Inner-tunnel EAP-TTLS with two radcheck items
Fabricio Viana
fabricioviana at hotmail.com
Thu May 20 16:38:38 CEST 2021
Hello, need some help.
I have one Ubiquiti using EAP-TTLS MSCHAPV2 auth. I´m using username and password. My radcheck table looks like this:
SCENARIO 1:
mysql> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id;
+-------+----------+--------------------+--------+----+
| id | username | attribute | value | op |
+-------+----------+--------------------+--------+----+
| 64446 | mmd13 | Cleartext-Password | qmk65s | := |
+-------+----------+--------------------+--------+----+
1 row in set (0.01 sec)
I have no problem to find Cleartext-Password in MySQL:
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [chap] = noop
(4) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
(4) [mschap] = ok
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "mmd13", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) update control {
(4) &Proxy-To-Realm := LOCAL
(4) } # update control = noop
(4) eap: No EAP-Message, not doing EAP
(4) [eap] = noop
(4) [files] = noop
(4) sql: EXPAND %{User-Name}
(4) sql: --> mmd13
(4) sql: SQL-User-Name set to 'mmd13'
rlm_sql (sql): Reserved connection (5)
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id
(4) sql: User found in radcheck table
(4) sql: Conditional check items matched, merging assignment check items
(4) sql: Cleartext-Password := "qmk65s"
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'mmd13' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'mmd13' ORDER BY id
(4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'mmd13' ORDER BY priority
(4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'mmd13' ORDER BY priority
(4) sql: User found in the group table
(4) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(4) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '105' ORDER BY id
(4) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '105' ORDER BY id
(4) sql: Group "105": Conditional check items matched
(4) sql: Group "105": Merging assignment check items
(4) sql: Simultaneous-Use := 1
(4) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(4) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '105' ORDER BY id
(4) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '105' ORDER BY id
(4) sql: Group "105": Merging reply items
(4) sql: Mikrotik-Rate-Limit = "35840k/71680k 0k/0k 0k/0k 0/0 5 35840k/71680k "
(4) sql: WISPr-Bandwidth-Max-Down = 71680000
(4) sql: WISPr-Bandwidth-Max-Up = 35840000
rlm_sql (sql): Released connection (5)
(4) [sql] = ok
(4) [expiration] = noop
(4) [logintime] = noop
(4) pap: WARNING: Auth-Type already set. Not setting to PAP
(4) [pap] = noop
(4) } # authorize = ok
(4) Found Auth-Type = mschap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) authenticate {
(4) mschap: Found Cleartext-Password, hashing to create NT-Password
(4) mschap: Found Cleartext-Password, hashing to create LM-Password
(4) mschap: Creating challenge hash with username: mmd13
(4) mschap: Client is using MS-CHAPv2
Please note these two lines:
(4) sql: Conditional check items matched, merging assignment check items
(4) sql: Cleartext-Password := "qmk65s"
Then MSCHAP found the Cleartext-Password and there is a ACCEPT.
But I need to use Calling-Station-Id into radcheck. The new scenario:
SCENARIO 2:
mysql> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id;
+-------+----------+--------------------+-------------------+----+
| id | username | attribute | value | op |
+-------+----------+--------------------+-------------------+----+
| 63983 | mmd13 | Calling-Station-Id | 00:27:22:A2:07:C5 | == |
| 64446 | mmd13 | Cleartext-Password | qmk65s | := |
+-------+----------+--------------------+-------------------+----+
2 rows in set (0.00 sec)
Now, with two rows in radcheck, SQL returns different:
(4) Received Access-Request Id 28 from 192.168.1.21:51630 to 172.18.0.1:1812 length 361
(4) User-Name = "anonymous at myisp.com"
(4) NAS-Identifier = "NanoStation loco M5"
(4) Called-Station-Id = "24-A4-3C-88-F3-94:ubntxxx"
(4) NAS-Port-Type = Wireless-802.11
(4) NAS-Port = 0
(4) Calling-Station-Id = "00-27-22-A2-07-C5"
(4) Connect-Info = "CONNECT 0Mbps 802.11b"
(4) Acct-Session-Id = "5B05AE57-00001E37"
(4) Framed-MTU = 1400
(4) EAP-Message = 0x0259009b15001703010090ad86507970ec1f8873ed46c43aa73a782c9f5eb96775deadb32855fd714ee5ebcc7e5f2e073ea7113072c589b3081fc8070ed2cc480a0d53d55e9553cc0df6703ec7467240604695ee9992e44046a88284dd2624b7b328326414d4055494a2f3c198551b9e4edc7efe29975e
(4) State = 0xfee3d417fdbac1f59e169eb3f2762e68
(4) Message-Authenticator = 0x5acd22b6522a9e9abb4b194da86ecd29
