Freeradius - eapol testing failure
Alan Buxey
alan.buxey at gmail.com
Mon Apr 15 09:22:21 CEST 2019
hi,
look at the debug...or even your config file - it'll tell you what
files the server is reading. in your case thats
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
so, for some reason your server is using the main system CA blob and
snakeoil certs rather than bespoke cert for the service.
change that to read the freeradius3/certs/ stuff and you'll be set
alan
On Mon, 15 Apr 2019 at 06:19, <rbbhill at gmail.com> wrote:
>
> Thanks for your help Alan,
>
> I am not using a standalone supplicant, other than the wpa_supplicant utility on the Pi with freeradius. The eapol_test configuration is pointing to the freeradius ca.der per the following configuration. As you pointed out in the previous email, the server isn't using /etc/freeradius/3.0/certs/, it is getting the ca from somewhere else. I have listed the debug output below, but I am still unable to determine the directory being called for ca presentation.
>
> #
> # eapol_test -c ttls-eap-mschapv2.conf -s testing123
> #
> network={
> ssid="example"
> key_mgmt=WPA-EAP
> eap=TTLS
> identity="bob"
> anonymous_identity="anonymous"
> password="hello"
> phase2="autheap=MSCHAPV2"
>
> #
> # Uncomment the following to perform server certificate validation.
> ca_cert="/etc/freeradius/3.0/certs/ca.der"
> }
>
>
>
>
> --Debug--
> FreeRADIUS Version 3.0.12
> Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/3.0/dictionary
> including configuration file /etc/freeradius/3.0/radiusd.conf
> including configuration file /etc/freeradius/3.0/proxy.conf
> including configuration file /etc/freeradius/3.0/clients.conf
> including files in directory /etc/freeradius/3.0/mods-enabled/
> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> including configuration file /etc/freeradius/3.0/mods-enabled/always
> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> including configuration file /etc/freeradius/3.0/mods-enabled/files
> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> including files in directory /etc/freeradius/3.0/policy.d/
> including configuration file /etc/freeradius/3.0/policy.d/canonicalization
> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> including configuration file /etc/freeradius/3.0/policy.d/cui
> including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/3.0/policy.d/debug
> including configuration file /etc/freeradius/3.0/policy.d/accounting
> including configuration file /etc/freeradius/3.0/policy.d/control
> including configuration file /etc/freeradius/3.0/policy.d/filter
> including configuration file /etc/freeradius/3.0/policy.d/eap
> including configuration file /etc/freeradius/3.0/policy.d/operator-name
> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> including files in directory /etc/freeradius/3.0/sites-enabled/
> including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/3.0/sites-enabled/default
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client ubiquiti {
> ipaddr = 192.168.2.8
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = digest
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_radutmp
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
> # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
> files {
> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> }
> # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
> # Loaded module rlm_detail
> # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
> detail {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> eap {
> default_eap_type = "peap"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail auth_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail reply_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> instantiate {
> }
> # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
> # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
> # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
> # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
> # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/3.0/certs"
> pem_file_type = yes
> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> ca_file = "/etc/ssl/certs/ca-certificates.crt"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/3.0/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> ecdh_curve = "prime256v1"
> cache {
> ecdh_curve = "prime256v1"
> cache {
> enable = yes
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/3.0/radiusd.conf
> } # server
> server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server inner-tunnel
> server default { # from file /etc/freeradius/3.0/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 39598
> Listening on proxy address :: port 32944
> Ready to process requests
> (0) Received Access-Request Id 0 from 127.0.0.1:35583 to 127.0.0.1:1812 length 132
> (0) User-Name = "anonymous"
> (0) NAS-IP-Address = 127.0.0.1
> (0) Calling-Station-Id = "02-00-00-00-00-01"
> (0) Framed-MTU = 1400
> (0) NAS-Port-Type = Wireless-802.11
> (0) Service-Type = Framed-User
> (0) Connect-Info = "CONNECT 11Mbps 802.11b"
> (0) EAP-Message = 0x0200000e01616e6f6e796d6f7573
> (0) Message-Authenticator = 0xe91a0a4211375b1ec592ef82043b6839
> (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: Peer sent EAP Response (code 2) ID 0 length 14
> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = eap
> (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (0) authenticate {
> (0) eap: Peer sent packet with method EAP Identity (1)
> (0) eap: Calling submodule eap_peap to process data
> (0) eap_peap: Initiating new EAP-TLS session
> (0) eap_peap: [eaptls start] = request
> (0) eap: Sending EAP Request (code 1) ID 1 length 6
> (0) eap: EAP session adding &reply:State = 0xa1b0858aa1b19c09
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Using Post-Auth-Type Challenge
> (0) Post-Auth-Type sub-section not found. Ignoring.
