Upgraded 3.0.12 -> 3.0.17. Doesn't answer anymore

Harald Hannelius harald.hannelius at arcada.fi
Thu Dec 17 13:34:27 CET 2020



Hello there,

I performed a dist-upgrade on a Debian 9 running freeradius-3.0.12, thus 
going to Debian 10 and freeradius-3.0.17.

I haven't touched the config, nor did I allow the dist-upgrade to do any 
changes.

After the upgrade freeradius starts, but doesn't reply on the network. I 
have tested with radtest, and it always just prints three tries and ends 
with "(0) No reply from server for ID 120 socket 3". I have done the tests 
with both -4 and -6.

I am grateful for any pointers on how to solve this problem, or at least 
where to look at for further researching it.

Dual stack IPv4/IPv6. Confirmed working in the previous installation.

Thanks



Output of freeradius -X with it just sitting there and not doing anything;

FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/inner-eap
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/debug
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/control-socket
including configuration file /etc/freeradius/3.0/sites-enabled/eduroam
including configuration file /etc/freeradius/3.0/sites-enabled/eduroam-inner-tunnel
main {
  security {
  	user = "freerad"
  	group = "freerad"
  	allow_core_dumps = no
  }
 	name = "freeradius"
 	prefix = "/usr"
 	localstatedir = "/var"
 	logdir = "/var/log/freeradius"
 	run_dir = "/var/run/freeradius"
}
main {
 	name = "freeradius"
 	prefix = "/usr"
 	localstatedir = "/var"
 	sbindir = "/usr/sbin"
 	logdir = "/var/log/freeradius"
 	run_dir = "/var/run/freeradius"
 	libdir = "/usr/lib/freeradius"
 	radacctdir = "/var/log/freeradius/radacct"
 	hostname_lookups = no
 	max_request_time = 30
 	cleanup_delay = 5
 	max_requests = 16384
 	pidfile = "/var/run/freeradius/freeradius.pid"
 	checkrad = "/usr/sbin/checkrad"
 	debug_level = 0
 	proxy_requests = yes
  log {
  	stripped_names = no
  	auth = yes
  	auth_badpass = no
  	auth_goodpass = no
  	colourise = yes
  	msg_denied = "You are already logged in - access denied"
  }
  resources {
  }
  security {
  	max_attributes = 200
  	reject_delay = 1.000000
  	status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
  	retry_delay = 5
  	retry_count = 3
  	default_fallback = no
  	dead_time = 120
  	wake_all_if_all_dead = no
  }
  home_server ftlr_funet_fi {
  	ipaddr = 193.166.5.150
  	port = 1812
  	type = "auth+acct"
  	secret = <<< secret >>>
  	response_window = 20.000000
  	response_timeouts = 1
  	max_outstanding = 65536
  	zombie_period = 40
  	status_check = "none"
  	ping_interval = 30
  	check_interval = 30
  	check_timeout = 4
  	num_answers_to_alive = 3
  	revive_interval = 60
   limit {
   	max_connections = 16
   	max_requests = 0
   	lifetime = 0
   	idle_timeout = 0
   }
   coa {
   	irt = 2
   	mrt = 16
   	mrc = 5
   	mrd = 30
   }
  }
  home_server ftlr2_funet_fi {
  	ipaddr = 193.166.4.105
  	port = 1812
  	type = "auth+acct"
  	secret = <<< secret >>>
  	response_window = 20.000000
  	response_timeouts = 1
  	max_outstanding = 65536
  	zombie_period = 40
  	status_check = "none"
  	ping_interval = 30
  	check_interval = 30
  	check_timeout = 4
  	num_answers_to_alive = 3
  	revive_interval = 60
   limit {
   	max_connections = 16
   	max_requests = 0
   	lifetime = 0
   	idle_timeout = 0
   }
   coa {
   	irt = 2
   	mrt = 16
   	mrc = 5
   	mrd = 30
   }
  }
  home_server 6ftlr_funet_fi {
  	ipv6addr = 2001:708:10:a1::2
  	port = 1812
  	type = "auth+acct"
  	secret = <<< secret >>>
  	response_window = 20.000000
  	response_timeouts = 1
  	max_outstanding = 65536
  	zombie_period = 40
  	status_check = "none"
  	ping_interval = 30
  	check_interval = 30
  	check_timeout = 4
  	num_answers_to_alive = 3
  	revive_interval = 60
   limit {
   	max_connections = 16
   	max_requests = 0
   	lifetime = 0
   	idle_timeout = 0
   }
   coa {
   	irt = 2
   	mrt = 16
   	mrc = 5
   	mrd = 30
   }
  }
  home_server 6ftlr2_funet_fi {
  	ipv6addr = 2001:708:10:a3::f2
  	port = 1812
  	type = "auth+acct"
  	secret = <<< secret >>>
  	response_window = 20.000000
  	response_timeouts = 1
  	max_outstanding = 65536
  	zombie_period = 40
  	status_check = "none"
  	ping_interval = 30
  	check_interval = 30
  	check_timeout = 4
  	num_answers_to_alive = 3
  	revive_interval = 60
   limit {
   	max_connections = 16
   	max_requests = 0
   	lifetime = 0
   	idle_timeout = 0
   }
   coa {
   	irt = 2
   	mrt = 16
   	mrc = 5
   	mrd = 30
   }
  }
  home_server localhost {
  	ipaddr = 127.0.0.1
  	port = 1812
  	type = "auth"
  	secret = <<< secret >>>
  	response_window = 20.000000
  	response_timeouts = 1