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(4) EXPAND %{Cisco-AVPair[*]}
(4) -->
(4) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(4) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(4) ERROR: Failed retrieving values required to evaluate condition
(4) else {
(4) update request {
(4) EXPAND %{toupper:%{Calling-Station-Id}}
(4) --> 00-27-22-A2-07-C5
(4) Calling-Station-Id := 00-27-22-A2-07-C5
(4) } # update request = noop
(4) } # else = noop
(4) if (!control:Cleartext-Password){
(4) if (!control:Cleartext-Password) -> TRUE
(4) (!control:Cleartext-Password) { ... } # empty sub-section is ignored
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) eap: Peer sent EAP Response (code 2) ID 89 length 155
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) sql: EXPAND %{User-Name}
(4) sql: --> anonymous at myisp.com
(4) sql: SQL-User-Name set to 'anonymous at myisp.com'
rlm_sql (sql): Reserved connection (0)
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(4) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
Need 3 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
(4) [sql] = notfound
(4) [pap] = noop
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xfee3d417fdbac1f5
(4) eap: Finished EAP session with state 0xfee3d417fdbac1f5
(4) eap: Previous EAP request found for state 0xfee3d417fdbac1f5, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: [eaptls verify] = ok
(4) eap_ttls: Done initial handshake
(4) eap_ttls: [eaptls process] = ok
(4) eap_ttls: Session established. Proceeding to decode tunneled attributes
(4) eap_ttls: Got tunneled request
(4) eap_ttls: User-Name = "mmd13"
(4) eap_ttls: MS-CHAP-Challenge = 0xa37e37c4f224a5db18cfe440f3fb3e0d
(4) eap_ttls: MS-CHAP2-Response = 0xb300134ddddfb343576a18a0db14877dea13000000000000000079f8618ac9de53a897d7875aefbdcb74c8fcb186761d050c
(4) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
(4) eap_ttls: Sending tunneled request
(4) Virtual server inner-tunnel received request
(4) User-Name = "mmd13"
(4) MS-CHAP-Challenge = 0xa37e37c4f224a5db18cfe440f3fb3e0d
(4) MS-CHAP2-Response = 0xb300134ddddfb343576a18a0db14877dea13000000000000000079f8618ac9de53a897d7875aefbdcb74c8fcb186761d050c
(4) FreeRADIUS-Proxied-To = 127.0.0.1
(4) server inner-tunnel {
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [chap] = noop
(4) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
(4) [mschap] = ok
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "mmd13", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) update control {
(4) &Proxy-To-Realm := LOCAL
(4) } # update control = noop
(4) eap: No EAP-Message, not doing EAP
(4) [eap] = noop
(4) [files] = noop
(4) sql: EXPAND %{User-Name}
(4) sql: --> mmd13
(4) sql: SQL-User-Name set to 'mmd13'
rlm_sql (sql): Reserved connection (5)
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id
(4) sql: User found in radcheck table
(4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'mmd13' ORDER BY priority
(4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'mmd13' ORDER BY priority
(4) sql: User found in the group table
(4) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(4) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '105' ORDER BY id
(4) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '105' ORDER BY id
(4) sql: Group "105": Conditional check items matched
(4) sql: Group "105": Merging assignment check items
(4) sql: Simultaneous-Use := 1
(4) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(4) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '105' ORDER BY id
(4) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '105' ORDER BY id
(4) sql: Group "105": Merging reply items
(4) sql: Mikrotik-Rate-Limit = "35840k/71680k 0k/0k 0k/0k 0/0 5 35840k/71680k "
(4) sql: WISPr-Bandwidth-Max-Down = 71680000
(4) sql: WISPr-Bandwidth-Max-Up = 35840000
rlm_sql (sql): Released connection (5)
(4) [sql] = ok
(4) [expiration] = noop
(4) [logintime] = noop
(4) [pap] = noop
(4) } # authorize = ok
(4) Found Auth-Type = mschap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) authenticate {
(4) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password
(4) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password
(4) mschap: Creating challenge hash with username: mmd13
(4) mschap: Client is using MS-CHAPv2
(4) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(4) mschap: ERROR: MS-CHAP2-Response is incorrect
(4) [mschap] = reject
(4) } # authenticate = reject
I got just "(4) sql: User found in radcheck table" but "Conditional check items matched, merging assignment check items" and "Cleartext-password" are missing.