> (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0
> (0) EAP-Message = 0x010100061920
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0xa1b0858aa1b19c0998614206367371a6
> (0) Finished request
> Waking up in 4.9 seconds.
> (1) Received Access-Request Id 1 from 127.0.0.1:35583 to 127.0.0.1:1812 length 318
> (1) User-Name = "anonymous"
> (1) NAS-IP-Address = 127.0.0.1
> (1) Calling-Station-Id = "02-00-00-00-00-01"
> (1) Framed-MTU = 1400
> (1) NAS-Port-Type = Wireless-802.11
> (1) Service-Type = Framed-User
> (1) Connect-Info = "CONNECT 11Mbps 802.11b"
> (1) Service-Type = Framed-User
> (1) Connect-Info = "CONNECT 11Mbps 802.11b"
> (1) EAP-Message = 0x020100b61980000000ac16030100a7010000a30303860bf8a8872d1814268455ce17a2a87e0d798884edef35eb0ee04b06fe9b8e20000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c02$
> (1) State = 0xa1b0858aa1b19c0998614206367371a6
> (1) Message-Authenticator = 0x90b9549c1e19de3cc3f127394790a5fc
> (1) session-state: No cached attributes
> (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ / /) {
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) [digest] = noop
> (1) suffix: Checking for suffix after "@"
> (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (1) suffix: No such realm "NULL"
> (1) [suffix] = noop
> (1) eap: Peer sent EAP Response (code 2) ID 1 length 182
> (1) eap: Continuing tunnel setup
> (1) [eap] = ok
> (1) } # authorize = ok
> (1) Found Auth-Type = eap
> (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (1) authenticate {
> (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (1) authenticate {
> (1) eap: Expiring EAP session with state 0xa1b0858aa1b19c09
> (1) eap: Finished EAP session with state 0xa1b0858aa1b19c09
> (1) eap: Previous EAP request found for state 0xa1b0858aa1b19c09, released from the list
> (1) eap: Peer sent packet with method EAP PEAP (25)
> (1) eap: Calling submodule eap_peap to process data
> (1) eap_peap: Continuing EAP-TLS
> (1) eap_peap: Peer indicated complete TLS record size will be 172 bytes
> (1) eap_peap: Got complete TLS record (172 bytes)
> (1) eap_peap: [eaptls verify] = length included
> (1) eap_peap: (other): before SSL initialization
> (1) eap_peap: TLS_accept: before SSL initialization
> (1) eap_peap: TLS_accept: before SSL initialization
> (1) eap_peap: <<< recv TLS 1.2 [length 00a7]
> (1) eap_peap: TLS_accept: SSLv3/TLS read client hello
> (1) eap_peap: >>> send TLS 1.2 [length 003d]
> (1) eap_peap: TLS_accept: SSLv3/TLS write server hello
> (1) eap_peap: >>> send TLS 1.2 [length 02d9]
> (1) eap_peap: TLS_accept: SSLv3/TLS write certificate
> (1) eap_peap: >>> send TLS 1.2 [length 014d]
> (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange
> (1) eap_peap: >>> send TLS 1.2 [length 0004]
> (1) eap_peap: TLS_accept: SSLv3/TLS write server done
> (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
> (1) eap_peap: In SSL Handshake Phase
> (1) eap_peap: In SSL Accept mode
> (1) eap_peap: [eaptls process] = handled
> (1) eap: Sending EAP Request (code 1) ID 2 length 1004
> (1) eap: EAP session adding &reply:State = 0xa1b0858aa0b29c09
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) Post-Auth-Type sub-section not found. Ignoring.
> (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0
> (1) EAP-Message = 0x010203ec19c00000047b160303003d0200003903032c3dd45b424431005f4380406ed090071978ceaa63a168b4b345da59a69bd69800c030000011ff01000100000b0004030001020017000016030302d90b000$
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0xa1b0858aa0b29c0998614206367371a6
> (1) Finished request
> Waking up in 4.4 seconds.
> (1) Finished request
> Waking up in 4.4 seconds.
