Freeradius-Users Digest, Vol 165, Issue 71
Eero Volotinen
eero.volotinen at iki.fi
Mon Jan 28 08:49:12 CET 2019
Well. try removing this:
try removing this line
DEFAULT Group == "disabled", Auth-Type := Reject
Reply-Message = "Your account has been disabled."
and keep that pam line in config file..
Check that user password is correct and add some more debug to pam_google
authenticator line like adding debug *) switch to it and then check out pam
logging..
https://github.com/google/google-authenticator-libpam/blob/master/man/pam_google_authenticator.8.md
Eero
On Mon, Jan 28, 2019 at 9:37 AM Soklang Sum <soklang.sum at cambotech.com>
wrote:
> Dear Eero Volotinen,
>
> Can you give me more details the guide its work or link preference how to
> do it?
>
> My problem in this step:
>
> # vi /etc/raddb/users
> DEFAULT Group == "disabled", Auth-Type := Reject
> Reply-Message = "Your account has been disabled."
> DEFAULT Auth-Type := PAM
>
> When I enable the step as mention above, it always rejected.
>
> This is RADIUS Debugs in my attachment file.
>
>
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> cambotech.com at lists.freeradius.org> On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Monday, January 28, 2019 2:13 PM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 165, Issue 71
>
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
> 1. Re: Contents of Freeradius-Users digest...Google
> Authenticator (Eero Volotinen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 28 Jan 2019 09:12:17 +0200
> From: Eero Volotinen <eero.volotinen at iki.fi>
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>, soklang.sum at cambotech.com
> Subject: Re: Contents of Freeradius-Users digest...Google
> Authenticator
> Message-ID:
> <CABzZrXdo9ExvdiNDjo5485NKnjp=
> QfaZfwhU+GdMVO7V9i592g at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> works fine. remember to run freeradius as root or else it cannot access
> google authenticator files
>
> Eero
>
> On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum at cambotech.com wrote:
>
> > Dear Team Freeradius,
> >
> > I would like to ask about FreeRADIUS work with google authenticator
> > (2FA) or not?
> > I have tried to install freeRADIUS with google authenticator but it
> > doesn't work, when I try install following the guideline any website
> > like https://networkjutsu.com/freeradius-google-authenticator/ it
> > always rejected.
> >
> > So that why I want to make sure from team expertise freeRADIUS it work
> > with google authenticator or not?
> >
> > But I saw in the guideline it works but for me never work.
> >
> > Please help feedback soon as possible.
> >
> > Thanks
> >
> > -----Original Message-----
> > From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> > cambotech.com at lists.freeradius.org> On Behalf Of
> > freeradius-users-request at lists.freeradius.org
> > Sent: Monday, January 28, 2019 11:42 AM
> > To: freeradius-users at lists.freeradius.org
> > Subject: Freeradius-Users Digest, Vol 165, Issue 69
> >
> > Send Freeradius-Users mailing list submissions to
> > freeradius-users at lists.freeradius.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.freeradius.org/mailman/listinfo/freeradius-users
> > or, via email, send a message with subject or body 'help' to
> > freeradius-users-request at lists.freeradius.org
> >
> > You can reach the person managing the list at
> > freeradius-users-owner at lists.freeradius.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than
> > "Re: Contents of Freeradius-Users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher)
> > 2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok)
> > 3. Multiple UserDN for different LDAPs (diego.barzon at tiscali.it)
> > 4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum)
> > 5. radius accounting issue. (slnarayanan at nitt.edu)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sun, 27 Jan 2019 11:43:12 -0600
> > From: Ian Pilcher <arequipeno at gmail.com>
> > To: freeradius-users at lists.freeradius.org
> > Subject: EAP-GTC w/ "PAP-like" LDAP authentication
> > Message-ID: <q2kqjg$4fa3$1 at blaine.gmane.org>
> > Content-Type: text/plain; charset=utf-8; format=flowed
> >
> > I am struggling to find documentation of how to set up $SUBJECT.
> >
> > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
> > using a file-based test user, but the number of different protocols
> > and configurations supported and documented in the config files means
> > that I haven't been able to figure out how to achieve what I want.
> >
> > Any hints, links, etc. would be appreciated.
> >
> > Thanks!
> >
> > --
> > ========================================================================
> > Ian Pilcher arequipeno at gmail.com
> > -------- "I grew up before Mark Zuckerberg invented friendship"
> > --------
> > ======================================================================
> > ==
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Sun, 27 Jan 2019 14:17:58 -0500
> > From: Alan DeKok <aland at deployingradius.com>
> > To: FreeRadius users mailing list
> > <freeradius-users at lists.freeradius.org>
> > Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication
> > Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5 at deployingradius.com>
> > Content-Type: text/plain; charset=us-ascii
> >
> > On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno at gmail.com> wrote:
> > >
> > > I am struggling to find documentation of how to set up $SUBJECT.