Since there are no Cleartext-password, MSCHAP fails: "(4) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication".
I really need to have Calling-Station-Id and Cleartext-Password into radcheck table.
Requests 0 to 3 are the same into SCENARIO 1 and 2. The difference is in request 4 only.
It seems to me that MySQl does not see the attribute Cleartext-password when it is accompanied by another attribute.
How do I change this behavior?
Below is the output of the freeradius -X command with the first four packages (SCENARIO 2).
Thank you very much
Regards
Fabricio Viana
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/ddns_exec
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool_v4
including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool_v6
including configuration file /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries_v6.conf
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/accounting
/etc/freeradius/3.0/policy.d/accounting[42]: Reference "${IDRADIUSSERVER}" not found
/etc/freeradius/3.0/policy.d/accounting[54]: Reference "${IDRADIUSSERVER}" not found
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/freeradius.env
including configuration file /etc/freeradius/3.0/ddns.env
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/var/scriptsradius/callcheckrad.sh"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_exec
# Loading module "ddns_del" from file /etc/freeradius/3.0/mods-enabled/ddns_exec
exec ddns_del {
wait = yes
program = "/var/scriptsradius/ddns.php del %{User-Name} %{Framed-IP-Address}"
input_pairs = "request"
shell_escape = no
}
# Loading module "ddns_add" from file /etc/freeradius/3.0/mods-enabled/ddns_exec
exec ddns_add {
wait = yes
program = "/var/scriptsradius/ddns.php add %{User-Name} %{Framed-IP-Address}"
input_pairs = "request"
shell_escape = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôoeùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔOEÙÛÜY"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "192.0.2.2"
port = 3306
login = "radius_user"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= UTC_TIMESTAMP()"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= UTC_TIMESTAMP()"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6prefix, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', UTC_TIMESTAMP(), UTC_TIMESTAMP(), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Prefix}', '%{Delegated-IPv6-Prefix}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = UTC_TIMESTAMP(), acctinterval = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', framedipv6prefix = '%{Framed-IPv6-Prefix}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctstoptime = NULL WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' OR AcctUniqueId = '%{Segundo-AcctUnique-Id}' OR AcctUniqueId = '%{Terceiro-AcctUnique-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{NAS-IP-Address}', '%{Calling-Station-Id}')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_sqlippool
# Loading module "sqlippool" from file /etc/freeradius/3.0/mods-enabled/sqlippool
sqlippool {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = ""
default_pool = "main_pool"
ipv6 = yes
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = "START TRANSACTION"
start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
start_commit = "COMMIT"
alive_begin = "START TRANSACTION"
alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
alive_commit = "COMMIT"
stop_begin = "START TRANSACTION"
stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
stop_commit = "COMMIT"
on_begin = "START TRANSACTION"
on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
on_commit = "COMMIT"
off_begin = "START TRANSACTION"
off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
off_commit = "COMMIT"
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loading module "sqlippool_v4" from file /etc/freeradius/3.0/mods-enabled/sqlippool_v4
sqlippool sqlippool_v4 {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = ""
default_pool = "main_pool"
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = "START TRANSACTION"
start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
start_commit = "COMMIT"
alive_begin = "START TRANSACTION"
alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
alive_commit = "COMMIT"
stop_begin = "START TRANSACTION"
stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
stop_commit = "COMMIT"
on_begin = "START TRANSACTION"
on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
on_commit = "COMMIT"
off_begin = "START TRANSACTION"
off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
off_commit = "COMMIT"
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loading module "sqlippool_v6" from file /etc/freeradius/3.0/mods-enabled/sqlippool_v6
sqlippool sqlippool_v6 {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = ""
default_pool = "main_pool"
ipv6 = yes
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
allocate_find = "SELECT framedipaddress FROM radippoolv6 WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippoolv6 SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippoolv6 WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = "START TRANSACTION"
start_update = "UPDATE radippoolv6 SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'"
start_commit = "COMMIT"
alive_begin = "START TRANSACTION"
alive_update = "UPDATE radippoolv6 SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'"
alive_commit = "COMMIT"
stop_begin = "START TRANSACTION"
stop_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'"
stop_commit = "COMMIT"
on_begin = "START TRANSACTION"
