Cut domain from username

Алексей Морозенко alexmorozenko at gmail.com
Mon Aug 13 21:25:25 CEST 2018


But I see that some components (like inner-tunnel) use User-Name, not
Stripped-User-Name:

FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/ldap02
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/ldap01
including configuration file /etc/freeradius/mods-enabled/ldap03
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/echo
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/abfab-tr
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client WiFi-Mgmt-Net {
        ipaddr = 10.0.18.0/24
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
        default_eap_type = "mschapv2"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_ldap
  # Loading module "ldap02" from file /etc/freeradius/mods-enabled/ldap02
  ldap ldap02 {
        server = "10.132.0.32"
        identity = "uid=svc-radius,cn=users,cn=accounts,dc=office,dc=lan"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=ipausergroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        membership_filter =
"(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "cn=users,cn=accounts,dc=office,dc=lan"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute ldap02-LDAP-Group
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/etc/freeradius/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loading module "sradutmp" from file
/etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loading module "ldap01" from file /etc/freeradius/mods-enabled/ldap01
  ldap ldap01 {
        server = "10.132.0.33"
        identity = "uid=svc-radius,cn=users,cn=accounts,dc=office,dc=lan"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=ipausergroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        membership_filter =
"(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "cn=users,cn=accounts,dc=office,dc=lan"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute ldap01-LDAP-Group
  # Loading module "ldap03" from file /etc/freeradius/mods-enabled/ldap03
  ldap ldap03 {
        server = "10.132.0.39"
        identity = "uid=svc-radius,cn=users,cn=accounts,dc=office,dc=lan"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=ipausergroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        membership_filter =
"(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "cn=users,cn=accounts,dc=office,dc=lan"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute ldap03-LDAP-Group
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
        filename = "/etc/freeradius/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
        key = "%{%{Stripped-User-Name}:-%{User-Name}}"
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  instantiate {
  }
  # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "detail" from file
/etc/freeradius/mods-enabled/detail
  # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
        ca_file = "/etc/ssl/certs/ca-certificates.crt"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
        tls_max_version = ""
        tls_min_version = "1.0"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "reject" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "ldap02" from file
/etc/freeradius/mods-enabled/ldap02
rlm_ldap: libldap vendor: OpenLDAP, version: 20445
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap02): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap02): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap02): Connecting to ldap://10.132.0.32:389
rlm_ldap (ldap02): Waiting for bind result...
rlm_ldap (ldap02): Bind successful
rlm_ldap (ldap02): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap02): Connecting to ldap://10.132.0.32:389
rlm_ldap (ldap02): Waiting for bind result...
rlm_ldap (ldap02): Bind successful
rlm_ldap (ldap02): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap02): Connecting to ldap://10.132.0.32:389
rlm_ldap (ldap02): Waiting for bind result...
rlm_ldap (ldap02): Bind successful
rlm_ldap (ldap02): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap02): Connecting to ldap://10.132.0.32:389
rlm_ldap (ldap02): Waiting for bind result...
rlm_ldap (ldap02): Bind successful
rlm_ldap (ldap02): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap02): Connecting to ldap://10.132.0.32:389
rlm_ldap (ldap02): Waiting for bind result...
rlm_ldap (ldap02): Bind successful
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"   found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"      found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "ldap01" from file
/etc/freeradius/mods-enabled/ldap01
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap01): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap01): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap01): Connecting to ldap://10.132.0.33:389
rlm_ldap (ldap01): Waiting for bind result...
rlm_ldap (ldap01): Bind successful
rlm_ldap (ldap01): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap01): Connecting to ldap://10.132.0.33:389
rlm_ldap (ldap01): Waiting for bind result...
rlm_ldap (ldap01): Bind successful
rlm_ldap (ldap01): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap01): Connecting to ldap://10.132.0.33:389
rlm_ldap (ldap01): Waiting for bind result...
rlm_ldap (ldap01): Bind successful
rlm_ldap (ldap01): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap01): Connecting to ldap://10.132.0.33:389
rlm_ldap (ldap01): Waiting for bind result...
