Install Freeradius in Centos7 with Perl support

[Dávid Erős]

Hi Florian,

Can you see those modules "rlm_perl, rlm_python" in "mods-available"?

Regards,
David

2017-04-12 20:07 GMT+02:00 Fabian Borot <fborot at hotmail.com>:

> thank you David, I just installed that and I think that it seems OK now :
>
> this is the output of the configure command grepping for python and perl
>
>
>   checking for perl... /bin/perl
> === configuring in src/modules/rlm_perl (/usr/src/freeradius-server-3.
> 0.13/src/modules/rlm_perl)
> checking whether perl executable path has been provided... no
> checking for perl... /bin/perl
> configure: ExtUtil's ccopts were " -D_REENTRANT -D_GNU_SOURCE
> -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64  -I/usr/lib64/perl5/CORE "
> configure: Sanitized ccopts are "-D_REENTRANT -D_GNU_SOURCE
> -fno-strict-aliasing -pipe -fstack-protector -isystem /usr/local/include
> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -isystem /usr/lib64/perl5/CORE"
> configure: ExtUtil's ldopts were "-Wl,--enable-new-dtags
> -Wl,-rpath,/usr/lib64/perl5/CORE  -fstack-protector
> -L/usr/lib64/perl5/CORE -lperl -lresolv -lnsl -ldl -lm -lcrypt -lutil
> -lpthread -lc"
> configure: Sanitized ldopts are "-Wl,--enable-new-dtags
> -Wl,-rpath,/usr/lib64/perl5/CORE -fstack-protector
> -L/usr/lib64/perl5/CORE -lperl -lresolv -lnsl -ldl -lm -lcrypt -lutil
> -lpthread -lc"
> checking for perl.h... yes
> === configuring in src/modules/rlm_python (/usr/src/freeradius-server-3.
> 0.13/src/modules/rlm_python)
> checking for python2.7... python2.7
> checking for Python.h in /usr/include/python2.7/... yes
> checking for Py_Initialize in -lpython2.7 in /usr/lib/python2.7/config...
> yes
>
>
>  also when I search for rlm_perl and rlm_python I see these files inside
> the build folder
>
> [root at cg-mia-afapi freeradius-server-3.0.13]# find / -name rlm_perl
> /usr/src/freeradius-server-3.0.13/src/modules/rlm_perl
> /usr/src/freeradius-server-3.0.13/build/make/src/src/modules/rlm_perl
> /usr/src/freeradius-server-3.0.13/build/objs/src/modules/rlm_perl
>
>
> [root at cg-mia-afapi freeradius-server-3.0.13]# find / -name rlm_python
> /usr/local/share/doc/freeradius/modules/rlm_python
> /usr/src/freeradius-server-3.0.13/doc/modules/rlm_python
> /usr/src/freeradius-server-3.0.13/src/modules/rlm_python
> /usr/src/freeradius-server-3.0.13/build/make/src/src/modules/rlm_python
> /usr/src/freeradius-server-3.0.13/build/objs/src/modules/rlm_python
>
> I also see them in
>
> [root at cg-mia-afapi freeradius-server-3.0.13]# ls -la
> /usr/lib64/freeradius/rlm_perl.so
> -rwxr-xr-x. 1 root root 31904 Jan 17 18:50 /usr/lib64/freeradius/rlm_
> perl.so
> [root at cg-mia-afapi freeradius-server-3.0.13]# ls -la
> /usr/lib64/freeradius/rlm_python.so
> -rwxr-xr-x. 1 root root 24928 Jan 17 18:50 /usr/lib64/freeradius/rlm_
> python.so
> [root at cg-mia-afapi freeradius-server-3.0.13]#
>
>
> however when I run  /usr/sbin/radiusd -X > /var/log/fb4.txt and look for
> perl and or python in that file I dont see any reference to them.
>
> could it be that the 2 modules are installed now BUT by default those 2
> modules need to be activated manually ? I see also that only loads modules
> from the ones inside "/etc/raddb/mods-enabled/" and I guess the loaded ones
> needed to be "added" by making a link from "/etc/raddb/mods-available/" ,
> is that a valid statement  ?
>
> thank you in advance
> fborot
>
>
> From: Fabian Borot <fborot at hotmail.com>
> Sent: Wednesday, April 12, 2017 11:55 AM
> To: freeradius-users at lists.freeradius.org
> Subject: Install Freeradius in Centos7 with Perl support
>
>
>
> Hi I installed freeradius-server-3.0.13  on centos7 from
>
> http://networkradius.com/doc/FreeRADIUS%20Technical%20Guide.pdf
>
>
>
> THE FREERADIUS TECHNICAL GUIDE HAPTER NTRODUCTION WHAT ...
> networkradius.com
> Copyright (C) 2014 Network RADIUS SARL 1 of 58 THE FREERADIUS TECHNICAL
> GUIDE CHAPTER 1 - INTRODUCTION WHAT IS FREERADIUS? Chapter 1 - Introduction
>
>
>
>
> THE FREERADIUS TECHNICAL GUIDE HAPTER NTRODUCTION WHAT ...
> networkradius.com
> Copyright (C) 2014 Network RADIUS SARL 1 of 58 THE FREERADIUS TECHNICAL
> GUIDE CHAPTER 1 - INTRODUCTION WHAT IS FREERADIUS? Chapter 1 - Introduction
>
>
> I proceedd with the regular, configure, make, make install steps but I saw
> a lot of warnings about messing dependencies and as I was noticing them I
> added them  to a yum install list, see below
>
> yum install net-snmp net-snmp-utils libtalloc-devel unixODBC-devel
> unixODBC openssl openssl-devel perl-ExtUtils-CBuilder
> perl-ExtUtils-MakeMaker wireshark mysql-devel libmemcached
> libmemcached-devel libpcap-devel perl-devel python-devel freeradius-perl
> freeradius-python   freeradius-unixODBC -y
>
> but I still cant get the perl module as shown below when doing the config
> part
>
>
> === configuring in src/modules/rlm_perl (/usr/src/freeradius-server-3.
> 0.13/src/modules/rlm_perl)
> checking whether perl executable path has been provided... no
> checking for perl... /bin/perl
> Can't locate ExtUtils/Embed.pm in @INC (@INC contains:
> /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl
> /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .).
> BEGIN failed--compilation aborted.
> Can't locate ExtUtils/Embed.pm in @INC (@INC contains:
> /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl
> /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .).
> BEGIN failed--compilation aborted.
> checking for perl.h... no
> checking for perl.h in /usr/local/include/... no
> checking for perl.h in /opt/include/... no
> configure: WARNING: silently not building rlm_perl.
> configure: WARNING: FAILURE: rlm_perl requires:  EXTERN.h EXTERN.h
> libperl.so libperl.so.
>
>
>
> please advise... thank you
> fborot
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html
>