on_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
on_commit = "COMMIT"
off_begin = "START TRANSACTION"
off_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
off_commit = "COMMIT"
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
instantiate {
}
# Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.7.25
mysql {
tls {
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 172.18.0.2 (teste) to global clients list
rlm_sql (172.18.0.2): Client "teste" (sql) added
rlm_sql (sql): Adding client 192.168.1.21 (radio) to global clients list
rlm_sql (192.168.1.21): Client "radio" (sql) added
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
# Instantiating module "sqlippool" from file /etc/freeradius/3.0/mods-enabled/sqlippool
# Instantiating module "sqlippool_v4" from file /etc/freeradius/3.0/mods-enabled/sqlippool_v4
# Instantiating module "sqlippool_v6" from file /etc/freeradius/3.0/mods-enabled/sqlippool_v6
# Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 51633
Listening on proxy address :: port 34439
Ready to process requests
(0) Received Access-Request Id 24 from 192.168.1.21:51630 to 172.18.0.1:1812 length 212
(0) User-Name = "anonymous at myisp.com"
(0) NAS-Identifier = "NanoStation loco M5"
(0) Called-Station-Id = "24-A4-3C-88-F3-94:ubntxxx"
(0) NAS-Port-Type = Wireless-802.11
(0) NAS-Port = 0
(0) Calling-Station-Id = "00-27-22-A2-07-C5"
(0) Connect-Info = "CONNECT 0Mbps 802.11b"
(0) Acct-Session-Id = "5B05AE57-00001E37"
(0) Framed-MTU = 1400
(0) EAP-Message = 0x0255001801616e6f6e796d6f7573406d796973702e636f6d
(0) Message-Authenticator = 0xd882609ef53a3a6c32afb21915dfc072
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(0) EXPAND %{Cisco-AVPair[*]}
(0) -->
(0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(0) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(0) ERROR: Failed retrieving values required to evaluate condition
(0) else {
(0) update request {
(0) EXPAND %{toupper:%{Calling-Station-Id}}
(0) --> 00-27-22-A2-07-C5
(0) Calling-Station-Id := 00-27-22-A2-07-C5
(0) } # update request = noop
(0) } # else = noop
(0) if (!control:Cleartext-Password){
(0) if (!control:Cleartext-Password) -> TRUE
(0) (!control:Cleartext-Password) { ... } # empty sub-section is ignored
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) eap: Peer sent EAP Response (code 2) ID 85 length 24
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) sql: EXPAND %{User-Name}
(0) sql: --> anonymous at myisp.com
(0) sql: SQL-User-Name set to 'anonymous at myisp.com'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(0) sql: User not found in any groups
rlm_sql (sql): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
(0) [sql] = notfound
(0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password is available
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 86 length 22
(0) eap: EAP session adding &reply:State = 0xfee3d417feb5d0f5
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Sent Access-Challenge Id 24 from 172.18.0.1:1812 to 192.168.1.21:51630 length 0
(0) EAP-Message = 0x0156001604103959bae31c3ad8c88e8161aca2f9895a
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xfee3d417feb5d0f59e169eb3f2762e68
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 25 from 192.168.1.21:51630 to 172.18.0.1:1812 length 212
(1) User-Name = "anonymous at myisp.com"
(1) NAS-Identifier = "NanoStation loco M5"
(1) Called-Station-Id = "24-A4-3C-88-F3-94:ubntxxx"
(1) NAS-Port-Type = Wireless-802.11
(1) NAS-Port = 0
(1) Calling-Station-Id = "00-27-22-A2-07-C5"
(1) Connect-Info = "CONNECT 0Mbps 802.11b"
(1) Acct-Session-Id = "5B05AE57-00001E37"
(1) Framed-MTU = 1400
(1) EAP-Message = 0x025600060315
(1) State = 0xfee3d417feb5d0f59e169eb3f2762e68
(1) Message-Authenticator = 0xebeac517405cf78a9d8e9e78deaf7759
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(1) EXPAND %{Cisco-AVPair[*]}
(1) -->
(1) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(1) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(1) ERROR: Failed retrieving values required to evaluate condition
(1) else {
(1) update request {
(1) EXPAND %{toupper:%{Calling-Station-Id}}
(1) --> 00-27-22-A2-07-C5
(1) Calling-Station-Id := 00-27-22-A2-07-C5
(1) } # update request = noop
(1) } # else = noop
(1) if (!control:Cleartext-Password){
(1) if (!control:Cleartext-Password) -> TRUE
(1) (!control:Cleartext-Password) { ... } # empty sub-section is ignored
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) eap: Peer sent EAP Response (code 2) ID 86 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) sql: EXPAND %{User-Name}
(1) sql: --> anonymous at myisp.com
(1) sql: SQL-User-Name set to 'anonymous at myisp.com'
rlm_sql (sql): Reserved connection (2)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (2)
(1) [sql] = notfound
(1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password is available
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xfee3d417feb5d0f5
(1) eap: Finished EAP session with state 0xfee3d417feb5d0f5
(1) eap: Previous EAP request found for state 0xfee3d417feb5d0f5, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Initiating new EAP-TLS session
(1) eap_ttls: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 87 length 6
(1) eap: EAP session adding &reply:State = 0xfee3d417ffb4c1f5
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Sent Access-Challenge Id 25 from 172.18.0.1:1812 to 192.168.1.21:51630 length 0
(1) EAP-Message = 0x015700061520
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xfee3d417ffb4c1f59e169eb3f2762e68
(1) Finished request
Waking up in 4.8 seconds.