> (2) Received Access-Request Id 2 from 127.0.0.1:35583 to 127.0.0.1:1812 length 142
> (2) User-Name = "anonymous"
> (2) NAS-IP-Address = 127.0.0.1
> (2) Calling-Station-Id = "02-00-00-00-00-01"
> (2) Framed-MTU = 1400
> (2) NAS-Port-Type = Wireless-802.11
> (2) Service-Type = Framed-User
> (2) Connect-Info = "CONNECT 11Mbps 802.11b"
> (2) EAP-Message = 0x020200061900
> (2) State = 0xa1b0858aa0b29c0998614206367371a6
> (2) Message-Authenticator = 0x14d43f9302cd8700a726df43ba10eb6d
> (2) session-state: No cached attributes
> (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ / /) {
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) [digest] = noop
> (2) suffix: Checking for suffix after "@"
> (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) [suffix] = noop
> (2) eap: Peer sent EAP Response (code 2) ID 2 length 6
> (2) eap: Continuing tunnel setup
> (2) [eap] = ok
> (2) } # authorize = ok
> (2) Found Auth-Type = eap
> (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (2) authenticate {
> (2) eap: Expiring EAP session with state 0xa1b0858aa0b29c09
> (2) eap: Finished EAP session with state 0xa1b0858aa0b29c09
> (2) eap: Previous EAP request found for state 0xa1b0858aa0b29c09, released from the list
> (2) eap: Peer sent packet with method EAP PEAP (25)
> (2) eap: Calling submodule eap_peap to process data
> (2) eap_peap: Continuing EAP-TLS
> (2) eap_peap: Peer ACKed our handshake fragment
> (2) eap_peap: [eaptls verify] = request
> (2) eap_peap: [eaptls process] = handled
> (2) eap: Sending EAP Request (code 1) ID 3 length 159
> (2) eap: EAP session adding &reply:State = 0xa1b0858aa3b39c09
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) Post-Auth-Type sub-section not found. Ignoring.
> (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0
> (2) EAP-Message = 0x0103009f1900288cc33aa919f74cbdfb1fadaf8ac3a901f95d86cbe5fb4bb4d84cac8f3a8b60a3e5dabcf82c5079577efa11938f12a720ffea242b9b235c775df675f2adbefe2e8796a8d0fd1a95fe76e923790$
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0xa1b0858aa3b39c0998614206367371a6
> (2) Finished request
> Waking up in 4.4 seconds.
> (3) Received Access-Request Id 3 from 127.0.0.1:35583 to 127.0.0.1:1812 length 153
> (3) User-Name = "anonymous"
> (3) NAS-IP-Address = 127.0.0.1
> (3) Calling-Station-Id = "02-00-00-00-00-01"
> (3) Framed-MTU = 1400
> (3) NAS-Port-Type = Wireless-802.11
> (3) Service-Type = Framed-User
> (3) Connect-Info = "CONNECT 11Mbps 802.11b"
> (3) EAP-Message = 0x0203001119800000000715030300020230
> (3) Connect-Info = "CONNECT 11Mbps 802.11b"
> (3) EAP-Message = 0x0203001119800000000715030300020230
> (3) State = 0xa1b0858aa3b39c0998614206367371a6
> (3) Message-Authenticator = 0xa20feef604022ea0d15e1afbf4edf672
> (3) session-state: No cached attributes
> (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (3) authorize {
> (3) policy filter_username {
> (3) if (&User-Name) {
> (3) if (&User-Name) -> TRUE
> (3) if (&User-Name) {
> (3) if (&User-Name =~ / /) {
> (3) if (&User-Name =~ / /) -> FALSE
> (3) if (&User-Name =~ /@[^@]*@/ ) {
> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (3) if (&User-Name =~ /\.\./ ) {
> (3) if (&User-Name =~ /\.\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (3) if (&User-Name =~ /\.$/) {
> (3) if (&User-Name =~ /\.$/) -> FALSE
> (3) if (&User-Name =~ /@\./) {
> (3) if (&User-Name =~ /@\./) -> FALSE
> (3) } # if (&User-Name) = notfound
> (3) } # policy filter_username = notfound
> (3) [preprocess] = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) [digest] = noop
> (3) suffix: Checking for suffix after "@"
> (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (3) suffix: No such realm "NULL"
> (3) [suffix] = noop
> (3) eap: Peer sent EAP Response (code 2) ID 3 length 17
> (3) eap: Continuing tunnel setup
> (3) [eap] = ok
> (3) } # authorize = ok
> (3) Found Auth-Type = eap
> (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (3) authenticate {
> (3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09
> (3) authenticate {
> (3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09
> (3) eap: Finished EAP session with state 0xa1b0858aa3b39c09
> (3) eap: Previous EAP request found for state 0xa1b0858aa3b39c09, released from the list
> (3) eap: Peer sent packet with method EAP PEAP (25)
> (3) eap: Calling submodule eap_peap to process data
> (3) eap_peap: Continuing EAP-TLS