> > >
> > > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
> > > using a file-based test user, but the number of different protocols
> > > and configurations supported and documented in the config files
> > > means that I haven't been able to figure out how to achieve what I
> want.
> >
> > (a) Make sure PEAP works with certificates.
> >
> > (b) configure and enable LDAP. See mods-available/ldap
> >
> > Once the LDAP module is available, the server will automatically use
> it.
> >
> > And, the server will automatically grab passwords from LDAP. And,
> > the server will automatically use those passwords to do EAP-GTC.
> >
> > It really is that easy. The key thing is to *let the server do the
> > work*. Don't try to "force" a particular kind of authentication. EAP
> > doesn't work that way.
> >
> > If you're using Active Directory, it's harder. Because Active
> > Directory isn't a real LDAP server.
> >
> > It also helps to describe what you've done, what happened, and why
> > you think it's wrong. Otherwise, we're limited to:
> >
> > Q: I tried stuff and it doesn't work. What do I do?
> > A: Try different stuff
> >
> > Which isn't helpful to anyone. Better questions means better answers.
> >
> > Alan DeKok.
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Mon, 28 Jan 2019 00:27:28 +0100
> > From: diego.barzon at tiscali.it
> > To: <freeradius-users at lists.freeradius.org>
> > Subject: Multiple UserDN for different LDAPs
> > Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb at tiscali.it>
> > Content-Type: text/plain; charset=UTF-8
> >
> >
> >
> > Hi all,
> > here's the problem.
> > I need to authenticate against 2
> > different LDAP servers, populated with different data. I don't need
> > specific information (like group memberships or so): trying to bind
> > with the credentials is enough.
> > In 'authorize' I set Auth to LDAP and in authenticate I put something
> > like this:
> > ldap1{
> > fail = 1
> > invalid = 2
> >
> > reject = 3
> > }
> > if (!ok) {
> > ldap2
> > }
> > ldap1 and ldap2 configurations are on
> > separate files, they are different in everything: the former's a DC,
> > the latter an openldap server. Moreover they have different BaseDN.
> > It
> > looks like freeradius set UserDN for the first ldap and tries to use
> > the same on the second. I think I need two different values for
> > LDAP-UserDN, which is not possible, but I read there's some kind of
> > workaround involving writing on files/authorize but honestly I didn't
> > understand what I'm supposed to do.
> > Thanks in advance!
> >
> >
> >
> > Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per
> > sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY!
> > http://tisca.li/myopen
> >
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Mon, 28 Jan 2019 11:14:50 +0700
> > From: "Soklang Sum" <soklang.sum at cambotech.com>
> > To: <freeradius-users at lists.freeradius.org>
> > Subject: Freeradius-Users Digest, Vol 165, Issue 68
> > Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Dear Team Freeradius,
> >
> > I would like to ask about FreeRADIUS work with google authenticator
> > (2FA) or not?
> > I have tried to install freeRADIUS with google authenticator but it
> > doesn't work, when I try install following the guideline any website
> > like https://networkjutsu.com/freeradius-google-authenticator/ it
> > always rejected.
> >
> > So that why I want to make sure from team expertise freeRADIUS it work
> > with google authenticator or not?
> >
> > But I saw in the guideline it works but for me never work.
> >
> > Please help feedback soon as possible.
> >
> > Thanks
> >
> > ===================
> >
> > -----Original Message-----
> > From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> > cambotech.com at lists.freeradius.org> On Behalf Of
> > freeradius-users-request at lists.freeradius.org
> > Sent: Sunday, January 27, 2019 6:00 PM
> > To: freeradius-users at lists.freeradius.org
> > Subject: Freeradius-Users Digest, Vol 165, Issue 68
> >
> > Send Freeradius-Users mailing list submissions to
> > freeradius-users at lists.freeradius.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.freeradius.org/mailman/listinfo/freeradius-users
> > or, via email, send a message with subject or body 'help' to
> > freeradius-users-request at lists.freeradius.org
> >
> > You can reach the person managing the list at
> > freeradius-users-owner at lists.freeradius.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than
> > "Re: Contents of Freeradius-Users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Session start times issues (Philemon Jaomalaza)
> > 2. Re: Session start times issues (Alan DeKok)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sat, 26 Jan 2019 16:43:23 +0300
> > From: "Philemon Jaomalaza" <philemon.jaomalaza at gmail.com>
> > To: "'FreeRadius users mailing list'"
> > <freeradius-users at lists.freeradius.org>
> > Subject: Session start times issues
> > Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > Hello,
> > If the nas has a wrong date and time, the sqlcounter does not work
> > correctly.