rlm_ldap (ldap01): Bind successful
rlm_ldap (ldap01): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap01): Connecting to ldap://10.132.0.33:389
rlm_ldap (ldap01): Waiting for bind result...
rlm_ldap (ldap01): Bind successful
  # Instantiating module "ldap03" from file
/etc/freeradius/mods-enabled/ldap03
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap03): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap03): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap03): Connecting to ldap://10.132.0.39:389
rlm_ldap (ldap03): Waiting for bind result...
rlm_ldap (ldap03): Bind successful
rlm_ldap (ldap03): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap03): Connecting to ldap://10.132.0.39:389
rlm_ldap (ldap03): Waiting for bind result...
rlm_ldap (ldap03): Bind successful
rlm_ldap (ldap03): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap03): Connecting to ldap://10.132.0.39:389
rlm_ldap (ldap03): Waiting for bind result...
rlm_ldap (ldap03): Bind successful
rlm_ldap (ldap03): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap03): Connecting to ldap://10.132.0.39:389
rlm_ldap (ldap03): Waiting for bind result...
rlm_ldap (ldap03): Bind successful
rlm_ldap (ldap03): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap03): Connecting to ldap://10.132.0.39:389
rlm_ldap (ldap03): Waiting for bind result...
rlm_ldap (ldap03): Bind successful
  # Instantiating module "mschap" from file
/etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "files" from file
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "IPASS" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:351
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 45490
Listening on proxy address :: port 47971
Ready to process requests

(0) Received Access-Request Id 207 from 10.0.18.3:59080 to 10.132.0.55:1812
length 216
(0)   User-Name = "alex at domain.com"
(0)   NAS-IP-Address = 10.0.18.3
(0)   NAS-Port = 0
(0)   NAS-Identifier = "10.0.18.3"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Calling-Station-Id = "e0c7679158e8"
(0)   Called-Station-Id = "808db7c99bb4"
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1100
(0)   EAP-Message = 0x02010017017376632d61736d406e696d7365732e636f6d
(0)   Aruba-Essid-Name = "test789"
(0)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(0)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(0)   Message-Authenticator = 0xe6368610427513d7d3c8386bb08e9de2
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(0)     EXPAND %{request:User-Name}
(0)        --> alex at domain.com
(0)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(0)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(0)       update request {
(0)         EXPAND %{1}
(0)            --> alex
(0)         Stripped-User-Name := alex
(0)         EXPAND %{2}
(0)            -->
(0)         Realm :=
(0)       } # update request = noop
(0)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Request already has destination realm set.  Ignoring
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 23
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_mschapv2 to process data
(0) eap_mschapv2: Issuing Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 43
(0) eap: EAP session adding &reply:State = 0x0088f5b1008aefcf
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 207 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(0)   EAP-Message =
0x0102002b1a010200261004f03b7214432fa4908e1ae6add58a35667265657261646975732d332e302e3136
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x0088f5b1008aefcfe8cdb7ca90a2df68
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 208 from 10.0.18.3:59080 to 10.132.0.55:1812
length 219
(1)   User-Name = "alex at domain.com"
(1)   NAS-IP-Address = 10.0.18.3
(1)   NAS-Port = 0
(1)   NAS-Identifier = "10.0.18.3"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Calling-Station-Id = "e0c7679158e8"
(1)   Called-Station-Id = "808db7c99bb4"
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1100
(1)   EAP-Message = 0x020200080319152b
(1)   State = 0x0088f5b1008aefcfe8cdb7ca90a2df68
(1)   Aruba-Essid-Name = "test789"
(1)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(1)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(1)   Message-Authenticator = 0x69ff3335a629ec10a544795776f95af5
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(1)     EXPAND %{request:User-Name}
(1)        --> alex at domain.com
(1)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(1)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(1)       update request {
(1)         EXPAND %{1}
(1)            --> alex
(1)         Stripped-User-Name := alex
(1)         EXPAND %{2}
(1)            -->
(1)         Realm :=
(1)       } # update request = noop
(1)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Request already has destination realm set.  Ignoring
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(1) files:    --> alex
(1)     [files] = noop
(1)     redundant-load-balance group {
rlm_ldap (ldap03): Reserved connection (0)
(1) ldap03: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap03:    --> (uid=alex)
(1) ldap03: Performing search in "cn=users,cn=accounts,dc=office,dc=lan"
with filter "(uid=alex)", scope "sub"
(1) ldap03: Waiting for search result...