> (3) eap_peap: Peer indicated complete TLS record size will be 7 bytes
> (3) eap_peap: Got complete TLS record (7 bytes)
> (3) eap_peap: [eaptls verify] = length included
> (3) eap_peap: <<< recv TLS 1.2 [length 0002]
> (3) eap_peap: ERROR: TLS Alert read:fatal:unknown CA
> (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
> (3) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
> (3) eap_peap: ERROR: System call (I/O) error (-1)
> (3) eap_peap: ERROR: TLS receive handshake failed during operation
> (3) eap_peap: ERROR: [eaptls process] = fail
> (3) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
> (3) eap: Sending EAP Failure (code 4) ID 3 length 4
> (3) eap: Failed in EAP select
> (3) [eap] = invalid
> (3) } # authenticate = invalid
> (3) Failed to authenticate the user
> (3) Using Post-Auth-Type Reject
> (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (3) Post-Auth-Type REJECT {
> (3) attr_filter.access_reject: EXPAND %{User-Name}
> (3) attr_filter.access_reject: --> anonymous
> (3) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (3) [attr_filter.access_reject] = updated
> (3) [eap] = noop
> (3) policy remove_reply_message_if_eap {
> (3) if (&reply:EAP-Message && &reply:Reply-Message) {
> (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (3) else {
> (3) [noop] = noop
> (3) } # else = noop
> (3) } # policy remove_reply_message_if_eap = noop
> (3) } # Post-Auth-Type REJECT = updated
> (3) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> (3) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (3) Sending delayed response
> (3) Sent Access-Reject Id 3 from 127.0.0.1:1812 to 127.0.0.1:35583 length 44
> (3) EAP-Message = 0x04030004
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.3 seconds.
> (0) Cleaning up request packet ID 0 with timestamp +13
> Waking up in 0.4 seconds.
> (1) Cleaning up request packet ID 1 with timestamp +13
> (2) Cleaning up request packet ID 2 with timestamp +14
> (3) Cleaning up request packet ID 3 with timestamp +14
> Ready to process requests
> (4) Received Access-Request Id 0 from 127.0.0.1:53791 to 127.0.0.1:1812 length 132
> (4) User-Name = "anonymous"
> (4) NAS-IP-Address = 127.0.0.1
> (4) Calling-Station-Id = "02-00-00-00-00-01"
> (4) Framed-MTU = 1400
> (4) NAS-Port-Type = Wireless-802.11
> (4) Service-Type = Framed-User
> (4) Connect-Info = "CONNECT 11Mbps 802.11b"
> (4) EAP-Message = 0x0200000e01616e6f6e796d6f7573
> (4) Message-Authenticator = 0x74f485700ace38d3a912177314edd716
> (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (4) authorize {
> (4) policy filter_username {
> (4) if (&User-Name) {
> (4) if (&User-Name) -> TRUE
> (4) if (&User-Name) {
> (4) if (&User-Name =~ / /) {
> (4) if (&User-Name =~ / /) -> FALSE
> (4) if (&User-Name =~ /@[^@]*@/ ) {
> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (4) if (&User-Name =~ /\.\./ ) {
> (4) if (&User-Name =~ /\.\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (4) if (&User-Name =~ /\.$/) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /@\./) -> FALSE
> (4) } # if (&User-Name) = notfound
> (4) } # policy filter_username = notfound
> (4) [preprocess] = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) [digest] = noop
> (4) suffix: Checking for suffix after "@"
> (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (4) suffix: No such realm "NULL"
> (4) [suffix] = noop
> (4) eap: Peer sent EAP Response (code 2) ID 0 length 14
> (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (4) [eap] = ok
> (4) } # authorize = ok
> (4) Found Auth-Type = eap
> (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (4) authenticate {
> (4) eap: Peer sent packet with method EAP Identity (1)
> (4) eap: Calling submodule eap_peap to process data
> (4) eap_peap: Initiating new EAP-TLS session
> (4) eap_peap: [eaptls start] = request
> (4) eap: Sending EAP Request (code 1) ID 1 length 6
> (4) eap: EAP session adding &reply:State = 0x7cb2fc507cb3e55b
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Using Post-Auth-Type Challenge
> (4) Post-Auth-Type sub-section not found. Ignoring.
> (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (4) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
> (4) EAP-Message = 0x010100061920
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0x7cb2fc507cb3e55b86cd612645cba906
> (4) Finished request
> Waking up in 4.9 seconds.