> >
> > The attribute Event-Timestamp got the wrong data and time from nas.
> >
> > I found this features in preacct substitution:
> >
> > update request {
> > &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> > %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> > }
> >
> > I uncomente it but nothing change.
> >
> > Where is the best way to have the good local time of radius server on
> > "acctstarttime" column of "radacct" on sql database ?
> >
> > JMLZ
> >
> >
> >
> > ---
> > L'absence de virus dans ce courrier électronique a été vérifiée par le
> > logiciel antivirus Avast.
> > https://www.avast.com/antivirus
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Sat, 26 Jan 2019 14:35:02 -0500
> > From: Alan DeKok <aland at deployingradius.com>
> > To: FreeRadius users mailing list
> > <freeradius-users at lists.freeradius.org>
> > Subject: Re: Session start times issues
> > Message-ID: <717983BF-2594-4316-807F-0726F706BD53 at deployingradius.com>
> > Content-Type: text/plain; charset=us-ascii
> >
> > On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza <
> > philemon.jaomalaza at gmail.com> wrote:
> > > If the nas has a wrong date and time, the sqlcounter does not work
> > correctly.
> >
> > If I take the tires off of my car, it doesn't drive well.
> >
> > Solution: fix the REAL problem.
> >
> > > The attribute Event-Timestamp got the wrong data and time from nas.
> >
> > Fix the NAS. Anything else is an ugly hack.
> >
> > > I found this features in preacct substitution:
> > >
> > > update request {
> > > &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> > %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> > > }
> > >
> > > I uncomente it but nothing change.
> > >
> > > Where is the best way to have the good local time of radius server
> > > on
> > "acctstarttime" column of "radacct" on sql database ?
> >
> > Fix the NAS.
> >
> > Alan DeKok.
> >
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> > ------------------------------
> >
> > End of Freeradius-Users Digest, Vol 165, Issue 68
> > *************************************************
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Mon, 28 Jan 2019 10:05:15 +0530
> > From: slnarayanan at nitt.edu
> > To: FreeRadius users mailing list
> > <freeradius-users at lists.freeradius.org>
> > Subject: radius accounting issue.
> > Message-ID:
> >
> > <20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6 at webmail.nitt.edu>
> > Content-Type: text/plain; charset="utf-8"; Format="flowed";
> > DelSp="Yes"
> >
> >
> > Dear All,
> >
> > I have a problem with accounting .Everything is working fine on
> > freeradius.Login& authentication sql everything is working fine.But i
> > have a problem in accounting pocket.We are using sonciwall firwall in
> > our campus.Those who logged through our radius server the login
> > information (Radius Accounting) information need to display on
> > sonicwall user's page.The UDP pocket 1813 not send to our firewall
> > ip.In the firewall i have enable policy allow to all our local
> > network.I have attached my radiususd -X log to this mail.Kindly
> > provide the solution for resolve my issue.The Radius Accounting
> > information now shows on radacct in the phpmyadmin.
> >
> > Regards.
> > S.Lakshmi narayanan
> >
> > -------------- next part -------------- FreeRADIUS Version 3.0.13
> > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the
> > terms of the GNU General Public License For more information about
> > these matters, see the file named COPYRIGHT Starting - reading
> > configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary including
> > dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/raddb/dictionary including
> > configuration file /etc/raddb/radiusd.conf including configuration
> > file /etc/raddb/proxy.conf including configuration file
> > /etc/raddb/clients.conf including files in directory
> > /etc/raddb/mods-enabled/ including configuration file
> > /etc/raddb/mods-enabled/always including configuration file
> > /etc/raddb/mods-enabled/attr_filter
> > including configuration file /etc/raddb/mods-enabled/cache_eap
> > including configuration file /etc/raddb/mods-enabled/chap including
> > configuration file /etc/raddb/mods-enabled/date including
> > configuration file /etc/raddb/mods-enabled/detail including
> > configuration file /etc/raddb/mods-enabled/detail.log
> > including configuration file /etc/raddb/mods-enabled/dhcp including
> > configuration file /etc/raddb/mods-enabled/digest including
> > configuration file /etc/raddb/mods-enabled/dynamic_clients
> > including configuration file /etc/raddb/mods-enabled/eap including
> > configuration file /etc/raddb/mods-enabled/echo including
> > configuration file /etc/raddb/mods-enabled/exec including
> > configuration file /etc/raddb/mods-enabled/expiration
> > including configuration file /etc/raddb/mods-enabled/expr including
> > configuration file /etc/raddb/mods-enabled/files including
> > configuration file /etc/raddb/mods-enabled/linelog including
> > configuration file /etc/raddb/mods-enabled/logintime including