(1) ldap03: User object found at DN
"uid=alex,cn=users,cn=accounts,dc=office,dc=lan"
(1) ldap03: Processing user attributes
(1) ldap03: control:NT-Password := 0x18470fb243f112bf6a64b735985260d2
rlm_ldap (ldap03): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap03): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap03): Connecting to ldap://10.132.0.39:389
rlm_ldap (ldap03): Waiting for bind result...
rlm_ldap (ldap03): Bind successful
(1)       [ldap03] = updated
(1)     } # redundant-load-balance group = updated
(1)     if ((ok || updated) && User-Password) {
(1)     if ((ok || updated) && User-Password)  -> FALSE
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x0088f5b1008aefcf
(1) eap: Finished EAP session with state 0x0088f5b1008aefcf
(1) eap: Previous EAP request found for state 0x0088f5b1008aefcf, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x0088f5b1018beccf
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 208 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(1)   EAP-Message = 0x010300061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x0088f5b1018beccfe8cdb7ca90a2df68
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 209 from 10.0.18.3:59080 to 10.132.0.55:1812
length 372
(2)   User-Name = "alex at domain.com"
(2)   NAS-IP-Address = 10.0.18.3
(2)   NAS-Port = 0
(2)   NAS-Identifier = "10.0.18.3"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Calling-Station-Id = "e0c7679158e8"
(2)   Called-Station-Id = "808db7c99bb4"
(2)   Service-Type = Framed-User
(2)   Framed-MTU = 1100
(2)   EAP-Message =
0x020300a119800000009716030100920100008e03035b71b22e7ea2275bc25b7e26285c2916f71e897c2d793cd4a74e12c29a2cbe6300002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00
(2)   State = 0x0088f5b1018beccfe8cdb7ca90a2df68
(2)   Aruba-Essid-Name = "test789"
(2)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(2)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(2)   Message-Authenticator = 0x3a8f545a78b3f480f5a22a523a27fddb
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(2)     EXPAND %{request:User-Name}
(2)        --> alex at domain.com
(2)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(2)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(2)       update request {
(2)         EXPAND %{1}
(2)            --> alex
(2)         Stripped-User-Name := alex
(2)         EXPAND %{2}
(2)            -->
(2)         Realm :=
(2)       } # update request = noop
(2)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Request already has destination realm set.  Ignoring
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 161
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x0088f5b1018beccf
(2) eap: Finished EAP session with state 0x0088f5b1018beccf
(2) eap: Previous EAP request found for state 0x0088f5b1018beccf, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 151 bytes
(2) eap_peap: Got complete TLS record (151 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv TLS 1.2  [length 0092]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2  [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2  [length 032a]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2  [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2  [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x0088f5b1028ceccf
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 209 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(2)   EAP-Message =
0x010403ec19c0000004cc160303003d020000390303fc4caa8efce8bff5c2c9100ef59ffe4defd8ccc495fb196ac2c9e90dc0b31d7e00c030000011ff01000100000b00040300010200170000160303032a0b0003260003230003203082031c30820204a0030201020209009469d7986e3c6613300d0609
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x0088f5b1028ceccfe8cdb7ca90a2df68
(2) Finished request
Waking up in 4.8 seconds.