> (5) Received Access-Request Id 1 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142
> (5) User-Name = "anonymous"
> (5) NAS-IP-Address = 127.0.0.1
> (5) Calling-Station-Id = "02-00-00-00-00-01"
> (5) NAS-IP-Address = 127.0.0.1
> (5) Calling-Station-Id = "02-00-00-00-00-01"
> (5) Framed-MTU = 1400
> (5) NAS-Port-Type = Wireless-802.11
> (5) Service-Type = Framed-User
> (5) Connect-Info = "CONNECT 11Mbps 802.11b"
> (5) EAP-Message = 0x020100060315
> (5) State = 0x7cb2fc507cb3e55b86cd612645cba906
> (5) Message-Authenticator = 0xad804965169d36f2bb3fbe585f3220a4
> (5) session-state: No cached attributes
> (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (5) authorize {
> (5) policy filter_username {
> (5) if (&User-Name) {
> (5) if (&User-Name) -> TRUE
> (5) if (&User-Name) {
> (5) if (&User-Name =~ / /) {
> (5) if (&User-Name =~ / /) -> FALSE
> (5) if (&User-Name =~ /@[^@]*@/ ) {
> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (5) if (&User-Name =~ /\.\./ ) {
> (5) if (&User-Name =~ /\.\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (5) if (&User-Name =~ /\.$/) {
> (5) if (&User-Name =~ /\.$/) -> FALSE
> (5) if (&User-Name =~ /@\./) {
> (5) if (&User-Name =~ /@\./) -> FALSE
> (5) } # if (&User-Name) = notfound
> (5) } # policy filter_username = notfound
> (5) [preprocess] = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) [digest] = noop
> (5) suffix: Checking for suffix after "@"
> (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (5) suffix: No such realm "NULL"
> (5) [suffix] = noop
> (5) eap: Peer sent EAP Response (code 2) ID 1 length 6
> (5) eap: No EAP Start, assuming it's an on-going EAP conversation
> (5) [eap] = updated
> (5) eap: No EAP Start, assuming it's an on-going EAP conversation
> (5) [eap] = updated
> (5) [files] = noop
> (5) [expiration] = noop
> (5) [logintime] = noop
> (5) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
> (5) pap: WARNING: Authentication will fail unless a "known good" password is available
> (5) [pap] = noop
> (5) } # authorize = updated
> (5) Found Auth-Type = eap
> (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (5) authenticate {
> (5) eap: Expiring EAP session with state 0x7cb2fc507cb3e55b
> (5) eap: Finished EAP session with state 0x7cb2fc507cb3e55b
> (5) eap: Previous EAP request found for state 0x7cb2fc507cb3e55b, released from the list
> (5) eap: Peer sent packet with method EAP NAK (3)
> (5) eap: Found mutually acceptable type TTLS (21)
> (5) eap: Calling submodule eap_ttls to process data
> (5) eap_ttls: Initiating new EAP-TLS session
> (5) eap_ttls: [eaptls start] = request
> (5) eap: Sending EAP Request (code 1) ID 2 length 6
> (5) eap: EAP session adding &reply:State = 0x7cb2fc507db0e95b
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Using Post-Auth-Type Challenge
> (5) Post-Auth-Type sub-section not found. Ignoring.
> (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (5) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
> (5) EAP-Message = 0x010200061520
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0x7cb2fc507db0e95b86cd612645cba906
> (5) Finished request
> Waking up in 4.9 seconds.
> (6) Received Access-Request Id 2 from 127.0.0.1:53791 to 127.0.0.1:1812 length 314
> (6) User-Name = "anonymous"
> (6) NAS-IP-Address = 127.0.0.1
> (6) Calling-Station-Id = "02-00-00-00-00-01"
> (6) Framed-MTU = 1400
> (6) NAS-Port-Type = Wireless-802.11
> (6) Service-Type = Framed-User
> (6) Connect-Info = "CONNECT 11Mbps 802.11b"
> (6) Service-Type = Framed-User
> (6) Connect-Info = "CONNECT 11Mbps 802.11b"
> (6) EAP-Message = 0x020200b2150016030100a7010000a30303e51f51535de3983944d2582d0174d45753f0a856d58bf732c0992d00fd150a29000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00$
> (6) State = 0x7cb2fc507db0e95b86cd612645cba906
> (6) Message-Authenticator = 0x909d8709bdfa74503ee132f431a8b8f0
> (6) session-state: No cached attributes
> (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ / /) {
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) [preprocess] = ok
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) [digest] = noop
> (6) suffix: Checking for suffix after "@"
> (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (6) suffix: No such realm "NULL"
> (6) [suffix] = noop
> (6) eap: Peer sent EAP Response (code 2) ID 2 length 178
