rad_recv: Access-Request packet from host 172.18.251.101:20455, id=13, length=157
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020a001301434852545c6a706272756e61696e
	Message-Authenticator = 0xc7366f11cef5ff3477a0b52e2bf1b9bf
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 9
  rlm_eap: EAP packet type response id 10 length 19
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 9
modcall: leaving group authorize (returns updated) for request 9
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 9
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 9
modcall: leaving group authenticate (returns handled) for request 9
Sending Access-Challenge of id 13 to 172.18.251.101 port 20455
	EAP-Message = 0x010b00061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xe4f6154c4a3c46701a092952d021ef82
Finished request 9
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20456, id=14, length=236
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0xe4f6154c4a3c46701a092952d021ef82
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020b005019800000004616030100410100003d030144294391e4b90042d8267e308d211edaacb81edba9e9d006c990fbb5688a87ae00001600040005000a000900640062000300060013001200630100
	Message-Authenticator = 0x81443eb638857b7d502e43b65585e85e
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 10
  rlm_eap: EAP packet type response id 11 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 10
modcall: leaving group authorize (returns updated) for request 10
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 10
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
    (other): before/accept initialization 
    TLS_accept: before/accept initialization 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello  
    TLS_accept: SSLv3 read client hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello  
    TLS_accept: SSLv3 write server hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0652], Certificate  
    TLS_accept: SSLv3 write certificate A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
    TLS_accept: SSLv3 write server done A 
    TLS_accept: SSLv3 flush data 
    TLS_accept:error in SSLv3 read client certificate A 
In SSL Handshake Phase 
In SSL Accept mode  
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 10
modcall: leaving group authenticate (returns handled) for request 10
Sending Access-Challenge of id 14 to 172.18.251.101 port 20456
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 496 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x71e011a08cc827f9fb83ce4e2c6c0fa6
Finished request 10
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20457, id=15, length=162
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x71e011a08cc827f9fb83ce4e2c6c0fa6
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020c00061900
	Message-Authenticator = 0x414515df20242ea5466fb3e69f60830b
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 11
  rlm_eap: EAP packet type response id 12 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 11
modcall: leaving group authorize (returns updated) for request 11
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 11
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 11
modcall: leaving group authenticate (returns handled) for request 11
Sending Access-Challenge of id 15 to 172.18.251.101 port 20457
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 432 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x22e8cc4cb36b4b466039f940c1949a64
Finished request 11
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20458, id=16, length=348
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x22e8cc4cb36b4b466039f940c1949a64
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 386 characters]
	Message-Authenticator = 0x2f8f571838c46c8e220f8c427bb62d61
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 12
  rlm_eap: EAP packet type response id 13 length 192
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 12
modcall: leaving group authorize (returns updated) for request 12
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 12
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
    TLS_accept: SSLv3 read client key exchange A 
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]  
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 read finished A 
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]  
    TLS_accept: SSLv3 write change cipher spec A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 write finished A 
    TLS_accept: SSLv3 flush data 
    (other): SSL negotiation finished successfully 
SSL Connection Established 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 12
modcall: leaving group authenticate (returns handled) for request 12
Sending Access-Challenge of id 16 to 172.18.251.101 port 20458
	EAP-Message = 0x010e003119001403010001011603010020538b404830b7626241e73023c3481089bcb745935e1a87d70a07306ee4ef5b5f
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x922d6bc463165090d03b4ebb3a04c243
Finished request 12
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20459, id=17, length=162
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x922d6bc463165090d03b4ebb3a04c243
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020e00061900
	Message-Authenticator = 0x0363020fb7079adf3733134cd56780b0
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 13