> > configuration file /etc/raddb/mods-enabled/mschap including
> > configuration file /etc/raddb/mods-enabled/ntlm_auth including
> > configuration file /etc/raddb/mods-enabled/pap including configuration
> > file /etc/raddb/mods-enabled/passwd including configuration file
> > /etc/raddb/mods-enabled/preprocess
> > including configuration file /etc/raddb/mods-enabled/radutmp including
> > configuration file /etc/raddb/mods-enabled/realm including
> > configuration file /etc/raddb/mods-enabled/replicate including
> > configuration file /etc/raddb/mods-enabled/soh including configuration
> > file /etc/raddb/mods-enabled/sradutmp including configuration file
> > /etc/raddb/mods-enabled/unix including configuration file
> > /etc/raddb/mods-enabled/unpack including configuration file
> > /etc/raddb/mods-enabled/utf8 including configuration file
> > /etc/raddb/mods-enabled/sql including configuration file
> > /etc/raddb/mods-config/sql/main/mysql/queries.conf
> > including files in directory /etc/raddb/policy.d/ including
> > configuration file /etc/raddb/policy.d/accounting including
> > configuration file /etc/raddb/policy.d/canonicalization
> > including configuration file /etc/raddb/policy.d/control including
> > configuration file /etc/raddb/policy.d/cui including configuration
> > file /etc/raddb/policy.d/debug including configuration file
> > /etc/raddb/policy.d/dhcp including configuration file
> > /etc/raddb/policy.d/eap including configuration file
> > /etc/raddb/policy.d/filter including configuration file
> > /etc/raddb/policy.d/operator-name including files in directory
> > /etc/raddb/sites-enabled/ including configuration file
> > /etc/raddb/sites-enabled/default including configuration file
> > /etc/raddb/sites-enabled/inner-tunnel
> > main {
> > security {
> > user = "radiusd"
> > group = "radiusd"
> > allow_core_dumps = no
> > }
> > name = "radiusd"
> > prefix = "/usr"
> > localstatedir = "/var"
> > logdir = "/var/log/radius"
> > run_dir = "/var/run/radiusd"
> > }
> > main {
> > name = "radiusd"
> > prefix = "/usr"
> > localstatedir = "/var"
> > sbindir = "/usr/sbin"
> > logdir = "/var/log/radius"
> > run_dir = "/var/run/radiusd"
> > libdir = "/usr/lib64/freeradius"
> > radacctdir = "/var/log/radius/radacct"
> > hostname_lookups = no
> > max_request_time = 30
> > cleanup_delay = 5
> > max_requests = 16384
> > pidfile = "/var/run/radiusd/radiusd.pid"
> > checkrad = "/usr/sbin/checkrad"
> > debug_level = 0
> > proxy_requests = no
> > log {
> > stripped_names = yes
> > auth = yes
> > auth_badpass = yes
> > auth_goodpass = yes
> > colourise = yes
> > msg_denied = "You are already logged in - access denied"
> > }
> > resources {
> > }
> > security {
> > max_attributes = 200
> > reject_delay = 1.000000
> > status_server = yes
> > }
> > }
> > radiusd: #### Loading Realms and Home Servers #### proxy server {
> > retry_delay = 5
> > retry_count = 3
> > default_fallback = no
> > dead_time = 120
> > wake_all_if_all_dead = no
> > }
> > home_server localhost {
> > ipaddr = 127.0.0.1
> > port = 1812
> > type = "auth"
> > secret = <<< secret >>>
> > response_window = 20.000000
> > response_timeouts = 1
> > max_outstanding = 65536
> > zombie_period = 40
> > status_check = "status-server"
> > ping_interval = 30
> > check_interval = 30
> > check_timeout = 4
> > num_answers_to_alive = 3
> > revive_interval = 120
> > limit {
> > max_connections = 16
> > max_requests = 0
> > lifetime = 0
> > idle_timeout = 0
> > }
> > coa {
> > irt = 2
> > mrt = 16
> > mrc = 5
> > mrd = 30
> > }
> > }
> > home_server_pool my_auth_failover {
> > type = fail-over
> > home_server = localhost
> > }
> > realm example.com {
> > auth_pool = my_auth_failover
> > }
> > realm LOCAL {
> > }
> > realm int {
> > virtual_server = inner-tunnel
> > }
> > radiusd: #### Loading Clients ####
> > client localhost {
> > ipv4addr = *
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > nas_type = "other"
> > proto = "udp"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 0
> > }
> > }
> > Debugger not attached
> > # Creating Auth-Type = mschap
> > # Creating Auth-Type = eap
> > # Creating Auth-Type = NTLMAuth
> > # Creating Auth-Type = MS-CHAP
> > # Creating Autz-Type = Status-Server
> > # Creating Acct-Type = Status-Server
> > # Creating Auth-Type = NTLM_AUTH
> > radiusd: #### Instantiating modules #### modules {
> > # Loaded module rlm_always
> > # Loading module "reject" from file /etc/raddb/mods-enabled/always
> > always reject {
> > rcode = "reject"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "fail" from file /etc/raddb/mods-enabled/always
> > always fail {
> > rcode = "fail"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "ok" from file /etc/raddb/mods-enabled/always
> > always ok {
> > rcode = "ok"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "handled" from file /etc/raddb/mods-enabled/always
> > always handled {
> > rcode = "handled"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "invalid" from file /etc/raddb/mods-enabled/always
> > always invalid {