> (6) eap: Continuing tunnel setup
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = eap
> (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (6) authenticate {
> (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (6) authenticate {
> (6) eap: Expiring EAP session with state 0x7cb2fc507db0e95b
> (6) eap: Finished EAP session with state 0x7cb2fc507db0e95b
> (6) eap: Previous EAP request found for state 0x7cb2fc507db0e95b, released from the list
> (6) eap: Peer sent packet with method EAP TTLS (21)
> (6) eap: Calling submodule eap_ttls to process data
> (6) eap_ttls: Authenticate
> (6) eap_ttls: Continuing EAP-TLS
> (6) eap_ttls: [eaptls verify] = ok
> (6) eap_ttls: Done initial handshake
> (6) eap_ttls: (other): before SSL initialization
> (6) eap_ttls: TLS_accept: before SSL initialization
> (6) eap_ttls: TLS_accept: before SSL initialization
> (6) eap_ttls: <<< recv TLS 1.2 [length 00a7]
> (6) eap_ttls: TLS_accept: SSLv3/TLS read client hello
> (6) eap_ttls: >>> send TLS 1.2 [length 003d]
> (6) eap_ttls: TLS_accept: SSLv3/TLS write server hello
> (6) eap_ttls: >>> send TLS 1.2 [length 02d9]
> (6) eap_ttls: TLS_accept: SSLv3/TLS write certificate
> (6) eap_ttls: >>> send TLS 1.2 [length 014d]
> (6) eap_ttls: TLS_accept: SSLv3/TLS write key exchange
> (6) eap_ttls: >>> send TLS 1.2 [length 0004]
> (6) eap_ttls: TLS_accept: SSLv3/TLS write server done
> (6) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
> (6) eap_ttls: In SSL Handshake Phase
> (6) eap_ttls: In SSL Accept mode
> (6) eap_ttls: [eaptls process] = handled
> (6) eap: Sending EAP Request (code 1) ID 3 length 1004
> (6) eap: EAP session adding &reply:State = 0x7cb2fc507eb1e95b
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) Using Post-Auth-Type Challenge
> (6) Post-Auth-Type sub-section not found. Ignoring.
> (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (6) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
> (6) EAP-Message = 0x010303ec15c00000047b160303003d020000390303a48ec3291ffdad331434cd1f53656a17297fa14fa438832d137d7062f380961a00c030000011ff01000100000b0004030001020017000016030302d90b000$
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0x7cb2fc507eb1e95b86cd612645cba906
> (6) Finished request
> Waking up in 4.5 seconds.
> (6) Finished request
> Waking up in 4.5 seconds.
> (7) Received Access-Request Id 3 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142
> (7) User-Name = "anonymous"
> (7) NAS-IP-Address = 127.0.0.1
> (7) Calling-Station-Id = "02-00-00-00-00-01"
> (7) Framed-MTU = 1400
> (7) NAS-Port-Type = Wireless-802.11
> (7) Service-Type = Framed-User
> (7) Connect-Info = "CONNECT 11Mbps 802.11b"
> (7) EAP-Message = 0x020300061500
> (7) State = 0x7cb2fc507eb1e95b86cd612645cba906
> (7) Message-Authenticator = 0xf57e52dc860514e1764acd8786783de4
> (7) session-state: No cached attributes
> (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ / /) {
> (7) if (&User-Name =~ / /) -> FALSE
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) [preprocess] = ok
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) [digest] = noop
> (7) suffix: Checking for suffix after "@"
> (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (7) suffix: No such realm "NULL"
> ((7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (7) suffix: No such realm "NULL"
> (7) [suffix] = noop
> (7) eap: Peer sent EAP Response (code 2) ID 3 length 6
> (7) eap: Continuing tunnel setup
> (7) [eap] = ok
> (7) } # authorize = ok
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (7) authenticate {
> (7) eap: Expiring EAP session with state 0x7cb2fc507eb1e95b
> (7) eap: Finished EAP session with state 0x7cb2fc507eb1e95b
> (7) eap: Previous EAP request found for state 0x7cb2fc507eb1e95b, released from the list
> (7) eap: Peer sent packet with method EAP TTLS (21)
> (7) eap: Calling submodule eap_ttls to process data
> (7) eap_ttls: Authenticate
> (7) eap_ttls: Continuing EAP-TLS
> (7) eap_ttls: Peer ACKed our handshake fragment
> (7) eap_ttls: [eaptls verify] = request
> (7) eap_ttls: [eaptls process] = handled
> (7) eap: Sending EAP Request (code 1) ID 4 length 163
> (7) eap: EAP session adding &reply:State = 0x7cb2fc507fb6e95b
> (7) [eap] = handled
> (7) } # authenticate = handled
> (7) Using Post-Auth-Type Challenge
> (7) Post-Auth-Type sub-section not found. Ignoring.
