls: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 193 length 79
(6) eap: EAP session adding &reply:State = 0x104c8eb0168d9be8
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found.  Ignoring.
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) Sent Access-Challenge Id 15 from 192.168.100.201:1812 to
192.168.100.110:52775 length 0
(6)   EAP-Message =
0x01c1004f15800000004517030100406f6bfe65010fa9323ed7a6bbf9b4fd844fee2e865ce18b5706d157564969ae8fe8e3cf28c01120e207316199b1b8516719a0b0e939c95a4d77462807695068b6
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x104c8eb0168d9be8aa68bc37dd34ca62
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 16 from 192.168.100.110:52775 to
192.168.100.201:1812 length 247
(7)   User-Name = "mpulis"
(7)   NAS-Identifier = "802aa849c3a3"
(7)   NAS-Port = 0
(7)   Called-Station-Id = "82-2A-A8-4B-C3-A3:SeminaryWiFi"
(7)   Calling-Station-Id = "B0-DF-3A-7C-23-5E"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Connect-Info = "CONNECT 0Mbps 802.11b"
(7)   EAP-Message =
0x02c1004b1500170301004048b4eadb4e11dc091be6b871f7dcd29603716d4ec6b87a22c7499a1d16ecdcce190db0546cb0912362038f87a6c9b3e3a971564e29ebb7f14bb4fb7df035f265
(7)   State = 0x104c8eb0168d9be8aa68bc37dd34ca62
(7)   Message-Authenticator = 0x4979edd89c7646dbb7c37729c121bd40
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 193 length 75
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x2dcb3c7c2dca38ab
(7) eap: Finished EAP session with state 0x104c8eb0168d9be8
(7) eap: Previous EAP request found for state 0x104c8eb0168d9be8, released
from the list
(7) eap: Peer sent packet with method EAP TTLS (21)
(7) eap: Calling submodule eap_ttls to process data
(7) eap_ttls: Authenticate
(7) eap_ttls: Continuing EAP-TLS
(7) eap_ttls: [eaptls verify] = ok
(7) eap_ttls: Done initial handshake
(7) eap_ttls: [eaptls process] = ok
(7) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(7) eap_ttls: Got tunneled request
(7) eap_ttls:   EAP-Message = 0x020100160410229a728db478439fed46421e54ea7160
(7) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_ttls: Sending tunneled request
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x020100160410229a728db478439fed46421e54ea7160
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "mpulis"
(7)   State = 0x2dcb3c7c2dca38ab341ae2a70b5ec88b
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "mpulis", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 1 length 22
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7)       [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(7) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap:    --> (cn=mpulis)
(7) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
filter "(cn=mpulis)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN
"cn=mpulis,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(7) ldap: Processing user attributes
(7) ldap: control:Password-With-Header +=
'{ssha}VlINJtlRL+9CuOK5itOeTIvRfwKRSNj9xllpiQ=='
rlm_ldap (ldap): Released connection (1)
(7)       [ldap] = updated
(7)       [expiration] = noop
(7)       [logintime] = noop
(7) pap: Converted: Password-With-Header -> SSHA1-Password
(7) pap: Removing &control:Password-With-Header
(7) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
bytes
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0x2dcb3c7c2dca38ab
(7) eap: Finished EAP session with state 0x2dcb3c7c2dca38ab
(7) eap: Previous EAP request found for state 0x2dcb3c7c2dca38ab, released
from the list
(7) eap: Peer sent packet with method EAP MD5 (4)
(7) eap: Calling submodule eap_md5 to process data
(7) eap_md5: Cleartext-Password is required for EAP-MD5 authentication
(7) eap: ERROR: Failed continuing EAP MD5 (4) session.  EAP sub-module
failed
(7) eap: Sending EAP Failure (code 4) ID 1 length 4
(7) eap: Failed in EAP select
(7)       [eap] = invalid
(7)     } # authenticate = invalid
(7)   Failed to authenticate the user
(7)   Using Post-Auth-Type Reject
(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7)     Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> mpulis
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)       [attr_filter.access_reject] = updated
(7)       update outer.session-state {
(7)         &Module-Failure-Message := &request:Module-Failure-Message ->
'eap: Failed continuing EAP MD5 (4) session.  EAP sub-module failed'
(7)       } # update outer.session-state = noop
(7)     } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message = 0x04010004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_ttls: Got tunneled Access-Reject
(7) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module
failed
(7) eap: Sending EAP Failure (code 4) ID 193 length 4
(7) eap: Failed in EAP select
(7)     [eap] = invalid
(7)   } # authenticate = invalid
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> mpulis
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)     [attr_filter.access_reject] = updated
(7)     [eap] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)   } # Post-Auth-Type REJECT = updated
(7) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(7) Sending delayed response
(7) Sent Access-Reject Id 16 from 192.168.100.201:1812 to
192.168.100.110:52775 length 44
(7)   EAP-Message = 0x04c10004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 9 with timestamp +10
(1) Cleaning up request packet ID 10 with timestamp +10
(2) Cleaning up request packet ID 11 with timestamp +10
(3) Cleaning up request packet ID 12 with timestamp +10
(4) Cleaning up request packet ID 13 with timestamp +10
(5) Cleaning up request packet ID 14 with timestamp +10
(6) Cleaning up request packet ID 15 with timestamp +10
(7) Cleaning up request packet ID 16 with timestamp +10
Ready to process requests



Matthew Pulis
web:   www.matthewpulis.info
mob:   +356 79539404


------------------------------

Subject: Digest Footer

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

------------------------------

End of Freeradius-Users Digest, Vol 137, Issue 5
************************************************
University of Huddersfield inspiring tomorrow's professionals.
[http://marketing.hud.ac.uk/_HOSTED/EmailSig2014/EmailSigFooter.jpg]

This transmission is confidential and may be legally privileged. If you receive it in error, please notify us immediately by e-mail and remove it from your system. If the content of this e-mail does not relate to the business of the University of Huddersfield, then we do not endorse it and will accept no liability.



More information about the Freeradius-Users mailing list