new freeradius setup

Andrew Meyer andrewm659 at yahoo.com
Wed Oct 25 05:01:01 CEST 2017



So I also added a client config and told it to allow my network to have the ability to communicate w/ FreeRADIUS.  

Tue Oct 24 21:17:58 2017 : Auth: (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client ASM port 0)
Tue Oct 24 21:18:04 2017 : Auth: (1) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [bob/hello] (from client ASM port 0)

There is something i'm missing.   I feel like it needs to be in the /etc/raddb/users file.  Like a default config statement.





On Tuesday, October 24, 2017, 8:27:47 PM CDT, Andrew Meyer via Freeradius-Users <freeradius-users at lists.freeradius.org> wrote: 





Ok, I did what you said, I started fresh.
The only thing I have put in the /etc/raddb/radiusd.conf is a listen directive.  So now in the logs i'm getting this:
Tue Oct 24 20:26:54 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udpTue Oct 24 20:26:59 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udpTue Oct 24 20:27:04 2017 : Error: Ignoring request to auth address 10.150.10.40 port 1812 from unknown client 10.150.10.40 port 35086 proto udp

    On Tuesday, October 24, 2017, 7:51:45 PM CDT, Alan DeKok <aland at deployingradius.com> wrote:  


> On Oct 24, 2017, at 8:36 PM, Andrew Meyer via Freeradius-Users <freeradius-users at lists.freeradius.org> wrote:
> 
> I am running CentOS 7.  I am setting up FreeRADIUS again.  Documenting it step-by-step. I am only working the test user at the moment but I am getting the following error:

  Please post straight text.  Your mailer is mangling the text you're posing to the list.

  But the main thing is:

>  : Debug: (0) Empty authorize section.  Using default return values.

  You've edited the default configuration and broken it.  Don't do that.

  Start from the default configuration.  It works.  Then, make small changes.  Test them before making more changes.

> Here is my config from /etc/raddb/users:bob    Auth-Type := Accept        Cleartext-Password := "hello"        Reply-Message := "Hello, %{User-Name}"

  Don't set "Auth-Type := Accept".  It's wrong, and won't do what you want.

> Is there something I missed in the configuration?

  The default configuration got completely destroyed.  This makes the server not work.

  Use the default configuration.  It works.

  Alan DeKok.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html



More information about the Freeradius-Users mailing list