> > rcode = "invalid"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "userlock" from file /etc/raddb/mods-enabled/always
> > always userlock {
> > rcode = "userlock"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "notfound" from file /etc/raddb/mods-enabled/always
> > always notfound {
> > rcode = "notfound"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "noop" from file /etc/raddb/mods-enabled/always
> > always noop {
> > rcode = "noop"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "updated" from file /etc/raddb/mods-enabled/always
> > always updated {
> > rcode = "updated"
> > simulcount = 0
> > mpp = no
> > }
> > # Loaded module rlm_attr_filter
> > # Loading module "attr_filter.post-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.post-proxy {
> > filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.pre-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.pre-proxy {
> > filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_reject" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.access_reject {
> > filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_challenge" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.access_challenge {
> > filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.accounting_response" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.accounting_response {
> > filename =
> "/etc/raddb/mods-config/attr_filter/accounting_response"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loaded module rlm_cache
> > # Loading module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap
> > cache cache_eap {
> > driver = "rlm_cache_rbtree"
> > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> > ttl = 15
> > max_entries = 0
> > epoch = 0
> > add_stats = no
> > }
> > # Loaded module rlm_chap
> > # Loading module "chap" from file /etc/raddb/mods-enabled/chap
> > # Loaded module rlm_date
> > # Loading module "date" from file /etc/raddb/mods-enabled/date
> > date {
> > format = "%b %e %Y %H:%M:%S %Z"
> > }
> > # Loaded module rlm_detail
> > # Loading module "detail" from file /etc/raddb/mods-enabled/detail
> > detail {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> > detail auth_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
> > detail reply_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "pre_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > detail pre_proxy_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "post_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > detail post_proxy_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_dhcp
> > # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
> > # Loaded module rlm_digest
> > # Loading module "digest" from file /etc/raddb/mods-enabled/digest
> > # Loaded module rlm_dynamic_clients
> > # Loading module "dynamic_clients" from file
> > /etc/raddb/mods-enabled/dynamic_clients
> > # Loaded module rlm_eap
> > # Loading module "eap" from file /etc/raddb/mods-enabled/eap
> > eap {
> > default_eap_type = "peap"
> > timer_expire = 60
> > ignore_unknown_eap_types = no
> > cisco_accounting_username_bug = no
> > max_sessions = 16384
> > }
> > # Loaded module rlm_exec
> > # Loading module "echo" from file /etc/raddb/mods-enabled/echo
> > exec echo {
> > wait = yes
> > program = "/bin/echo %{User-Name}"
> > input_pairs = "request"
> > output_pairs = "reply"
> > shell_escape = yes
> > }
> > # Loading module "exec" from file /etc/raddb/mods-enabled/exec
> > exec {
> > wait = no
> > input_pairs = "request"
> > shell_escape = yes
> > timeout = 10
> > }
> > # Loaded module rlm_expiration
> > # Loading module "expiration" from file
> > /etc/raddb/mods-enabled/expiration
> > # Loaded module rlm_expr
> > # Loading module "expr" from file /etc/raddb/mods-enabled/expr
> > expr {
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > }
> > # Loaded module rlm_files
> > # Loading module "files" from file /etc/raddb/mods-enabled/files
> > files {
> > filename = "/etc/raddb/mods-config/files/authorize"
> > acctusersfile = "/etc/raddb/mods-config/files/accounting"
> > preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> > }
> > # Loaded module rlm_linelog
> > # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
> > linelog {
> > filename = "/var/log/radius/linelog"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = "This is a log message for %{User-Name}"
> > reference = "messages.%{%{reply:Packet-Type}:-default}"
> > }
> > # Loading module "log_accounting" from file
> > /etc/raddb/mods-enabled/linelog
> > linelog log_accounting {
> > filename = "/var/log/radius/linelog-accounting"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = ""
> > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> > }
> > # Loaded module rlm_logintime
> > # Loading module "logintime" from file
> /etc/raddb/mods-enabled/logintime
> > logintime {
> > minimum_timeout = 60
> > }
> > # Loaded module rlm_mschap
> > # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
> > mschap {
> > use_mppe = yes
> > require_encryption = yes
> > require_strong = yes
> > with_ntdomain_hack = yes
> > ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> > --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-
> > OCTA.EDU} --challenge=%{mschap:Challenge:-00}
> > --nt-response=%{mschap:NT-Response:-00}"
> > ntlm_auth_timeout = 10
> > passchange {
> > ntlm_auth = "/usr/bin/ntlm_auth
> > --helper-protocol=ntlm-change-password-1"
> > ntlm_auth_username = "username: %{mschap:User-Name}"
> > ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}"
> > }
> > allow_retry = yes
> > winbind_retry_with_normalised_username = no
> > }
> > # Loading module "ntlm_auth" from file
> /etc/raddb/mods-enabled/ntlm_auth
> > exec ntlm_auth {
> > wait = yes
> > program = "/usr/bin/ntlm_auth --request-nt-key
> > --domain=OCTA.EDU --username=%{mschap:User-Name}
> --password=%{User-Password}"
> > shell_escape = yes
> > }
> > # Loaded module rlm_pap
> > # Loading module "pap" from file /etc/raddb/mods-enabled/pap
> > pap {
> > normalise = yes
> > }
> > # Loaded module rlm_passwd
> > # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> > passwd etc_passwd {
> > filename = "/etc/passwd"
> > format = "*User-Name:Cleartext-Password:"
> > delimiter = ":"
> > ignore_nislike = no
> > ignore_empty = yes
> > allow_multiple_keys = no
> > hash_size = 100
> > }
> > # Loaded module rlm_preprocess
> > # Loading module "preprocess" from file
> > /etc/raddb/mods-enabled/preprocess
> > preprocess {
> > huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> > hints = "/etc/raddb/mods-config/preprocess/hints"
> > with_ascend_hack = no
> > ascend_channels_per_line = 23
> > with_ntdomain_hack = no
> > with_specialix_jetstream_hack = no
> > with_cisco_vsa_hack = no
> > with_alvarion_vsa_hack = no
> > }
> > # Loaded module rlm_radutmp
> > # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> > radutmp {
> > filename = "/var/log/radius/radutmp"
> > username = "%{User-Name}"
> > case_sensitive = no
> > check_with_nas = yes
> > permissions = 384
> > caller_id = yes
> > }
> > # Loaded module rlm_realm
> > # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
> > realm IPASS {
> > format = "prefix"
> > delimiter = "/"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
> > realm suffix {
> > format = "suffix"
> > delimiter = "@"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
> > realm realmpercent {
> > format = "suffix"
> > delimiter = "%"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
> > realm ntdomain {
> > format = "prefix"
> > delimiter = "\\"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loaded module rlm_replicate
> > # Loading module "replicate" from file
> /etc/raddb/mods-enabled/replicate
> > # Loaded module rlm_soh
> > # Loading module "soh" from file /etc/raddb/mods-enabled/soh
> > soh {
> > dhcp = yes
> > }
> > # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> > radutmp sradutmp {
> > filename = "/var/log/radius/sradutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 420
> > caller_id = no
> > }
> > # Loaded module rlm_unix
> > # Loading module "unix" from file /etc/raddb/mods-enabled/unix
> > unix {
> > radwtmp = "/var/log/radius/radwtmp"
> > }
> > Creating attribute Unix-Group
> > # Loaded module rlm_unpack
> > # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
> > # Loaded module rlm_utf8
> > # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
> > # Loaded module rlm_sql
> > # Loading module "sql" from file /etc/raddb/mods-enabled/sql
> > sql {
> > driver = "rlm_sql_mysql"
> > server = "localhost"
> > port = 3306
> > login = "root"
> > password = <<< secret >>>
> > radius_db = "radius"
> > read_groups = yes
> > read_profiles = yes
> > read_clients = yes
> > delete_stale_sessions = yes
> > sql_user_name = "%{User-Name}"
> > logfile = "/var/log/radius/sqllog.sql"
> > default_user_profile = ""
> > client_query = "SELECT id, nasname, shortname, type, secret,
> > server FROM nas"
> > authorize_check_query = "SELECT id, username, attribute,
> > value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > authorize_reply_query = "SELECT id, username, attribute,
> > value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > authorize_group_check_query = "SELECT id, groupname,
> > attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}'
> ORDER BY id"
> > authorize_group_reply_query = "SELECT id, groupname,
> > attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}'
> ORDER BY id"
> > group_membership_query = "SELECT groupname FROM radusergroup
> > WHERE username = '%{SQL-User-Name}' ORDER BY priority"
> > simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
> > username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
> > simul_verify_query = "SELECT radacctid, acctsessionid,
> > username, nasipaddress, nasportid, framedipaddress, callingstationid,
> > framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
> acctstoptime IS NULL"
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> > accounting {
> > reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> > type {
> > accounting-on {
> > query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> > }
> > accounting-off {