  rlm_eap: EAP packet type response id 14 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 13
modcall: leaving group authorize (returns updated) for request 13
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 13
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3 
  eaptls_process returned 3 
  rlm_eap_peap: EAPTLS_SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 13
modcall: leaving group authenticate (returns handled) for request 13
Sending Access-Challenge of id 17 to 172.18.251.101 port 20459
	EAP-Message = 0x010f002019001703010015b9c346ac5589ce348dc831b3045da67715f06e116d
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x80d26d2b5771117f089d50dbd0c186a7
Finished request 13
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20460, id=18, length=198
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x80d26d2b5771117f089d50dbd0c186a7
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020f002a1900170301001f2a0d362ea93bcf666c36de8e81ef412ca4291ac21d909692799fbee14f769d
	Message-Authenticator = 0xce8f4d77be356287f155846ab659406d
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 14
  rlm_eap: EAP packet type response id 15 length 42
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 14
modcall: leaving group authorize (returns updated) for request 14
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 14
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Identity - CHRT\jpbrunain
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled identity of CHRT\jpbrunain
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to CHRT\jpbrunain
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 14
  rlm_eap: EAP packet type response id 15 length 19
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 14
modcall: leaving group authorize (returns updated) for request 14
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 14
  rlm_eap: EAP Identity
  rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 14
modcall: leaving group authenticate (returns handled) for request 14
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 14
modcall: leaving group authenticate (returns handled) for request 14
Sending Access-Challenge of id 18 to 172.18.251.101 port 20460
	EAP-Message = 0x0110003f19001703010034f161b5d813faa4725b1c6ec2bd3c43f8c12464b5e04a1006d8867596d879df1ab2967449bc0acd071f366b794c6e7c0791bc46be
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x852c958213278c063a659f68a55c7088
Finished request 14
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20461, id=19, length=252
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x852c958213278c063a659f68a55c7088
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x02100060190017030100553d1214b66fde907d54fdb5704e84a60f00090bd0ef2890fa62421ca3734188f9ace62392b8ecefa5b39e1987411025b16cd1ab1a24afcc40447dc82ab09744f230c8ed8d7be905d26fcb08d7fb57fccdc4c383f1ec
	Message-Authenticator = 0x414433b19a8188e7f32a13f5a43fb8b6
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 15
  rlm_eap: EAP packet type response id 16 length 96
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 15
modcall: leaving group authorize (returns updated) for request 15
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 15
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Setting User-Name to CHRT\jpbrunain
  PEAP: Adding old state with 3f ca
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 15
  rlm_eap: EAP packet type response id 16 length 73
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 15
modcall: leaving group authorize (returns updated) for request 15
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 15
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 15
  rlm_mschap: No User-Password configured.  Cannot create LM-Password.
  rlm_mschap: No User-Password configured.  Cannot create NT-Password.
  rlm_mschap: NT Domain delimeter found, should we have enabled with_ntdomain_hack?
  rlm_mschap: Told to do MS-CHAPv2 for CHRT\jpbrunain with NT-Password
radius_xlat: Running registered xlat function of module mschap for string 'User-Name'
radius_xlat: Running registered xlat function of module mschap for string 'NT-Domain'
radius_xlat: Running registered xlat function of module mschap for string 'Challenge'
 mschap2: 03
  rlm_mschap: NT Domain delimeter found, should we have enabled with_ntdomain_hack?
radius_xlat: Running registered xlat function of module mschap for string 'NT-Response'
radius_xlat:  '/usr/local/bin/ntlm_auth --request-nt-key --username=jpbrunain --domain=CHRT --challenge=d8a9272386722a12 --nt-response=db063bdf850cff582568f32a83da83315bac0a1c2adc19a2'
Exec-Program: /usr/local/bin/ntlm_auth --request-nt-key --username=jpbrunain --domain=CHRT --challenge=d8a9272386722a12 --nt-response=db063bdf850cff582568f32a83da83315bac0a1c2adc19a2
Exec-Program output: Logon failure (0xc000006d) 
Exec-Program-Wait: plaintext: Logon failure (0xc000006d) 
Exec-Program: returned: 1
  rlm_mschap: External script failed.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
  modcall[authenticate]: module "mschap" returns reject for request 15
modcall: leaving group MS-CHAP (returns reject) for request 15
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns reject for request 15
modcall: leaving group authenticate (returns reject) for request 15
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client localhost port 0)
  PEAP: Tunneled authentication was rejected.