  	max_outstanding = 65536
  	zombie_period = 40
  	status_check = "status-server"
  	ping_interval = 30
  	check_interval = 30
  	check_timeout = 4
  	num_answers_to_alive = 3
  	revive_interval = 120
   limit {
   	max_connections = 16
   	max_requests = 0
   	lifetime = 0
   	idle_timeout = 0
   }
   coa {
   	irt = 2
   	mrt = 16
   	mrc = 5
   	mrd = 30
   }
  }
  home_server_pool my_auth_failover {
 	type = fail-over
 	home_server = localhost
  }
  realm example.com {
 	auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
  realm ~arcada\\.fi$ {
 	authhost = LOCAL
 	accthost = LOCAL
  }
  realm arcada.fi {
 	authhost = LOCAL
 	accthost = LOCAL
  }
  home_server_pool EDUROAM-FTLR {
 	type = fail-over
 	home_server = ftlr_funet_fi
 	home_server = ftlr2_funet_fi
 	home_server = 6ftlr_funet_fi
 	home_server = 6ftlr2_funet_fi
  }
  realm DEFAULT {
 	pool = EDUROAM-FTLR
 	nostrip
  }
radiusd: #### Loading Clients ####
  client localhost {
  	ipaddr = 127.0.0.1
  	require_message_authenticator = no
  	secret = <<< secret >>>
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
  client 193.167.36.0/25 {
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	shortname = "arcada-aps"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 193.167.36.0/25. Please fix your configuration
Support for old-style clients will be removed in a future release
  client 10.0.36.0/24 {
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	shortname = "arcada-aps"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.0.36.0/24. Please fix your configuration
Support for old-style clients will be removed in a future release
  client 10.0.36.253/32 {
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	shortname = "clustrum"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.0.36.253/32. Please fix your configuration
Support for old-style clients will be removed in a future release
  client ftlr_funet.fi {
  	ipaddr = 193.166.5.150
  	netmask = 32
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	shortname = "ftlr_funet_fi"
  	virtual_server = "eduroam"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
  client ftlr2_funet.fi {
  	ipaddr = 193.166.4.105
  	netmask = 32
  	require_message_authenticator = no
  	secret = <<< secret >>>
  	shortname = "ftlr2_funet_fi"
  	virtual_server = "eduroam"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
Debugger not attached
  # Creating Auth-Type = eap
  # Creating Auth-Type = LDAP
  # Creating Auth-Type = PAP
  # Creating Auth-Type = MS-CHAP
  # Creating Auth-Type = inner-eap
radiusd: #### Instantiating modules ####
  modules {
   # Loaded module rlm_ldap
   # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
   ldap {
   	server = "blucher.arcada.fi"
   	port = 636
   	identity = "cn=sambaadmin,dc=arcada,dc=fi"
   	password = <<< secret >>>
    sasl {
    }
    user {
    	scope = "sub"
    	access_positive = yes
     sasl {
     }
    }
    group {
    	filter = "(objectClass=posixGroup)"
    	scope = "sub"
    	name_attribute = "cn"
    	membership_attribute = "memberOf"
    	cacheable_name = no
    	cacheable_dn = no
    }
    client {
    	filter = "(objectClass=radiusClient)"
    	scope = "sub"
    	base_dn = "dc=arcada,dc=fi"
    }
    profile {
    }
    options {
    	ldap_debug = 40
    	chase_referrals = yes
    	rebind = yes
    	net_timeout = 1
    	res_timeout = 10
    	srv_timelimit = 3
    	idle = 60
    	probes = 3
    	interval = 3
    }
    tls {
    	ca_path = "/etc/ssl/certs"
    	start_tls = no
    	require_cert = "allow"
    }
   }
Creating attribute LDAP-Group
   # Loaded module rlm_exec
   # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
   exec ntlm_auth {
   	wait = yes
   	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
   	shell_escape = yes
   }
   # Loaded module rlm_digest
   # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
   # Loaded module rlm_detail
   # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
   detail {
   	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
   exec {
   	wait = no
   	input_pairs = "request"
   	shell_escape = yes
   	timeout = 10
   }
   # Loaded module rlm_radutmp
   # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
   radutmp sradutmp {
   	filename = "/var/log/freeradius/sradutmp"
   	username = "%{User-Name}"
   	case_sensitive = yes
   	check_with_nas = yes
   	permissions = 420
   	caller_id = no
   }
   # Loaded module rlm_attr_filter
   # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
   attr_filter attr_filter.post-proxy {
   	filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
   	key = "%{Realm}"
   	relaxed = no
   }
   # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
   attr_filter attr_filter.pre-proxy {
   	filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
   	key = "%{Realm}"
   	relaxed = no
   }
   # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
   attr_filter attr_filter.access_reject {
   	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
   	key = "%{User-Name}"
   	relaxed = no
   }
   # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
   attr_filter attr_filter.access_challenge {
   	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
   	key = "%{User-Name}"
   	relaxed = no
   }
   # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
   attr_filter attr_filter.accounting_response {
   	filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
   	key = "%{User-Name}"
   	relaxed = no
   }
   # Loaded module rlm_soh
   # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
   soh {
   	dhcp = yes
   }
   # Loaded module rlm_unpack
   # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
   # Loaded module rlm_files
   # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
   files {
   	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
   	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
   	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
   }
   # Loaded module rlm_replicate
   # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
   # Loaded module rlm_eap
   # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   eap {
   	default_eap_type = "md5"
   	timer_expire = 60
   	ignore_unknown_eap_types = no
   	cisco_accounting_username_bug = no
   	max_sessions = 2048
   }
   # Loaded module rlm_pap
   # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
   pap {
   	normalise = yes
   }
   # Loaded module rlm_always
   # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
   always reject {
   	rcode = "reject"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
   always fail {
   	rcode = "fail"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
   always ok {
   	rcode = "ok"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
   always handled {
   	rcode = "handled"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
   always invalid {
   	rcode = "invalid"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
   always userlock {
   	rcode = "userlock"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
   always notfound {
   	rcode = "notfound"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
   always noop {
   	rcode = "noop"
   	simulcount = 0
   	mpp = no
   }
   # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
   always updated {
   	rcode = "updated"
   	simulcount = 0
   	mpp = no
   }
   # Loaded module rlm_chap
   # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
   # Loaded module rlm_unix
   # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
   unix {
   	radwtmp = "/var/log/freeradius/radwtmp"
   }
Creating attribute Unix-Group
   # Loaded module rlm_expr
   # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
   expr {
   	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
   }
   # Loaded module rlm_dynamic_clients
   # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
   # Loaded module rlm_logintime
   # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
   logintime {
   	minimum_timeout = 60
   }
   # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   detail auth_log {
   	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   detail reply_log {
   	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   detail pre_proxy_log {
   	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   detail post_proxy_log {
   	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
   	header = "%t"
   	permissions = 384
   	locking = no
   	escape_filenames = no
   	log_packet_header = no
   }
   # Loaded module rlm_utf8
   # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
   # Loaded module rlm_passwd
   # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
   passwd etc_passwd {
   	filename = "/etc/passwd"
   	format = "*User-Name:Crypt-Password:"
   	delimiter = ":"
   	ignore_nislike = no
   	ignore_empty = yes
   	allow_multiple_keys = no
   	hash_size = 100
   }
   # Loaded module rlm_mschap
   # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
   mschap {
   	use_mppe = yes
   	require_encryption = yes
   	require_strong = yes
   	with_ntdomain_hack = yes
    passchange {
    }
   	allow_retry = yes
   	winbind_retry_with_normalised_username = no
   }
   # Loaded module rlm_expiration
   # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