> (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (7) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
> (7) EAP-Message = 0x010400a315800000047bd69a449daa4cab88a2395250ee31e2f61df036299c8d214844e9a4262a33f7dc86ee88f1cd5798105e54d219748d7ec63624ddfb4c8c3aa0cafead3bc956443ddcc15681270e33f8b2f$
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) State = 0x7cb2fc507fb6e95b86cd612645cba906
> (7) Finished request
> Waking up in 4.4 seconds.
> (8) Received Access-Request Id 4 from 127.0.0.1:53791 to 127.0.0.1:1812 length 149
> (8) User-Name = "anonymous"
> (8) NAS-IP-Address = 127.0.0.1
> (8) Calling-Station-Id = "02-00-00-00-00-01"
> (8) Framed-MTU = 1400
> (8) NAS-Port-Type = Wireless-802.11
> (8) Service-Type = Framed-User
> (8) Connect-Info = "CONNECT 11Mbps 802.11b"
> (8) Service-Type = Framed-User
> (8) Connect-Info = "CONNECT 11Mbps 802.11b"
> (8) EAP-Message = 0x0204000d150015030300020230
> (8) State = 0x7cb2fc507fb6e95b86cd612645cba906
> (8) Message-Authenticator = 0xda8bbc41c56e142e1af7d9e1eb13d763
> (8) session-state: No cached attributes
> (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
> (8) authorize {
> (8) policy filter_username {
> (8) if (&User-Name) {
> (8) if (&User-Name) -> TRUE
> (8) if (&User-Name) {
> (8) if (&User-Name =~ / /) {
> (8) if (&User-Name =~ / /) -> FALSE
> (8) if (&User-Name =~ /@[^@]*@/ ) {
> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (8) if (&User-Name =~ /\.\./ ) {
> (8) if (&User-Name =~ /\.\./ ) -> FALSE
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (8) if (&User-Name =~ /\.$/) {
> (8) if (&User-Name =~ /\.$/) -> FALSE
> (8) if (&User-Name =~ /@\./) {
> (8) if (&User-Name =~ /@\./) -> FALSE
> (8) } # if (&User-Name) = notfound
> (8) } # policy filter_username = notfound
> (8) [preprocess] = ok
> (8) [chap] = noop
> (8) [mschap] = noop
> (8) [digest] = noop
> (8) suffix: Checking for suffix after "@"
> (8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (8) suffix: No such realm "NULL"
> (8) [suffix] = noop
> (8) eap: Peer sent EAP Response (code 2) ID 4 length 13
> (8) eap: Continuing tunnel setup
> (8) [eap] = ok
> (8) } # authorize = ok
> (8) Found Auth-Type = eap
> (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (8) authenticate {
> (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (8) authenticate {
> (8) eap: Expiring EAP session with state 0x7cb2fc507fb6e95b
> (8) eap: Finished EAP session with state 0x7cb2fc507fb6e95b
> (8) eap: Previous EAP request found for state 0x7cb2fc507fb6e95b, released from the list
> (8) eap: Peer sent packet with method EAP TTLS (21)
> (8) eap: Calling submodule eap_ttls to process data
> (8) eap_ttls: Authenticate
> (8) eap_ttls: Continuing EAP-TLS
> (8) eap_ttls: [eaptls verify] = ok
> (8) eap_ttls: Done initial handshake
> (8) eap_ttls: <<< recv TLS 1.2 [length 0002]
> (8) eap_ttls: ERROR: TLS Alert read:fatal:unknown CA
> (8) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
> (8) eap_ttls: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
> (8) eap_ttls: ERROR: System call (I/O) error (-1)
> (8) eap_ttls: ERROR: TLS receive handshake failed during operation
> (8) eap_ttls: ERROR: [eaptls process] = fail
> (8) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed
> (8) eap: Sending EAP Failure (code 4) ID 4 length 4
> (8) eap: Failed in EAP select
> (8) [eap] = invalid
> (8) } # authenticate = invalid
> (8) Failed to authenticate the user
> (8) Using Post-Auth-Type Reject
> (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (8) Post-Auth-Type REJECT {
> (8) attr_filter.access_reject: EXPAND %{User-Name}
> (8) attr_filter.access_reject: --> anonymous
> (8) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (8) [attr_filter.access_reject] = updated
> (8) [eap] = noop
> (8) policy remove_reply_message_if_eap {
> (8) if (&reply:EAP-Message && &reply:Reply-Message) {
> (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (8) else {
> (8) [noop] = noop
> (8) } # else = noop
> (8) } # policy remove_reply_message_if_eap = noop
> (8) } # Post-Auth-Type REJECT = updated
> (8) Delaying response for 1.000000 seconds
> (8) } # Post-Auth-Type REJECT = updated
> (8) Delaying response for 1.000000 seconds
> Waking up in 0.2 seconds.