(3) Received Access-Request Id 210 from 10.0.18.3:59080 to 10.132.0.55:1812
length 217
(3)   User-Name = "alex at domain.com"
(3)   NAS-IP-Address = 10.0.18.3
(3)   NAS-Port = 0
(3)   NAS-Identifier = "10.0.18.3"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Calling-Station-Id = "e0c7679158e8"
(3)   Called-Station-Id = "808db7c99bb4"
(3)   Service-Type = Framed-User
(3)   Framed-MTU = 1100
(3)   EAP-Message = 0x020400061900
(3)   State = 0x0088f5b1028ceccfe8cdb7ca90a2df68
(3)   Aruba-Essid-Name = "test789"
(3)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(3)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(3)   Message-Authenticator = 0x8d55d56570b64b9fc79955b20ac41fd1
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(3)     EXPAND %{request:User-Name}
(3)        --> alex at domain.com
(3)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(3)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(3)       update request {
(3)         EXPAND %{1}
(3)            --> alex
(3)         Stripped-User-Name := alex
(3)         EXPAND %{2}
(3)            -->
(3)         Realm :=
(3)       } # update request = noop
(3)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Request already has destination realm set.  Ignoring
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x0088f5b1028ceccf
(3) eap: Finished EAP session with state 0x0088f5b1028ceccf
(3) eap: Previous EAP request found for state 0x0088f5b1028ceccf, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 240
(3) eap: EAP session adding &reply:State = 0x0088f5b1038deccf
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 210 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(3)   EAP-Message =
0x010500f0190035dff5aab70d154be4f7112909f03ee856abfb24e3dbc93799e4f7116baab548f0a00546fcaae4e5230b819e30fc518dcd7d4ac99c3bf0f3741a3353cf5d396a2521494708fc843fff458d14f7d4b912a07eea730d337e194a162a79676f580ffea17bb3d811bb10faeadd1a713e7fc805
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x0088f5b1038deccfe8cdb7ca90a2df68
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 211 from 10.0.18.3:59080 to 10.132.0.55:1812
length 347
(4)   User-Name = "alex at domain.com"
(4)   NAS-IP-Address = 10.0.18.3
(4)   NAS-Port = 0
(4)   NAS-Identifier = "10.0.18.3"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Calling-Station-Id = "e0c7679158e8"
(4)   Called-Station-Id = "808db7c99bb4"
(4)   Service-Type = Framed-User
(4)   Framed-MTU = 1100
(4)   EAP-Message =
0x0205008819800000007e16030300461000004241041fb2f64c2e4a52d76b888c2a04241d1704be41f61df8878d068342bacfa8724c13f690f48708c58da237451be18741cfed71a7b3de5b33102827af1d132f123e1403030001011603030028130b887a0ccd01e13dbcf479e2f7bd254585bb7378514e
(4)   State = 0x0088f5b1038deccfe8cdb7ca90a2df68
(4)   Aruba-Essid-Name = "test789"
(4)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(4)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(4)   Message-Authenticator = 0x6f7b399e07e32ea51536689cfeb289a7
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(4)     EXPAND %{request:User-Name}
(4)        --> alex at domain.com
(4)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(4)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(4)       update request {
(4)         EXPAND %{1}
(4)            --> alex
(4)         Stripped-User-Name := alex
(4)         EXPAND %{2}
(4)            -->
(4)         Realm :=
(4)       } # update request = noop
(4)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Request already has destination realm set.  Ignoring
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x0088f5b1038deccf
(4) eap: Finished EAP session with state 0x0088f5b1038deccf
(4) eap: Previous EAP request found for state 0x0088f5b1038deccf, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2  [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2  [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2  [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2  [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 57
(4) eap: EAP session adding &reply:State = 0x0088f5b1048eeccf
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 211 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(4)   EAP-Message =
0x0106003919001403030001011603030028c73431954e9b5324e83f8bf8c1d33d87e1d0c8dc655edcded4801ea36ee5adab9d4d668f6918a0c1
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x0088f5b1048eeccfe8cdb7ca90a2df68
(4) Finished request
Waking up in 4.7 seconds.
