ipv6 address in users file

[Marcin Romanowski]

Hello,
I have problem with provide IPv6 from users file.
I use files as redundant when sql will broke.

in file:

2001:db8:2:8000::       Cleartext-Password := 'cisco'
                Cisco-Service-info = 'QU;1433600000;D;1433600000',
                Cisco-Avpair +=
'subscriber:accounting-list=FRAD_BRAS_ISG_ACCT',
                Framed-IPv6-Prefix = '2001:db8:2:8000::/56',
                Idle-Timeout = 10800,
                Cisco-Avpair += 'subscriber:idle-timeout-direction=inbound'

for ipv4 I have
192.168.1.12    Cleartext-Password := 'cisco'
                Cisco-Service-info = 'QU;1433600000;D;1433600000',
                Cisco-Avpair +=
'subscriber:accounting-list=FRAD_BRAS_ISG_ACCT',
                Cisco-Avpair += 'subscriber:keepalive=interval 10',
                Cisco-Avpair += 'subscriber:idle-timeout-direction=inbound'
and it works, but for ipv6 doesn't

Debug says that radius can't find user :/

(0) Received Access-Request Id 94 from 10.249.1.202:1645 to
10.249.1.203:1912 length 152
(0)   User-Name = "2001:DB8:2:8000::"
(0)   User-Password = "cisco"
(0)   Framed-IPv6-Prefix = 2001:db8:2:8000::/56
(0)   Calling-Station-Id = "00:00:00:00:00:00"
(0)   NAS-Port-Type = PPPoEoE
(0)   NAS-Port = 0
(0)   NAS-Port-Id = "0/0/0/0"
(0)   Service-Type = Outbound-User
(0)   NAS-IP-Address = 10.249.1.202
(0)   Acct-Session-Id = "00001200"
(0)   NAS-Identifier = "ASR_1"
(0)   Event-Timestamp = "Mar 30 2020 09:39:28 CEST"
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/ikam-isg.server
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "2001:DB8:2:8000::", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     redundant {
(0) ikam-isg: EXPAND %{User-Name}
(0) ikam-isg:    --> 2001:DB8:2:8000::
(0) ikam-isg: SQL-User-Name set to '2001:DB8:2:8000::'
rlm_sql (ikam-isg): 0 of 0 connections in use.  You  may need to increase
"spare"
rlm_sql (ikam-isg): Opening additional connection (0), 1 of 64 pending
slots used
rlm_sql_postgresql: Connecting using parameters: dbname=bcman
host=localhost user=bcman password=bcman
rlm_sql_postgresql: Connection failed: could not connect to server:
Connection refused Is the server running on host "localhost" (127.0.0.1)
and accepting TCP/IP connections on port 5432?
rlm_sql_postgresql: Socket destructor called, closing socket
rlm_sql (ikam-isg): Opening connection failed (0)

*(0)       [ikam-isg] = fail(0)       [files] = noop*
(0)     } # redundant = noop
(0)     [expiration] = noop
(0)     [logintime] = noop

*(0) pap: WARNING: No "known good" password found for the user.  Not
setting Auth-Type(0) pap: WARNING: Authentication will fail unless a "known
good" password is available*
(0)     [pap] = noop
(0)   } # authorize = ok

*(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject(0) Failed to authenticate the user*
(0) Using Post-Auth-Type Reject
(0) # Executing group from file
/etc/freeradius/3.0/sites-enabled/ikam-isg.server
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> 2001:DB8:2:8000::
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.6 seconds.
Waking up in 0.3 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 94 from 10.249.1.203:1912 to 10.249.1.202:1645
length 20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 94 with timestamp +6

FreeRADIUS Version 3.0.16

Where I'm doing mistake?

Best regards
Marcin