invoking the interim-update alternate query when accounting session not found

Jeff Crowe jeff at wtccommunications.ca
Tue Jun 9 15:53:26 CEST 2020


Hello,

I have a situation where one of my radius accounting servers was offline while users connected, now the interim accounting updates result in errors because it cannot find a matching accounting session (obviously). Is there a way to have freeradius invoke the alternate query in the queries.conf file to create the missing record?

From: /etc/freeradius/mods-config/sql/main/mysql/queries.conf

                interim-update {
                        #
                        #  Update an existing session and calculate the interval
                        #  between the last data we received for the session and this
                        #  update. This can be used to find stale sessions.
                        #
                        query = "\
                                UPDATE ${....acct_table1} \
                                SET \
                                        acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), \
                                        acctupdatetime  = FROM_UNIXTIME(\
                                                %{integer:Event-Timestamp}), \
                                        acctinterval    = %{integer:Event-Timestamp} - \
                                                UNIX_TIMESTAMP(@acctupdatetime_old), \
                                        framedipaddress = '%{Framed-IP-Address}', \
                                        acctsessiontime = %{%{Acct-Session-Time}:-NULL}, \
                                        acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' \
                                                << 32 | '%{%{Acct-Input-Octets}:-0}', \
                                        acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' \
                                                << 32 | '%{%{Acct-Output-Octets}:-0}' \
                                WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"

                        #
                        #  The update condition matched no existing sessions. Use
                        #  the values provided in the update to create a new session.
                        #
                        query = "\
                                INSERT INTO ${....acct_table1} \
                                        (${...column_list}) \
                                VALUES \
                                        ('%{Acct-Session-Id}', \
                                        '%{Acct-Unique-Session-Id}', \
                                        '%{SQL-User-Name}', \
                                        '%{Realm}', \
                                        '%{NAS-IP-Address}', \
                                        '%{%{NAS-Port-ID}:-%{NAS-Port}}', \
                                        '%{NAS-Port-Type}', \
                                        FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), \
                                        FROM_UNIXTIME(%{integer:Event-Timestamp}), \
                                        NULL, \
                                        %{%{Acct-Session-Time}:-NULL}, \
                                        '%{Acct-Authentic}', \
                                        '%{Connect-Info}', \
                                        '', \
                                        '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', \
                                        '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', \
                                        '%{Called-Station-Id}', \
                                        '%{Calling-Station-Id}', \
                                        '', \
                                        '%{Service-Type}', \
                                        '%{Framed-Protocol}', \
                                        '%{Framed-IP-Address}')"
                }


Debug capture of failed update:

rad-acct-king-2:~# freeradius -X -d /etc/freeradius
FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/sql
including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/linelog
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/debug
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/status
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 205.189.48.17 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "pm3-west"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 205.189.48.17. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 172.19.2.99 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "aggr-wprt-asr1002-1"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 172.19.2.99. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 172.19.2.100 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "aggr-wprt-asr1002-2"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 172.19.2.100. Please fix your configuration
Support for old-style clients will be removed in a future release
 client 172.19.2.192 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "aggr-wprt-mx104-1"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 172.19.2.192. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Autz-Type = Status-Server
 # Creating Auth-Type = digest
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
        filename = "/etc/freeradius/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/freeradius/mods-enabled/sql
  sql sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 3306
        login = "freerad"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = no
        delete_stale_sessions = yes
        sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{sql-SQL-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{sql-SQL-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,          acctuniqueid,           username, realm,                  nasipaddress,           nasportid, nasporttype,            acctstarttime,          acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,      connectinfo_stop,       acctinputoctets, acctoutputoctets,       calledstationid,        callingstationid, acctterminatecause,     servicetype,            framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime    = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        query = "INSERT INTO radpostauth (username, pass, reply, authdate, reason) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S', '%{reply:Reply-Message}')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute sql-SQL-Group
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  instantiate {
  }
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"       found in filter list for realm "DEFAULT". 
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"  found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.3.22
   mysql {
    tls {
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 64
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 64 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 63 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 62 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 61 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 60 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-0+deb10u1, protocol version 10
  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server status { # from file /etc/freeradius/sites-enabled/status
 # Loading authorize {...}
} # server status
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "status"
        ipaddr = 127.0.0.1
        port = 18121
  client admin {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
  }
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on status address 127.0.0.1 port 18121 bound to server status
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 46467
Listening on proxy address :: port 58309
Ready to process requests
(0) Received Accounting-Request Id 149 from 172.19.2.192:53535 to 172.19.2.35:1813 length 390
(0)   User-Name = "cxusername"
(0)   Acct-Status-Type = Interim-Update
(0)   Acct-Session-Id = "24367"
(0)   Event-Timestamp = "Jun  9 2020 09:35:00 EDT"
(0)   Acct-Input-Octets = 1232081388
(0)   Acct-Output-Octets = 862013286
(0)   Acct-Session-Time = 5751579
(0)   Acct-Input-Packets = 147817553
(0)   Acct-Output-Packets = 335060766
(0)   Acct-Delay-Time = 0
(0)   Service-Type = Framed-User
(0)   Framed-Protocol = PPP
(0)   Attr-26.4874.177 = 0x506f72742073706565643a2032303030303030306b
(0)   Acct-Authentic = RADIUS
(0)   ERX-Dhcp-Mac-Addr = "78e3.b569.cfa7"
(0)   Framed-IP-Address = 1.2.3.4
(0)   Framed-IP-Netmask = 255.255.255.255
(0)   ERX-Input-Gigapkts = 0
(0)   Acct-Input-Gigawords = 7
(0)   NAS-Identifier = "aggr-mx104-1"
(0)   NAS-Port = 52
(0)   NAS-Port-Id = "ae6.demux0.3221225847:52"
(0)   NAS-Port-Type = Ethernet
(0)   ERX-Output-Gigapkts = 0
(0)   Acct-Output-Gigawords = 100
(0)   ERX-IPv6-Acct-Input-Octets = 0
(0)   ERX-IPv6-Acct-Output-Octets = 0
(0)   ERX-IPv6-Acct-Input-Packets = 0
(0)   ERX-IPv6-Acct-Output-Packets = 0
(0)   ERX-IPv6-Acct-Input-Gigawords = 0
(0)   ERX-IPv6-Acct-Output-Gigawords = 0
(0)   ERX-Virtual-Router-Name = "default:internet"
(0)   ERX-Pppoe-Description = "pppoe 78:e3:b5:69:cf:a7"
(0)   NAS-IP-Address = 172.19.2.192
(0) # Executing section preacct from file /etc/freeradius/sites-enabled/default
(0)   preacct {
(0)     [preprocess] = ok
(0)     policy acct_unique {
(0)       update request {
(0)         &Tmp-String-9 := "ai:"
(0)       } # update request = noop
(0)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&       ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(0)       EXPAND %{hex:&Class}
(0)          --> 
(0)       EXPAND ^%{hex:&Tmp-String-9}
(0)          --> ^61693a
(0)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&       ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE
(0)       else {
(0)         update request {
(0)           EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(0)              --> f4e2b974a457942478b811ae16067bc6
(0)           &Acct-Unique-Session-Id := f4e2b974a457942478b811ae16067bc6
(0)         } # update request = noop
(0)       } # else = noop
(0)     } # policy acct_unique = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "cxusername", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0)   } # preacct = ok
(0) # Executing section accounting from file /etc/freeradius/sites-enabled/default
(0)   accounting {
(0)     [unix] = noop
(0) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(0) sql:    --> type.interim-update.query
(0) sql: Using query template 'query'
(0) sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}
(0) sql:    --> cxusername
(0) sql: SQL-User-Name set to 'cxusername'
(0) sql: EXPAND UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'
(0) sql:    --> UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(1591709700), acctinterval    = 1591709700 - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '1.2.3.4', acctsessiontime = 5751579, acctinputoctets = '7' << 32 | '1232081388', acctoutputoctets = '100' << 32 | '862013286' WHERE AcctUniqueId = 'f4e2b974a457942478b811ae16067bc6'
(0) sql: Executing query: UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(1591709700), acctinterval    = 1591709700 - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '1.2.3.4', acctsessiontime = 5751579, acctinputoctets = '7' << 32 | '1232081388', acctoutputoctets = '100' << 32 | '862013286' WHERE AcctUniqueId = 'f4e2b974a457942478b811ae16067bc6'
(0) sql: ERROR: rlm_sql_mysql: ERROR 1054 (Unknown column 'acct_session_id' in 'where clause'): 42S22
(0) sql: SQL query returned: server error
(0)     [sql] = fail
(0)   } # accounting = fail
(0) Not sending reply to client.
(0) Finished request
(0) Cleaning up request packet ID 149 with timestamp +0
Ready to process request


Regards,
Jeff Crowe




More information about the Freeradius-Users mailing list