(5) Received Access-Request Id 212 from 10.0.18.3:59080 to 10.132.0.55:1812
length 217
(5)   User-Name = "alex at domain.com"
(5)   NAS-IP-Address = 10.0.18.3
(5)   NAS-Port = 0
(5)   NAS-Identifier = "10.0.18.3"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Calling-Station-Id = "e0c7679158e8"
(5)   Called-Station-Id = "808db7c99bb4"
(5)   Service-Type = Framed-User
(5)   Framed-MTU = 1100
(5)   EAP-Message = 0x020600061900
(5)   State = 0x0088f5b1048eeccfe8cdb7ca90a2df68
(5)   Aruba-Essid-Name = "test789"
(5)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(5)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(5)   Message-Authenticator = 0x9a24f76e4c642a42911e648d1093377e
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(5)     EXPAND %{request:User-Name}
(5)        --> alex at domain.com
(5)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(5)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(5)       update request {
(5)         EXPAND %{1}
(5)            --> alex
(5)         Stripped-User-Name := alex
(5)         EXPAND %{2}
(5)            -->
(5)         Realm :=
(5)       } # update request = noop
(5)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Request already has destination realm set.  Ignoring
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x0088f5b1048eeccf
(5) eap: Finished EAP session with state 0x0088f5b1048eeccf
(5) eap: Previous EAP request found for state 0x0088f5b1048eeccf, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established.  Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 7 length 40
(5) eap: EAP session adding &reply:State = 0x0088f5b1058feccf
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 212 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(5)   EAP-Message =
0x010700281900170303001dc73431954e9b532526aabb1eb9448dcc6af7cec29f0f487aa20d92b627
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x0088f5b1058feccfe8cdb7ca90a2df68
(5) Finished request
Waking up in 4.6 seconds.
(6) Received Access-Request Id 213 from 10.0.18.3:59080 to 10.132.0.55:1812
length 265
(6)   User-Name = "alex at domain.com"
(6)   NAS-IP-Address = 10.0.18.3
(6)   NAS-Port = 0
(6)   NAS-Identifier = "10.0.18.3"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Calling-Station-Id = "e0c7679158e8"
(6)   Called-Station-Id = "808db7c99bb4"
(6)   Service-Type = Framed-User
(6)   Framed-MTU = 1100
(6)   EAP-Message =
0x020700361900170303002b130b887a0ccd01e2a8d40c6629ea4fa379b438aff0d3e38d2ab7372326c3cfb75f466397e5e5bf11881196
(6)   State = 0x0088f5b1058feccfe8cdb7ca90a2df68
(6)   Aruba-Essid-Name = "test789"
(6)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(6)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(6)   Message-Authenticator = 0x6b8c545072c7557cc788bfdf74f5b1d6
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(6)     EXPAND %{request:User-Name}
(6)        --> alex at domain.com
(6)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(6)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(6)       update request {
(6)         EXPAND %{1}
(6)            --> alex
(6)         Stripped-User-Name := alex
(6)         EXPAND %{2}
(6)            -->
(6)         Realm :=
(6)       } # update request = noop
(6)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Request already has destination realm set.  Ignoring
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 54
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x0088f5b1058feccf
(6) eap: Finished EAP session with state 0x0088f5b1058feccf
(6) eap: Previous EAP request found for state 0x0088f5b1058feccf, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - alex at domain.com
(6) eap_peap: Got inner identity 'alex at domain.com'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap:   EAP-Message =
0x02070017017376632d61736d406e696d7365732e636f6d
(6) eap_peap: Setting User-Name to alex at domain.com
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap:   EAP-Message =
0x02070017017376632d61736d406e696d7365732e636f6d
(6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap:   User-Name = "alex at domain.com"
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x02070017017376632d61736d406e696d7365732e636f6d
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "alex at domain.com"
(6) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
 -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "domain.com" for User-Name = "alex at domain.com"
(6) suffix: No such realm "domain.com"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 23
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 43
(6) eap: EAP session adding &reply:State = 0x3b55f93d3b5de34e
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message =
0x0108002b1a0108002610ec3224f98d5c6055fdc0c0c9e0e572da667265657261646975732d332e302e3136
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x3b55f93d3b5de34e15503521e3555f5a
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap:   EAP-Message =
0x0108002b1a0108002610ec3224f98d5c6055fdc0c0c9e0e572da667265657261646975732d332e302e3136
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0x3b55f93d3b5de34e15503521e3555f5a
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap:   EAP-Message =
0x0108002b1a0108002610ec3224f98d5c6055fdc0c0c9e0e572da667265657261646975732d332e302e3136
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0x3b55f93d3b5de34e15503521e3555f5a
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 74
(6) eap: EAP session adding &reply:State = 0x0088f5b10680eccf
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 213 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(6)   EAP-Message =
0x0108004a1900170303003fc73431954e9b532679ce2a57e7eba470b1ffb3090d303e7080b6cb71e38f588c7f2f870dee4fdbf57c94b194fe272cfe27e9012e13add7aaf787302d75da83
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x0088f5b10680eccfe8cdb7ca90a2df68
(6) Finished request
Waking up in 4.6 seconds.