> Waking up in 0.7 seconds.
> (8) Sending delayed response
> (8) Sent Access-Reject Id 4 from 127.0.0.1:1812 to 127.0.0.1:53791 length 44
> (8) EAP-Message = 0x04040004
> (8) Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.3 seconds.
> (4) Cleaning up request packet ID 0 with timestamp +37
> (5) Cleaning up request packet ID 1 with timestamp +37
> Waking up in 0.3 seconds.
> (6) Cleaning up request packet ID 2 with timestamp +38
> (7) Cleaning up request packet ID 3 with timestamp +38
> Waking up in 0.1 seconds.
> (8) Cleaning up request packet ID 4 with timestamp +38
> Ready to process requests
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+rbbhill=gmail.com at lists.freeradius.org> On Behalf Of Alan DeKok
> Sent: Sunday, April 14, 2019 6:35 PM
> To: FreeRadius users mailing list <freeradius-users at lists.freeradius.org>
> Subject: Re: Freeradius - eapol testing failure
>
> On Apr 14, 2019, at 7:18 PM, rbbhill at gmail.com wrote:
> >
> > Hi all, thanks for your help in advance. I have spent the last week
> > trying to solve this issue, I have read and read all information I can
> > find. I have set up a raspberry pi 3, with freeradius 3.0 and openssl.
> > For the freeradius I have followed the guides by each detail in full,
> > the only exception is replacing etc/raddb with etc/freeradius/3.0. The
> > freeradius server is set up and running and I have completed testing
> > with local host using radtest and eapol. Test results:
>
> OK.
>
> >
> > PAP
> > Localhost = Ok, passes - used radtest bob hello localhost 0 testing123
> >
> > EAP (using EAPOL)
> > PEAPv0_EAP-MSCHAPv2 = Ok, Passes
> > EAP-TTLS_EAP-MSCHAPv2 = Ok, Passes
>
> That's good.
>
> > Good so far, next I edit EAPOL test scripts to uncomment so as to use
> > the test certs for testing. The only thing I changed here was
> > /etc/raddb/certs/ca.der to /etc/freeradius/3.0/certs/ca.der so as to
> > point test utility to the correct directory.
>
> Sure.
>
> > EAP (using EAPOL with cert check uncommented)
> > PEAPv0_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
> > EAP-TTLS_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
>
> That means you haven't told eapol_test what the CA cert is.
>
> The eapol_test configuration file *should* point to the correct CA file. If that's done, then the "unknown CA" error should go away.
>
> > I followed deployingradius, and used make to build certs, they are all
> > populated in the directory, but tests repeatedly fail. This same error
> > comes up repeatedly across peap and ttls using cert:
> >
> > Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert
> > read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls:
> > TLS_accept: Need to read more data: SSLv3/TLS write server done Sun
> > Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__
> > (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL
> > routines:ssl3_read_bytes:tlsv1 alert unknown ca
>
> That's eapol_test telling FreeRADIUS that eapol_test doesn't like the CA cert being presented by FreeRADIUS.
>
> If this authentication isn't with eapol_test, then the same comment applies. Configure the supplicant to know about the CA cert used by FreeRADIUS.
>
> > Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O)
> > error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive
> > handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR:
> > (9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 :
> > ERROR: (9) eap: Failed continuing EAP TTLS (21) session. EAP
> > sub-module failed
> >
> > I am very new to radius, and I am trying to setup the server to test
> > with some headless devices, and they need to be able to support PEAP,
> > TLS, and TTLS with certs. I went as far as setting a completely
> > identical server on another Pi and tried with production certificates,
> > with same error. The only thing I notice different is that when I
> > access the network with my iphone, the public cert it sends my iphone
> > is completely different than any of the certs in /etc/freeradius/3.0/certs/.
>
> Then the server isn't using /etc/freeradius/3.0/certs/, is it?
>
> READ the debug output. ALL OF IT. It will print out what files it's reading, including which certificates it's reading. Those are the certificates you need to use.
>
> > Verbose log:
> > Sun Apr 14 16:55:58 2019 : Info: Ready to process requests
>
> PLEASE read the documentation on what to post to the list. When you join the list, you get an email message telling to read the documentation. It includes a URL. PLEASE read it.
>
> http://wiki.freeradius.org/list-help
>
> Alan DeKok.
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list