   # Loaded module rlm_realm
   # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
   realm IPASS {
   	format = "prefix"
   	delimiter = "/"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
   realm suffix {
   	format = "suffix"
   	delimiter = "@"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
   realm realmpercent {
   	format = "suffix"
   	delimiter = "%"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
   realm ntdomain {
   	format = "prefix"
   	delimiter = "\\"
   	ignore_default = no
   	ignore_null = no
   }
   # Loading module "inner-eap" from file /etc/freeradius/3.0/mods-enabled/inner-eap
   eap inner-eap {
   	default_eap_type = "mschapv2"
   	timer_expire = 60
   	ignore_unknown_eap_types = no
   	cisco_accounting_username_bug = no
   	max_sessions = 2048
   }
   # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
   radutmp {
   	filename = "/var/log/freeradius/radutmp"
   	username = "%{User-Name}"
   	case_sensitive = yes
   	check_with_nas = yes
   	permissions = 384
   	caller_id = yes
   }
   # Loaded module rlm_preprocess
   # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
   preprocess {
   	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
   	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
   	with_ascend_hack = no
   	ascend_channels_per_line = 23
   	with_ntdomain_hack = no
   	with_specialix_jetstream_hack = no
   	with_cisco_vsa_hack = no
   	with_alvarion_vsa_hack = no
   }
   # Loaded module rlm_linelog
   # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
   linelog {
   	filename = "/var/log/freeradius/linelog"
   	escape_filenames = no
   	syslog_severity = "info"
   	permissions = 384
   	format = "This is a log message for %{User-Name}"
   	reference = "messages.%{%{reply:Packet-Type}:-default}"
   }
   # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
   linelog log_accounting {
   	filename = "/var/log/freeradius/linelog-accounting"
   	escape_filenames = no
   	syslog_severity = "info"
   	permissions = 384
   	format = ""
   	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
   }
   # Loaded module rlm_cache
   # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
   cache cache_eap {
   	driver = "rlm_cache_rbtree"
   	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
   	ttl = 15
   	max_entries = 0
   	epoch = 0
   	add_stats = no
   }
   # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
   exec echo {
   	wait = yes
   	program = "/bin/echo %{User-Name}"
   	input_pairs = "request"
   	output_pairs = "reply"
   	shell_escape = yes
   }
   instantiate {
   }
   # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20447
    accounting {
    	reference = "%{tolower:type.%{Acct-Status-Type}}"
    }
    post-auth {
    	reference = "."
    }
rlm_ldap (ldap): Initialising connection pool
    pool {
    	start = 5
    	min = 3
    	max = 32
    	spare = 10
    	uses = 0
    	lifetime = 0
    	cleanup_interval = 30
    	idle_timeout = 60
    	retry_delay = 30
    	spread = no
    }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://blucher.arcada.fi:636
TLS: warning: cacertdir not implemented for gnutls
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://blucher.arcada.fi:636
TLS: warning: cacertdir not implemented for gnutls
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://blucher.arcada.fi:636
TLS: warning: cacertdir not implemented for gnutls
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://blucher.arcada.fi:636
TLS: warning: cacertdir not implemented for gnutls
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://blucher.arcada.fi:636
TLS: warning: cacertdir not implemented for gnutls
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
   # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
   # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
   # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
   # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT".
   # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
   # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
   # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
   # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
    # Linked to sub-module rlm_eap_md5
    # Linked to sub-module rlm_eap_leap
    # Linked to sub-module rlm_eap_gtc
    gtc {
    	challenge = "Password: "
    	auth_type = "PAP"
    }
    # Linked to sub-module rlm_eap_tls
    tls {
    }
TLS section "tls" missing, trying to use legacy configuration
    tls {
    	verify_depth = 0
    	pem_file_type = yes
    	private_key_file = "/etc/freeradius/certs/server.pem"
    	certificate_file = "/etc/freeradius/certs/server.pem"
