Freeradius3 Empty authorize section

[Agnel Varghese]

Didn't edit configuration file.
Running it on different port : radiusd -i 192.168.122.1 -p 1712 -X

Below is the output "radiusd -X"

(8) Received Access-Request Id 6 from 192.168.122.100:16607 to
192.168.122.1:1745 length 232
(8)   Cisco-AVPair = "client-mac-address=0050.9400.0005"
(8)   Acct-Session-Id = "04000003"
(8)   NAS-Port-Id = "0/0/4/1"
(8)   Cisco-NAS-Port = "0/0/4/1"
(8)   User-Name = "agnel"
(8)   Service-Type = Framed-User
(8)   CHAP-Password = 0x77c7575aa27bc6883290278e69588b5807
(8)   CHAP-Challenge = 0xd7b99716f3620676b894dbf4d3203ae7
(8)   X-Ascend-Connect-Progress = LCP-Opened
(8)   Cisco-AVPair = "connect-progress=LCP Open"
(8)   Framed-Protocol = PPP
(8)   NAS-Port-Type = PPPoEoVLAN
(8)   Event-Timestamp = "Aug  2 2018 16:43:27 IST"
(8)   NAS-Identifier = "vBNG"
(8)   NAS-IP-Address = 192.168.122.100
(8)   NAS-IPv6-Address = ::
(8) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) Post-Auth-Type sub-section not found.  Ignoring.
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 6 from 192.168.122.1:1745 to 192.168.122.100:16607
length 20
Waking up in 3.9 seconds.
(8) Cleaning up request packet ID 6 with timestamp +76
Ready to process requests



On 27 July 2018 at 17:20, Alan DeKok <aland at deployingradius.com> wrote:

> On Jul 27, 2018, at 3:45 AM, Agnel Varghese <agn82kv at gmail.com> wrote:
> >
> > Hi all,
> >
> > Using FreeRADIUS Version 3.0.17.
> > If non default ports are used (1712 below) getting Access-Reject with
> below
> > error.
> > Same works for 1812 port
> >
> > Debugs failed case
>
>   Read http://wiki.freeradius.org/list-help
>
>   We need "radiusd -X".  Not "radiusd -XXxxxxxxx".
>
>   And if the authorize section is empty, it's because you edited the
> configuration file and broke it.  Don't do that.
>
>   Please describe what you did.  If you just edited the config and changed
> "1812" to "1712", then it *will not* cause this error.
>
>   You did something else.  What was it?
>
>   And if you're going to ask questions, ask *good* questions.  It's ever
> so much more useful than asking "I did stuff and it didn't work".
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html