  rlm_eap_peap: FAILURE
  modcall[authenticate]: module "eap" returns handled for request 15
modcall: leaving group authenticate (returns handled) for request 15
Sending Access-Challenge of id 19 to 172.18.251.101 port 20461
	EAP-Message = 0x011100261900170301001bae6c352b3d9c79275a20cddcf2e57dee34c7c51f06104bb90f377c
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x3aacd993356b12d976db330a090b4527
Finished request 15
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20462, id=20, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x3aacd993356b12d976db330a090b4527
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021100261900170301001b808735cc8582e876059ea1ecd775fa0310df9eedc79b92fce15624
	Message-Authenticator = 0xa3ce528c6e968f3fc23d4c087dc52c30
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 16
  rlm_eap: EAP packet type response id 17 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 16
modcall: leaving group authorize (returns updated) for request 16
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 16
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure, rejecting.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 16
modcall: leaving group authenticate (returns invalid) for request 16
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 16 for 1 seconds
Finished request 16
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20463, id=20, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x3aacd993356b12d976db330a090b4527
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021100261900170301001b808735cc8582e876059ea1ecd775fa0310df9eedc79b92fce15624
	Message-Authenticator = 0xa3ce528c6e968f3fc23d4c087dc52c30
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 17
  rlm_eap: EAP packet type response id 17 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 17
modcall: leaving group authorize (returns updated) for request 17
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 17
  rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 17
modcall: leaving group authenticate (returns invalid) for request 17
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 17 for 1 seconds
Finished request 17
Going to the next request
--- Walking the entire request list ---
Sending Access-Reject of id 20 to 172.18.251.101 port 20462
	EAP-Message = 0x04110004
	Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 20 to 172.18.251.101 port 20463
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20464, id=20, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x3aacd993356b12d976db330a090b4527
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021100261900170301001b808735cc8582e876059ea1ecd775fa0310df9eedc79b92fce15624
	Message-Authenticator = 0xa3ce528c6e968f3fc23d4c087dc52c30
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 18
  rlm_eap: EAP packet type response id 17 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 18
modcall: leaving group authorize (returns updated) for request 18
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 18
  rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 18
modcall: leaving group authenticate (returns invalid) for request 18
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 18 for 1 seconds
Finished request 18
Going to the next request
Cleaning up request 9 ID 13 with timestamp 442943d7
Cleaning up request 10 ID 14 with timestamp 442943d7
Cleaning up request 11 ID 15 with timestamp 442943d7
Cleaning up request 12 ID 16 with timestamp 442943d7
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 13 ID 17 with timestamp 442943d8
Cleaning up request 14 ID 18 with timestamp 442943d8
Cleaning up request 15 ID 19 with timestamp 442943d8
Cleaning up request 16 ID 20 with timestamp 442943d8
Sending Access-Reject of id 20 to 172.18.251.101 port 20464
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 17 ID 20 with timestamp 442943da
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20465, id=21, length=157
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0212001301434852545c6a706272756e61696e
	Message-Authenticator = 0x103c1d9b52a3f14e61de997e0575d2bb
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 19
  rlm_eap: EAP packet type response id 18 length 19
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 19
modcall: leaving group authorize (returns updated) for request 19
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 19
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 19
modcall: leaving group authenticate (returns handled) for request 19
Sending Access-Challenge of id 21 to 172.18.251.101 port 20465
	EAP-Message = 0x011300061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x7cb6dc3577c9b15dff7c266ae6cbb50f
Finished request 19
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20466, id=22, length=268
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x7cb6dc3577c9b15dff7c266ae6cbb50f
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 226 characters]
	Message-Authenticator = 0x9515f46c42517aeeb8150569aac6d49f
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 20
  rlm_eap: EAP packet type response id 19 length 112
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 20
modcall: leaving group authorize (returns updated) for request 20
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 20
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
    (other): before/accept initialization 
    TLS_accept: before/accept initialization 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello  
    TLS_accept: SSLv3 read client hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello  
    TLS_accept: SSLv3 write server hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0652], Certificate  
    TLS_accept: SSLv3 write certificate A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
    TLS_accept: SSLv3 write server done A 
    TLS_accept: SSLv3 flush data 
    TLS_accept:error in SSLv3 read client certificate A 
In SSL Handshake Phase 
In SSL Accept mode  
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 20
modcall: leaving group authenticate (returns handled) for request 20
Sending Access-Challenge of id 22 to 172.18.251.101 port 20466
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 496 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xfbea7da3a4587e91b468a709f3f2007c
Finished request 20
Going to the next request
Cleaning up request 18 ID 20 with timestamp 442943dc
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20467, id=23, length=162
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0xfbea7da3a4587e91b468a709f3f2007c
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021400061900
	Message-Authenticator = 0xd5a7d0d0c5e010ad6c4cfc4dabcb6da6
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 21
  rlm_eap: EAP packet type response id 20 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 21
modcall: leaving group authorize (returns updated) for request 21
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 21
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 21
modcall: leaving group authenticate (returns handled) for request 21
Sending Access-Challenge of id 23 to 172.18.251.101 port 20467
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 432 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xd9f07414fa772228cad6a9d7d2bc2de5