    	private_key_password = <<< secret >>>
    	dh_file = "/etc/freeradius/certs/dh"
    	random_file = "/etc/freeradius/certs/random"
    	fragment_size = 1024
    	include_length = yes
    	auto_chain = yes
    	check_crl = no
    	check_all_crl = no
    	cipher_list = "DEFAULT"
    	ecdh_curve = "prime256v1"
    	tls_max_version = ""
    	tls_min_version = "1.0"
     cache {
     	enable = no
     	lifetime = 24
     	max_entries = 255
     }
     verify {
     	skip_if_ocsp_ok = no
     }
     ocsp {
     	enable = no
     	override_cert_url = no
     	use_nonce = yes
     	timeout = 0
     	softfail = no
     }
    }
    # Linked to sub-module rlm_eap_ttls
    ttls {
    	default_eap_type = "mschapv2"
    	copy_request_to_tunnel = yes
    	use_tunneled_reply = yes
    	virtual_server = "eduroam-inner-tunnel"
    	include_length = yes
    	require_client_cert = no
    }
TLS section "tls" missing, trying to use legacy configuration
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_peap
    peap {
    	default_eap_type = "mschapv2"
    	copy_request_to_tunnel = no
    	use_tunneled_reply = yes
    	proxy_tunneled_request_as_eap = yes
    	virtual_server = "inner-tunnel"
    	soh = no
    	require_client_cert = no
    }
TLS section "tls" missing, trying to use legacy configuration
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_mschapv2
    mschapv2 {
    	with_ntdomain_hack = no
    	send_error = no
    }
   # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
   # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
   # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
   # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
   # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
   # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
   # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
   # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
   # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
   # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
   # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
   # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
   # Instantiating module "inner-eap" from file /etc/freeradius/3.0/mods-enabled/inner-eap
    # Linked to sub-module rlm_eap_md5
    # Linked to sub-module rlm_eap_gtc
    gtc {
    	challenge = "Password: "
    	auth_type = "PAP"
    }
    # Linked to sub-module rlm_eap_mschapv2
    mschapv2 {
    	with_ntdomain_hack = no
    	send_error = no
    }
    # Linked to sub-module rlm_eap_tls
    tls {
    }
TLS section "tls" missing, trying to use legacy configuration
    tls {
    	verify_depth = 0
    	pem_file_type = yes
    	private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
    	certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
    	ca_file = "/etc/ssl/certs/ca-certificates.crt"
    	private_key_password = <<< secret >>>
    	dh_file = "/etc/freeradius/certs/dh"
    	random_file = "/dev/urandom"
    	fragment_size = 1024
    	include_length = yes
    	auto_chain = yes
    	check_crl = no
    	check_all_crl = no
    	cipher_list = "DEFAULT"
    	ecdh_curve = "prime256v1"
    	tls_max_version = ""
    	tls_min_version = "1.0"
     cache {
     	enable = no
     	lifetime = 24
     	max_entries = 255
     }
     verify {
     	skip_if_ocsp_ok = no
     }
     ocsp {
     	enable = no
     	override_cert_url = no
     	use_nonce = yes
     	timeout = 0
     	softfail = no
     }
    }
   # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
   # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
   # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
   # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server eduroam { # from file /etc/freeradius/3.0/sites-enabled/eduroam
  # Loading authenticate {...}
  # Loading authorize {...}
  # Loading preacct {...}
  # Loading accounting {...}
  # Loading session {...}
  # Loading pre-proxy {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
} # server eduroam
server eduroam-inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/eduroam-inner-tunnel
  # Loading authenticate {...}
  # Loading authorize {...}
  # Loading preacct {...}
  # Loading accounting {...}
  # Loading session {...}
  # Loading post-auth {...}
} # server eduroam-inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "control"
  listen {
  	socket = "/var/run/freeradius/freeradius.sock"
  	peercred = yes
  }
}
Listening on command file /var/run/freeradius/freeradius.sock
Ready to process requests

-- 

Harald Hannelius | harald.hannelius/a\arcada.fi | +358 50 594 1020


More information about the Freeradius-Users mailing list