Configuration issue at radiusd.conf?

[Honglak Kim]

Hello all,
I am very new to FreeRadius and I am not sure why I can't access the network device.It seems something to do with radiusd.conf but I can't identify it.. Please help.
This is the debugging message when I ran the test.

(0) Received Access-Request Id 116 from 10.0.254.3:43509 to 10.192.2.141:1812 length 92
(0)   User-Name = "hong"
(0)   User-Password = "test123!"
(0)   NAS-Port-Id = "ssh"
(0)   Calling-Station-Id = "ops001.mydomain.com"
(0)   Service-Type = NAS-Prompt-User
(0)   NAS-Port = 0
(0)   NAS-IP-Address = 10.0.254.3
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "hong", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0) files: users: Matched entry hong at line 94
(0)     [files] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: Normalizing SHA-Password from hex encoding, 40 bytes -> 20 bytes
(0)     [pap] = updated
(0)   } # authorize = updated
(0) Found Auth-Type = PAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Auth-Type PAP {
(0) pap: Login attempt with password
(0) pap: Comparing with "known-good" SHA-Password
(0) pap: User authenticated successfully
(0)     [pap] = ok
(0)   } # Auth-Type PAP = ok
(0) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(0)   post-auth {
(0)     update reply {
(0)       Juniper-Local-User-Name = "admin"
(0)       Arista-AVPair = "shell:priv-lvl=15"
(0)       Arista-AVPair = "shell:roles=network-admin"
(0)       PaloAlto-Admin-Role = "superuser"
(0)       PaloAlto-Panorama-Admin-Role = "superuser"
(0)       PaloAlto-User-Group = "all"
(0)     } # update reply = noop
(0)     [exec] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # post-auth = noop
(0) Sent Access-Accept Id 116 from 10.192.2.141:1812 to 10.0.254.3:43509 length 0
(0)   Juniper-Local-User-Name = "admin"
(0)   Arista-AVPair = "shell:priv-lvl=15"
(0)   Arista-AVPair = "shell:roles=network-admin"
(0)   PaloAlto-Admin-Role = "superuser"
(0)   PaloAlto-Panorama-Admin-Role = "superuser"
(0)   PaloAlto-User-Group = "all"
(0) Finished request
Waking up in 4.9 seconds.
Waking up in 6.9 seconds.
(0) Cleaning up request packet ID 116 with timestamp +9
Thanks,Paul