cisco phones

[Vacheslav]

  Thank you for replying, we're getting closer to the resolution:
  tried
  Cisco-AVPair:="device-traffic-class=voice"
  Tunnel-Type := VLAN
  Tunnel-Medium-Type := IEEE-802
  Tunnel-Private-Group-ID := 23

Got:

Auth: (175) Invalid user (sql: Failed to create the pair: Invalid character ' ' in attribute): [ip phone name/<via Auth-Type = eap>] (from client Switch port 50145 cli mac)
Tue Jan 30 15:14:37 2018 : Auth: (175) Login incorrect (sql: Failed to create the pair: Invalid character ' ' in attribute): [ip phone name/<via Auth-Type = eap>] (from client Switch port 50145 cli mac)

Then I tried:

  Cisco-AVPair:=device-traffic-class=voice
  Tunnel-Type := VLAN
  Tunnel-Medium-Type := IEEE-802
  Tunnel-Private-Group-ID := 1:VOICE-LAN

With same error.

I also tried:

  Cisco-AVPair:=device-traffic-class=voice
  Tunnel-Type := VLAN
  Tunnel-Medium-Type := IEEE-802
  Tunnel-Private-Group-ID := 23

What does this mean?

-----Original Message-----
From: Freeradius-Users [mailto:freeradius-users-bounces+m_zouhairy=skno.by at lists.freeradius.org] On Behalf Of Matthew Newton
Sent: Tuesday, January 30, 2018 3:05 PM
To: freeradius-users at lists.freeradius.org
Subject: Re: cisco phones

On Tue, 2018-01-30 at 14:07 +0300, Vacheslav wrote:
> 
> cisco-avpair="device-traffic-class=voice"
> Tunnel-Type=1:VLAN
> Tunnel-Medium-Type=1:802
> Tunnel-Private-Group-ID=1:VOICE-LAN
> 
> So I added them as check attributes, with := but I got: 
> Auth: (163) Invalid user (sql: Error parsing value: Unknown or invalid 
> value "1:VLAN" for attribute Tunnel-Type):

  Tunnel-Type := VLAN
  Tunnel-Medium-Type := IEEE-802
  Tunnel-Private-Group-ID := xxx

where xxx is the VLAN number you want the device put in to.

--
Matthew

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html