(2) Received Access-Request Id 26 from 192.168.1.21:51630 to 172.18.0.1:1812 length 274
(2) User-Name = "anonymous at myisp.com"
(2) NAS-Identifier = "NanoStation loco M5"
(2) Called-Station-Id = "24-A4-3C-88-F3-94:ubntxxx"
(2) NAS-Port-Type = Wireless-802.11
(2) NAS-Port = 0
(2) Calling-Station-Id = "00-27-22-A2-07-C5"
(2) Connect-Info = "CONNECT 0Mbps 802.11b"
(2) Acct-Session-Id = "5B05AE57-00001E37"
(2) Framed-MTU = 1400
(2) EAP-Message = 0x02570044150016030100390100003503015b06a5552d61e921482136f319e46b1b0c351aacfda8ba971a4c94c17466a0ba00000e003d0035003c002f000a000500040100
(2) State = 0xfee3d417ffb4c1f59e169eb3f2762e68
(2) Message-Authenticator = 0xec2de8307b1a35a8a71d04903e4b656a
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(2) EXPAND %{Cisco-AVPair[*]}
(2) -->
(2) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(2) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(2) ERROR: Failed retrieving values required to evaluate condition
(2) else {
(2) update request {
(2) EXPAND %{toupper:%{Calling-Station-Id}}
(2) --> 00-27-22-A2-07-C5
(2) Calling-Station-Id := 00-27-22-A2-07-C5
(2) } # update request = noop
(2) } # else = noop
(2) if (!control:Cleartext-Password){
(2) if (!control:Cleartext-Password) -> TRUE
(2) (!control:Cleartext-Password) { ... } # empty sub-section is ignored
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) eap: Peer sent EAP Response (code 2) ID 87 length 68
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) sql: EXPAND %{User-Name}
(2) sql: --> anonymous at myisp.com
(2) sql: SQL-User-Name set to 'anonymous at myisp.com'
rlm_sql (sql): Reserved connection (3)
(2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(2) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(2) sql: --> SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(2) sql: User not found in any groups
rlm_sql (sql): Released connection (3)
(2) [sql] = notfound
(2) [pap] = noop
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xfee3d417ffb4c1f5
(2) eap: Finished EAP session with state 0xfee3d417ffb4c1f5
(2) eap: Previous EAP request found for state 0xfee3d417ffb4c1f5, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: [eaptls verify] = ok
(2) eap_ttls: Done initial handshake
(2) eap_ttls: (other): before SSL initialization
(2) eap_ttls: TLS_accept: before SSL initialization
(2) eap_ttls: TLS_accept: before SSL initialization
(2) eap_ttls: <<< recv TLS 1.2 [length 0039]
(2) eap_ttls: TLS_accept: SSLv3/TLS read client hello
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 002a], ServerHello
(2) eap_ttls: TLS_accept: SSLv3/TLS write server hello
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 02e5], Certificate
(2) eap_ttls: TLS_accept: SSLv3/TLS write certificate
(2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_ttls: TLS_accept: SSLv3/TLS write server done
(2) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(2) eap_ttls: In SSL Handshake Phase
(2) eap_ttls: In SSL Accept mode
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 88 length 812
(2) eap: EAP session adding &reply:State = 0xfee3d417fcbbc1f5
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Sent Access-Challenge Id 26 from 172.18.0.1:1812 to 192.168.1.21:51630 length 0
(2) EAP-Message = 0x0158032c158000000322160301002a0200002603012795f32c0527049fd37b3a15556d59374531a84298ffeb5b3318d7ec4d4997630000350016030102e50b0002e10002de0002db308202d7308201bfa003020102020900bcde151bf742f509300d06092a864886f70d01010b05003017311530130603
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xfee3d417fcbbc1f59e169eb3f2762e68
(2) Finished request
Waking up in 4.6 seconds.