(7) Received Access-Request Id 214 from 10.0.18.3:59080 to 10.132.0.55:1812
length 319
(7)   User-Name = "alex at domain.com"
(7)   NAS-IP-Address = 10.0.18.3
(7)   NAS-Port = 0
(7)   NAS-Identifier = "10.0.18.3"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Calling-Station-Id = "e0c7679158e8"
(7)   Called-Station-Id = "808db7c99bb4"
(7)   Service-Type = Framed-User
(7)   Framed-MTU = 1100
(7)   EAP-Message =
0x0208006c19001703030061130b887a0ccd01e3ebec2ebcdf66353c13919dbba6c9be29edba245be70679d6cc694706f11c32c9c66612ae6b61be7c37ca276034ac34e9c70174144b8e920626d5f2eae08b9dcb4b818f57ae5baa7b6f41df28580d17f1033a7db87df2098567
(7)   State = 0x0088f5b10680eccfe8cdb7ca90a2df68
(7)   Aruba-Essid-Name = "test789"
(7)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(7)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(7)   Message-Authenticator = 0x7c036cd2a4976d426fc78a6b6f81df8d
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(7)     EXPAND %{request:User-Name}
(7)        --> alex at domain.com
(7)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(7)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(7)       update request {
(7)         EXPAND %{1}
(7)            --> alex
(7)         Stripped-User-Name := alex
(7)         EXPAND %{2}
(7)            -->
(7)         Realm :=
(7)       } # update request = noop
(7)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Request already has destination realm set.  Ignoring
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 108
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x3b55f93d3b5de34e
(7) eap: Finished EAP session with state 0x0088f5b10680eccf
(7) eap: Previous EAP request found for state 0x0088f5b10680eccf, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message =
0x0208004d1a0208004831f70ef8e82311611174848cbc45793a25000000000000000044e0ed89099438fb4e24ebfc3d220fc0445b1bb835acea18007376632d61736d406e696d7365732e636f6d
(7) eap_peap: Setting User-Name to alex at domain.com
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message =
0x0208004d1a0208004831f70ef8e82311611174848cbc45793a25000000000000000044e0ed89099438fb4e24ebfc3d220fc0445b1bb835acea18007376632d61736d406e696d7365732e636f6d
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "alex at domain.com"
(7) eap_peap:   State = 0x3b55f93d3b5de34e15503521e3555f5a
(7) Virtual server inner-tunnel received request
(7)   EAP-Message =
0x0208004d1a0208004831f70ef8e82311611174848cbc45793a25000000000000000044e0ed89099438fb4e24ebfc3d220fc0445b1bb835acea18007376632d61736d406e696d7365732e636f6d
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "alex at domain.com"
(7)   State = 0x3b55f93d3b5de34e15503521e3555f5a
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
 -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "domain.com" for User-Name = "alex at domain.com"
(7) suffix: No such realm "domain.com"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 77
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(7) files:    --> alex at domain.com
(7)       [files] = noop
(7)       redundant-load-balance group {
rlm_ldap (ldap02): Reserved connection (0)
(7) ldap02: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap02:    --> (uid=alex at domain.com)
(7) ldap02: Performing search in "cn=users,cn=accounts,dc=office,dc=lan"
with filter "(uid=alex at domain.com)", scope "sub"
(7) ldap02: Waiting for search result...