> > query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> > }
> > start {
> > query = "INSERT INTO radacct (acctsessionid,
> > acctuniqueid, username, realm,
> > nasipaddress, nasportid, nasporttype, acctstarttime,
> > acctupdatetime, acctstoptime, acctsessiontime,
> > acctauthentic, connectinfo_start, connectinfo_stop,
> > acctinputoctets, acctoutputoctets, calledstationid,
> > callingstationid, acctterminatecause, servicetype,
> > framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> > '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> > '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
> > '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
> > '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> > '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> > '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
> > }
> > interim-update {
> > query = "UPDATE radacct SET acctupdatetime =
> > (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval =
> > %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> > framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> > '%{Acct-Unique-Session-Id}'"
> > }
> > stop {
> > query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> > '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> > AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> > }
> > }
> > }
> > post-auth {
> > reference = ".query"
> > query = "INSERT INTO radpostauth (username, pass, reply,
> > authdate) VALUES ( '%{SQL-User-Name}',
> > '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')"
> > }
> > }
> > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> > linked Creating attribute SQL-Group
> > instantiate {
> > }
> > # Instantiating module "reject" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> > # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> > # Instantiating module "handled" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "invalid" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "userlock" from file
> > /etc/raddb/mods-enabled/always
> > # Instantiating module "notfound" from file
> > /etc/raddb/mods-enabled/always
> > # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> > # Instantiating module "updated" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "attr_filter.post-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> > # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> > # Instantiating module "attr_filter.access_reject" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> > [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> > [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> > "DEFAULT".
> > # Instantiating module "attr_filter.access_challenge" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> > # Instantiating module "attr_filter.accounting_response" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/raddb/mods-config/attr_filter/accounting_response
> > # Instantiating module "cache_eap" from file
> > /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver
> > rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
> > # Instantiating module "detail" from file
> /etc/raddb/mods-enabled/detail
> > # Instantiating module "auth_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> > # Instantiating module "reply_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > # Instantiating module "pre_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > # Instantiating module "post_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> > # Linked to sub-module rlm_eap_tls
> > tls {
> > tls = "tls-common"
> > }
> > tls-config tls-common {
> > verify_depth = 0
> > ca_path = "/etc/raddb/certs"
> > pem_file_type = yes
> > private_key_file = "/etc/raddb/certs/server.pem"
> > certificate_file = "/etc/raddb/certs/server.pem"
> > ca_file = "/etc/raddb/certs/ca.pem"
> > private_key_password = <<< secret >>>
> > fragment_size = 1024
> > include_length = yes
> > auto_chain = yes
> > check_crl = no
> > check_all_crl = no
> > cipher_list = "DEFAULT"
> > cipher_server_preference = no
> > ecdh_curve = "prime256v1"
> > cache {
> > enable = no
> > lifetime = 24
> > max_entries = 255
> > }
> > verify {
> > skip_if_ocsp_ok = no
> > }
> > ocsp {
> > enable = no
> > override_cert_url = yes
> > url = "http://127.0.0.1/ocsp/"
> > use_nonce = yes
> > timeout = 0
> > softfail = no
> > }
> > }
> > # Linked to sub-module rlm_eap_ttls
> > ttls {
> > tls = "tls-common"
> > default_eap_type = "md5"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > virtual_server = "inner-tunnel"
> > include_length = yes
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_peap
> > peap {
> > tls = "tls-common"
> > default_eap_type = "mschapv2"
> > copy_request_to_tunnel = yes
> > use_tunneled_reply = yes
> > proxy_tunneled_request_as_eap = no
> > virtual_server = "inner-tunnel"
> > soh = no
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_mschapv2
> > mschapv2 {
> > with_ntdomain_hack = no
> > send_error = yes
> > identity = "FreeRADIUS"
> > }
> > # Instantiating module "expiration" from file
> > /etc/raddb/mods-enabled/expiration