(3) Received Access-Request Id 27 from 192.168.1.21:51630 to 172.18.0.1:1812 length 540
(3) User-Name = "anonymous at myisp.com"
(3) NAS-Identifier = "NanoStation loco M5"
(3) Called-Station-Id = "24-A4-3C-88-F3-94:ubntxxx"
(3) NAS-Port-Type = Wireless-802.11
(3) NAS-Port = 0
(3) Calling-Station-Id = "00-27-22-A2-07-C5"
(3) Connect-Info = "CONNECT 0Mbps 802.11b"
(3) Acct-Session-Id = "5B05AE57-00001E37"
(3) Framed-MTU = 1400
(3) EAP-Message = 0x0258014c1500160301010610000102010068ca25a16af516561f95f2b966452099afdd99e736a185c4991a9e1a5412e3b2d234d1fda8ceec7d4bbb688eda83c5ec048360f234ec7ea0522548fafe71b7b648f45b30ea887f4004ab623115251df3cea9ee3bb81eeb5a9f870046ae74410df5fa6778b763
(3) State = 0xfee3d417fcbbc1f59e169eb3f2762e68
(3) Message-Authenticator = 0x2ea9059ed724879594a39da4565a8a8d
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(3) EXPAND %{Cisco-AVPair[*]}
(3) -->
(3) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(3) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(3) ERROR: Failed retrieving values required to evaluate condition
(3) else {
(3) update request {
(3) EXPAND %{toupper:%{Calling-Station-Id}}
(3) --> 00-27-22-A2-07-C5
(3) Calling-Station-Id := 00-27-22-A2-07-C5
(3) } # update request = noop
(3) } # else = noop
(3) if (!control:Cleartext-Password){
(3) if (!control:Cleartext-Password) -> TRUE
(3) (!control:Cleartext-Password) { ... } # empty sub-section is ignored
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) eap: Peer sent EAP Response (code 2) ID 88 length 332
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) sql: EXPAND %{User-Name}
(3) sql: --> anonymous at myisp.com
(3) sql: SQL-User-Name set to 'anonymous at myisp.com'
rlm_sql (sql): Reserved connection (4)
(3) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(3) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(3) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(3) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(3) sql: --> SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(3) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(3) sql: User not found in any groups
rlm_sql (sql): Released connection (4)
(3) [sql] = notfound
(3) [pap] = noop
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xfee3d417fcbbc1f5
(3) eap: Finished EAP session with state 0xfee3d417fcbbc1f5
(3) eap: Previous EAP request found for state 0xfee3d417fcbbc1f5, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: [eaptls verify] = ok
(3) eap_ttls: Done initial handshake
(3) eap_ttls: TLS_accept: SSLv3/TLS write server done
(3) eap_ttls: <<< recv TLS 1.0 Handshake [length 0106], ClientKeyExchange
(3) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange
(3) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec
(3) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished
(3) eap_ttls: TLS_accept: SSLv3/TLS read finished
(3) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(3) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec
(3) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished
(3) eap_ttls: TLS_accept: SSLv3/TLS write finished
(3) eap_ttls: (other): SSL negotiation finished successfully
(3) eap_ttls: SSL Connection Established
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 89 length 69
(3) eap: EAP session adding &reply:State = 0xfee3d417fdbac1f5
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Sent Access-Challenge Id 27 from 172.18.0.1:1812 to 192.168.1.21:51630 length 0
(3) EAP-Message = 0x0159004515800000003b1403010001011603010030cd896000d31f05321d53db841d2ce9c057def717303b55ec79a61972cee9ef9b5a47c6abdbdcab2242e055fc913c88d2
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xfee3d417fdbac1f59e169eb3f2762e68
(3) Finished request
Waking up in 4.3 seconds.