(7) ldap02: Search returned no results
rlm_ldap (ldap02): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap02): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap02): Connecting to ldap://10.132.0.32:389
rlm_ldap (ldap02): Waiting for bind result...
rlm_ldap (ldap02): Bind successful
(7)         [ldap02] = notfound
(7)       } # redundant-load-balance group = notfound
(7)       if ((ok || updated) && User-Password) {
(7)       if ((ok || updated) && User-Password)  -> FALSE
(7)       [expiration] = noop
(7)       [logintime] = noop
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0x3b55f93d3b5de34e
(7) eap: Finished EAP session with state 0x3b55f93d3b5de34e
(7) eap: Previous EAP request found for state 0x3b55f93d3b5de34e, released
from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/sites-enabled/inner-tunnel
(7) eap_mschapv2:   authenticate {
(7) mschap: WARNING: No Cleartext-Password configured.  Cannot create
NT-Password
(7) mschap: WARNING: No Cleartext-Password configured.  Cannot create
LM-Password
(7) mschap: Creating challenge hash with username: alex at domain.com
(7) mschap: Client is using MS-CHAPv2
(7) mschap: ERROR: FAILED: No NT/LM-Password.  Cannot perform authentication
(7) mschap: ERROR: MS-CHAP2-Response is incorrect
(7)     [mschap] = reject
(7)   } # authenticate = reject
(7) eap: Sending EAP Failure (code 4) ID 8 length 4
(7) eap: Freeing handler
(7)       [eap] = reject
(7)     } # authenticate = reject
(7)   Failed to authenticate the user
(7)   Using Post-Auth-Type Reject
(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7)     Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> alex at domain.com
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)       [attr_filter.access_reject] = updated
(7)       update outer.session-state {
(7)         &Module-Failure-Message := &request:Module-Failure-Message ->
'mschap: FAILED: No NT/LM-Password.  Cannot perform authentication'
(7)       } # update outer.session-state = noop
(7)     } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   MS-CHAP-Error = "\010E=691 R=1 C=24a445bc9d8a49dc02bd3e64b6ed6056 V=3
M=Authentication rejected"
(7)   EAP-Message = 0x04080004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap:   MS-CHAP-Error = "\010E=691 R=1
C=24a445bc9d8a49dc02bd3e64b6ed6056 V=3 M=Authentication rejected"
(7) eap_peap:   EAP-Message = 0x04080004
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap:   MS-CHAP-Error = "\010E=691 R=1
C=24a445bc9d8a49dc02bd3e64b6ed6056 V=3 M=Authentication rejected"
(7) eap_peap:   EAP-Message = 0x04080004
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 9 length 46
(7) eap: EAP session adding &reply:State = 0x0088f5b10781eccf
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7)   Module-Failure-Message := "mschap: FAILED: No NT/LM-Password.  Cannot
perform authentication"
(7) Sent Access-Challenge Id 214 from 10.132.0.55:1812 to 10.0.18.3:59080
length 0
(7)   EAP-Message =
0x0109002e19001703030023c73431954e9b532757d6011464b2ccb7c1c42213b5f635b403c13ea03334ecc2383f12
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x0088f5b10781eccfe8cdb7ca90a2df68
(7) Finished request
Waking up in 4.4 seconds.