> > # Instantiating module "files" from file
> > /etc/raddb/mods-enabled/files reading pairlist file
> > /etc/raddb/mods-config/files/authorize
> > reading pairlist file /etc/raddb/mods-config/files/accounting
> > reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> > # Instantiating module "linelog" from file
> > /etc/raddb/mods-enabled/linelog
> > # Instantiating module "log_accounting" from file
> > /etc/raddb/mods-enabled/linelog
> > # Instantiating module "logintime" from file
> > /etc/raddb/mods-enabled/logintime
> > # Instantiating module "mschap" from file
> > /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by
> calling 'ntlm_auth'
> > # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> > # Instantiating module "etc_passwd" from file
> > /etc/raddb/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> > # Instantiating module "preprocess" from file
> > /etc/raddb/mods-enabled/preprocess
> > reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> > reading pairlist file /etc/raddb/mods-config/preprocess/hints
> > # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> > # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
> > # Instantiating module "realmpercent" from file
> > /etc/raddb/mods-enabled/realm
> > # Instantiating module "ntdomain" from file
> /etc/raddb/mods-enabled/realm
> > # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
> > rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
> > mysql {
> > tls {
> > }
> > warnings = "auto"
> > }
> > rlm_sql (sql): Attempting to connect to database "radius"
> > rlm_sql (sql): Initialising connection pool
> > pool {
> > start = 5
> > min = 3
> > max = 32
> > spare = 10
> > uses = 0
> > lifetime = 0
> > cleanup_interval = 30
> > idle_timeout = 60
> > retry_delay = 30
> > spread = no
> > }
> > rlm_sql (sql): Opening additional connection (0), 1 of 32 pending
> > slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (1), 1 of 31 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (2), 1 of 30 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (3), 1 of 29 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (4), 1 of 28 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Processing generate_sql_clients rlm_sql (sql) in
> > generate_sql_clients: query is SELECT id, nasname, shortname, type,
> > secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql
> > (sql): Executing select query: SELECT id, nasname, shortname, type,
> > secret, server FROM nas rlm_sql (sql): Adding client 10.0.0.38 (domain
> > controller) to global clients list rlm_sql (10.0.0.38): Client "domain
> > controller" (sql) added rlm_sql (sql): Adding client 10.0.0.39 (domain
> > contr-2) to global clients list rlm_sql (10.0.0.39): Client "domain
> > contr-2" (sql) added rlm_sql (sql): Adding client 10.1.172.16 (team2)
> > to global clients list rlm_sql (10.1.172.16): Client "team2" (sql)
> > added rlm_sql (sql): Adding client 10.1.172.18 (team4) to global
> > clients list rlm_sql (10.1.172.18): Client "team4" (sql) added rlm_sql
> > (sql): Adding client 10.1.172.19 (team5) to global clients list
> > rlm_sql (10.1.172.19): Client "team5" (sql) added rlm_sql (sql):
> > Adding client 10.1.172.20 (team6) to global clients list rlm_sql
> > (10.1.172.20): Client "team6" (sql) added rlm_sql (sql): Adding client
> > 10.0.0.1 (Local network) to global clients list rlm_sql (10.0.0.1):
> > Client "Local network" (sql) added rlm_sql (sql): Adding client
> > 192.168.20.1 (ACCT) to global clients list rlm_sql (192.168.20.1):
> > Client "ACCT" (sql) added rlm_sql (sql): Released connection (0) Need
> > 5 more connections to reach 10 spares rlm_sql (sql): Opening
> > additional connection (5), 1 of 27 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 } #
> > modules
> > radiusd: #### Loading Virtual Servers #### server { # from file
> > /etc/raddb/radiusd.conf } # server server default { # from file
> > /etc/raddb/sites-enabled/default # Loading authenticate {...} #
> > Loading authorize {...} Ignoring "ldap" (see
> > raddb/mods-available/README.rst) # Loading preacct {...} # Loading
> > accounting {...} } # server default server inner-tunnel { # from file
> > /etc/raddb/sites-enabled/inner-tunnel
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > # Loading session {...}
> > # Loading post-auth {...}
> > } # server inner-tunnel
> > radiusd: #### Opening IP addresses and Ports #### listen {
> > type = "auth"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 0
> > }
> > Failed binding to auth address * port 1812 bound to server default:
> > Address already in use
> > /etc/raddb/sites-enabled/default[60]: Error binding to port for
> > 0.0.0.0 port 1812
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> > ------------------------------
> >
> > End of Freeradius-Users Digest, Vol 165, Issue 69
> > *************************************************
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 165, Issue 71
> *************************************************
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list