(4) Received Access-Request Id 28 from 192.168.1.21:51630 to 172.18.0.1:1812 length 361
(4) User-Name = "anonymous at myisp.com"
(4) NAS-Identifier = "NanoStation loco M5"
(4) Called-Station-Id = "24-A4-3C-88-F3-94:ubntxxx"
(4) NAS-Port-Type = Wireless-802.11
(4) NAS-Port = 0
(4) Calling-Station-Id = "00-27-22-A2-07-C5"
(4) Connect-Info = "CONNECT 0Mbps 802.11b"
(4) Acct-Session-Id = "5B05AE57-00001E37"
(4) Framed-MTU = 1400
(4) EAP-Message = 0x0259009b15001703010090ad86507970ec1f8873ed46c43aa73a782c9f5eb96775deadb32855fd714ee5ebcc7e5f2e073ea7113072c589b3081fc8070ed2cc480a0d53d55e9553cc0df6703ec7467240604695ee9992e44046a88284dd2624b7b328326414d4055494a2f3c198551b9e4edc7efe29975e
(4) State = 0xfee3d417fdbac1f59e169eb3f2762e68
(4) Message-Authenticator = 0x5acd22b6522a9e9abb4b194da86ecd29
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(4) EXPAND %{Cisco-AVPair[*]}
(4) -->
(4) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(4) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(4) ERROR: Failed retrieving values required to evaluate condition
(4) else {
(4) update request {
(4) EXPAND %{toupper:%{Calling-Station-Id}}
(4) --> 00-27-22-A2-07-C5
(4) Calling-Station-Id := 00-27-22-A2-07-C5
(4) } # update request = noop
(4) } # else = noop
(4) if (!control:Cleartext-Password){
(4) if (!control:Cleartext-Password) -> TRUE
(4) (!control:Cleartext-Password) { ... } # empty sub-section is ignored
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) eap: Peer sent EAP Response (code 2) ID 89 length 155
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) sql: EXPAND %{User-Name}
(4) sql: --> anonymous at myisp.com
(4) sql: SQL-User-Name set to 'anonymous at myisp.com'
rlm_sql (sql): Reserved connection (0)
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'anonymous at myisp.com' ORDER BY id
(4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'anonymous at myisp.com' ORDER BY priority
(4) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
Need 3 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
(4) [sql] = notfound
(4) [pap] = noop
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xfee3d417fdbac1f5
(4) eap: Finished EAP session with state 0xfee3d417fdbac1f5
(4) eap: Previous EAP request found for state 0xfee3d417fdbac1f5, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: [eaptls verify] = ok
(4) eap_ttls: Done initial handshake
(4) eap_ttls: [eaptls process] = ok
(4) eap_ttls: Session established. Proceeding to decode tunneled attributes
(4) eap_ttls: Got tunneled request
(4) eap_ttls: User-Name = "mmd13"
(4) eap_ttls: MS-CHAP-Challenge = 0xa37e37c4f224a5db18cfe440f3fb3e0d
(4) eap_ttls: MS-CHAP2-Response = 0xb300134ddddfb343576a18a0db14877dea13000000000000000079f8618ac9de53a897d7875aefbdcb74c8fcb186761d050c
(4) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
(4) eap_ttls: Sending tunneled request
(4) Virtual server inner-tunnel received request
(4) User-Name = "mmd13"
(4) MS-CHAP-Challenge = 0xa37e37c4f224a5db18cfe440f3fb3e0d
(4) MS-CHAP2-Response = 0xb300134ddddfb343576a18a0db14877dea13000000000000000079f8618ac9de53a897d7875aefbdcb74c8fcb186761d050c
(4) FreeRADIUS-Proxied-To = 127.0.0.1
(4) server inner-tunnel {
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [chap] = noop
(4) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
(4) [mschap] = ok
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "mmd13", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) update control {
(4) &Proxy-To-Realm := LOCAL
(4) } # update control = noop
(4) eap: No EAP-Message, not doing EAP
(4) [eap] = noop
(4) [files] = noop
(4) sql: EXPAND %{User-Name}
(4) sql: --> mmd13
(4) sql: SQL-User-Name set to 'mmd13'
rlm_sql (sql): Reserved connection (5)
(4) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(4) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id
(4) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'mmd13' ORDER BY id
(4) sql: User found in radcheck table
(4) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(4) sql: --> SELECT groupname FROM radusergroup WHERE username = 'mmd13' ORDER BY priority
(4) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'mmd13' ORDER BY priority
(4) sql: User found in the group table
(4) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(4) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '105' ORDER BY id
(4) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '105' ORDER BY id
(4) sql: Group "105": Conditional check items matched