(8) Received Access-Request Id 215 from 10.0.18.3:59080 to 10.132.0.55:1812
length 257
(8)   User-Name = "alex at domain.com"
(8)   NAS-IP-Address = 10.0.18.3
(8)   NAS-Port = 0
(8)   NAS-Identifier = "10.0.18.3"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Calling-Station-Id = "e0c7679158e8"
(8)   Called-Station-Id = "808db7c99bb4"
(8)   Service-Type = Framed-User
(8)   Framed-MTU = 1100
(8)   EAP-Message =
0x0209002e19001703030023130b887a0ccd01e4995523dd69ad6b20e4d2950b844df6e5ea34f423e8492109f6095a
(8)   State = 0x0088f5b10781eccfe8cdb7ca90a2df68
(8)   Aruba-Essid-Name = "test789"
(8)   Aruba-Location-Id = "80:8d:b7:c9:9b:b4"
(8)   Aruba-AP-Group = "SetMeUp-C9:9B:B4"
(8)   Message-Authenticator = 0x299f2a4c5a393099d1e35fb8d17c1353
(8) Restoring &session-state
(8)   &session-state:Module-Failure-Message := "mschap: FAILED: No
NT/LM-Password.  Cannot perform authentication"
(8) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     if ("%{request:User-Name}" =~ /^(.*)@/) {
(8)     EXPAND %{request:User-Name}
(8)        --> alex at domain.com
(8)     if ("%{request:User-Name}" =~ /^(.*)@/)  -> TRUE
(8)     if ("%{request:User-Name}" =~ /^(.*)@/)  {
(8)       update request {
(8)         EXPAND %{1}
(8)            --> alex
(8)         Stripped-User-Name := alex
(8)         EXPAND %{2}
(8)            -->
(8)         Realm :=
(8)       } # update request = noop
(8)     } # if ("%{request:User-Name}" =~ /^(.*)@/)  = noop
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Request already has destination realm set.  Ignoring
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 46
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x0088f5b10781eccf
(8) eap: Finished EAP session with state 0x0088f5b10781eccf
(8) eap: Previous EAP request found for state 0x0088f5b10781eccf, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap:   ERROR: The users session was previously rejected: returning
reject (again.)
(8) eap_peap:   This means you need to read the PREVIOUS messages in the
debug output
(8) eap_peap:   to find out the reason why the user was rejected
(8) eap_peap:   Look for "reject" or "fail".  Those earlier messages will
tell you
(8) eap_peap:   what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module
failed
(8) eap: Sending EAP Failure (code 4) ID 9 length 4
(8) eap: Failed in EAP select
(8)     [eap] = invalid
(8)   } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8)   Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject:    --> alex at domain.com
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8)     [attr_filter.access_reject] = updated
(8)     [eap] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(8)       else {
(8)         [noop] = noop
(8)       } # else = noop
(8)     } # policy remove_reply_message_if_eap = noop
(8)   } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 215 from 10.132.0.55:1812 to 10.0.18.3:59080
length 44
(8)   EAP-Message = 0x04090004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.4 seconds.

I see messages
(6)   EAP-Message = 0x02070017017376632d61736d406e696d7365732e636f6d
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "alex at domain.com"
It means inner-tunnel operates with original username, not stripped
How can I put Stripped-User-Name into it?

One of ideas to create realm domain.com but it won't help in case of every
other domain after "@"


--
Best regards, Alex Morozenko


пн, 13 серп. 2018 о 19:10 Alan Buxey <alan.buxey at gmail.com> пише:

> don't play with user-name - just ensure that you are logging the stripped
> username and that you are, for acct, proxying the stripped name
>
> alan
>
> On 13 August 2018 at 15:59, Алексей Морозенко <alexmorozenko at gmail.com>
> wrote:
>
> > Hi to all.
> > I've set up FreeRADIUS(3.0.17)+LDAP(FreeIPA) and everything works..
> > ..but some people put domain in their's login (like username at domain.com
> or
> > even username at gmail.com)
> > Authorization succeds (because of use of Stripped-User-Name) but I see
> > username at domain.com logins in my Wifi console.
> > Another issue is that FreeRADIUS proxies acct requests to the gateway
> where
> > group based policy is applied. There is no username at domain.com in LDAP,
> > just username, so I have empty group and minimal access
> > Of course, I can administratively prohibit logins with @domain.com
> (filter
> > policy), but maybe there is more elegant way to just convert User-Name
> > in Stripped-User-Name regardless of user input?
> > Thanks in advance.
> > --
> > Best regards, Alex Morozenko
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/
> > list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html


More information about the Freeradius-Users mailing list