(4) sql: Group "105": Merging assignment check items
(4) sql: Simultaneous-Use := 1
(4) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(4) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '105' ORDER BY id
(4) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '105' ORDER BY id
(4) sql: Group "105": Merging reply items
(4) sql: Mikrotik-Rate-Limit = "35840k/71680k 0k/0k 0k/0k 0/0 5 35840k/71680k "
(4) sql: WISPr-Bandwidth-Max-Down = 71680000
(4) sql: WISPr-Bandwidth-Max-Up = 35840000
rlm_sql (sql): Released connection (5)
(4) [sql] = ok
(4) [expiration] = noop
(4) [logintime] = noop
(4) [pap] = noop
(4) } # authorize = ok
(4) Found Auth-Type = mschap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) authenticate {
(4) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password
(4) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password
(4) mschap: Creating challenge hash with username: mmd13
(4) mschap: Client is using MS-CHAPv2
(4) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(4) mschap: ERROR: MS-CHAP2-Response is incorrect
(4) [mschap] = reject
(4) } # authenticate = reject
(4) Failed to authenticate the user
(4) Using Post-Auth-Type Reject
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4) Post-Auth-Type REJECT {
(4) sql: EXPAND .query
(4) sql: --> .query
(4) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (1)
(4) sql: EXPAND %{User-Name}
(4) sql: --> mmd13
(4) sql: SQL-User-Name set to 'mmd13'
(4) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{NAS-IP-Address}', '%{Calling-Station-Id}')
(4) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'mmd13', '', 'Access-Reject', UTC_TIMESTAMP(), '', '')
(4) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'mmd13', '', 'Access-Reject', UTC_TIMESTAMP(), '', '')
(4) sql: SQL query returned: success
(4) sql: 1 record(s) updated
rlm_sql (sql): Released connection (1)
(4) [sql] = ok
(4) attr_filter.access_reject: EXPAND %{User-Name}
(4) attr_filter.access_reject: --> mmd13
(4) attr_filter.access_reject: Matched entry DEFAULT at line 11
(4) [attr_filter.access_reject] = updated
(4) update outer.session-state {
(4) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication'
(4) } # update outer.session-state = noop
(4) } # Post-Auth-Type REJECT = updated
(4) } # server inner-tunnel
(4) Virtual server sending reply
(4) MS-CHAP-Error = "\263E=691 R=1 C=3e0e75d6ae9bd3607f8fa1bb71a1ef9e V=3 M=Authentication rejected"
(4) eap_ttls: Got tunneled Access-Reject
(4) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed
(4) eap: Sending EAP Failure (code 4) ID 89 length 4
(4) eap: Failed in EAP select
(4) [eap] = invalid
(4) } # authenticate = invalid
(4) Failed to authenticate the user
(4) Using Post-Auth-Type Reject
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Post-Auth-Type REJECT {
(4) sql: EXPAND .query
(4) sql: --> .query
(4) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (6)
(4) sql: EXPAND %{User-Name}
(4) sql: --> anonymous at myisp.com
(4) sql: SQL-User-Name set to 'anonymous at myisp.com'
(4) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{NAS-IP-Address}', '%{Calling-Station-Id}')
(4) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'anonymous at myisp.com', '', 'Access-Reject', UTC_TIMESTAMP(), '192.168.1.21', '00-27-22-A2-07-C5')
(4) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'anonymous at myisp.com', '', 'Access-Reject', UTC_TIMESTAMP(), '192.168.1.21', '00-27-22-A2-07-C5')
(4) sql: SQL query returned: success
(4) sql: 1 record(s) updated
rlm_sql (sql): Released connection (6)
(4) [sql] = ok
(4) attr_filter.access_reject: EXPAND %{User-Name}
(4) attr_filter.access_reject: --> anonymous at myisp.com
(4) attr_filter.access_reject: Matched entry DEFAULT at line 11
(4) [attr_filter.access_reject] = updated
(4) [eap] = noop
(4) policy remove_reply_message_if_eap {
(4) if (&reply:EAP-Message && &reply:Reply-Message) {
(4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(4) else {
(4) [noop] = noop
(4) } # else = noop
(4) } # policy remove_reply_message_if_eap = noop
(4) } # Post-Auth-Type REJECT = updated
(4) Delaying response for 1.000000 seconds
Waking up in 0.2 seconds.
Waking up in 0.7 seconds.
(4) Sending delayed response
(4) Sent Access-Reject Id 28 from 172.18.0.1:1812 to 192.168.1.21:51630 length 44
(4) EAP-Message = 0x04590004
(4) Message-Authenticator = 0x00000000000000000000000000000000
More information about the Freeradius-Users
mailing list