Finished request 21
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20468, id=24, length=348
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0xd9f07414fa772228cad6a9d7d2bc2de5
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 386 characters]
	Message-Authenticator = 0x31ac3dcc6cd07a2059b19089f1d7a619
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 22
  rlm_eap: EAP packet type response id 21 length 192
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 22
modcall: leaving group authorize (returns updated) for request 22
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 22
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
    TLS_accept: SSLv3 read client key exchange A 
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]  
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 read finished A 
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]  
    TLS_accept: SSLv3 write change cipher spec A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 write finished A 
    TLS_accept: SSLv3 flush data 
    (other): SSL negotiation finished successfully 
SSL Connection Established 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 22
modcall: leaving group authenticate (returns handled) for request 22
Sending Access-Challenge of id 24 to 172.18.251.101 port 20468
	EAP-Message = 0x0116003119001403010001011603010020216a2fa917c56880e9d8bfb3ae50ff7a19c40bbed89bf78631000c061356b06a
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xe23dfb3b27929274e85f3a7e6d9cfe28
Finished request 22
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20469, id=25, length=162
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0xe23dfb3b27929274e85f3a7e6d9cfe28
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021600061900
	Message-Authenticator = 0xd855b1a4ed2987ead99e79efd43279bc
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 23
  rlm_eap: EAP packet type response id 22 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 23
modcall: leaving group authorize (returns updated) for request 23
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 23
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3 
  eaptls_process returned 3 
  rlm_eap_peap: EAPTLS_SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 23
modcall: leaving group authenticate (returns handled) for request 23
Sending Access-Challenge of id 25 to 172.18.251.101 port 20469
	EAP-Message = 0x011700201900170301001541948caebfdb7bce995e12515e333e57835c6eb971
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x3c43164879792e9ed60aa36fafed4e9d
Finished request 23
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20470, id=26, length=198
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x3c43164879792e9ed60aa36fafed4e9d
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0217002a1900170301001f1065287fee5eb7343cb84c8dad2d4959249e5520f45fdb0c24de2d2e2dd21e
	Message-Authenticator = 0xcdd242f83636fb700f907a9e4dda2a14
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 24
  rlm_eap: EAP packet type response id 23 length 42
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 24
modcall: leaving group authorize (returns updated) for request 24
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 24
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Identity - CHRT\jpbrunain
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled identity of CHRT\jpbrunain
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to CHRT\jpbrunain
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 24
  rlm_eap: EAP packet type response id 23 length 19
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 24
modcall: leaving group authorize (returns updated) for request 24
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 24
  rlm_eap: EAP Identity
  rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 24
modcall: leaving group authenticate (returns handled) for request 24
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 24
modcall: leaving group authenticate (returns handled) for request 24
Sending Access-Challenge of id 26 to 172.18.251.101 port 20470
	EAP-Message = 0x0118003f1900170301003428f7e2f09ec64fefc7ccb1336e1e10440c21e04eacb8b716c2b3bc48dd8216df9ee97a081e3423b31653c6696cbc62601faaef94
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x80997b6e9e8cb85758ca6d5fd1b74563
Finished request 24
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20471, id=27, length=252
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x80997b6e9e8cb85758ca6d5fd1b74563
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021800601900170301005550c4dd66b9b564842e95761b9f4a245fa8a7947974227fe090706e808e20f713d618b981a7123922835cf19c71371fe81af763c48d78366ba468bf9037820e7092cc06fb34c38253ff5135621c6f026ebee91a8b32
	Message-Authenticator = 0xbfc073342d6935e06d672999f45885f2
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 25
  rlm_eap: EAP packet type response id 24 length 96
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 25
modcall: leaving group authorize (returns updated) for request 25
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 25
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Setting User-Name to CHRT\jpbrunain
  PEAP: Adding old state with 2f 78
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 25
  rlm_eap: EAP packet type response id 24 length 73
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 25
modcall: leaving group authorize (returns updated) for request 25
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 25
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 25
  rlm_mschap: No User-Password configured.  Cannot create LM-Password.
  rlm_mschap: No User-Password configured.  Cannot create NT-Password.
  rlm_mschap: NT Domain delimeter found, should we have enabled with_ntdomain_hack?
  rlm_mschap: Told to do MS-CHAPv2 for CHRT\jpbrunain with NT-Password
radius_xlat: Running registered xlat function of module mschap for string 'User-Name'
radius_xlat: Running registered xlat function of module mschap for string 'NT-Domain'
radius_xlat: Running registered xlat function of module mschap for string 'Challenge'
 mschap2: 13
  rlm_mschap: NT Domain delimeter found, should we have enabled with_ntdomain_hack?
radius_xlat: Running registered xlat function of module mschap for string 'NT-Response'
radius_xlat:  '/usr/local/bin/ntlm_auth --request-nt-key --username=jpbrunain --domain=CHRT --challenge=c16a651e486770b1 --nt-response=743385f1790d9cfa13046f8771b488e7132022e9f61a3fc7'
Exec-Program: /usr/local/bin/ntlm_auth --request-nt-key --username=jpbrunain --domain=CHRT --challenge=c16a651e486770b1 --nt-response=743385f1790d9cfa13046f8771b488e7132022e9f61a3fc7
Exec-Program output: Logon failure (0xc000006d) 
Exec-Program-Wait: plaintext: Logon failure (0xc000006d) 
Exec-Program: returned: 1
  rlm_mschap: External script failed.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
  modcall[authenticate]: module "mschap" returns reject for request 25
modcall: leaving group MS-CHAP (returns reject) for request 25
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns reject for request 25
modcall: leaving group authenticate (returns reject) for request 25
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client localhost port 0)
  PEAP: Tunneled authentication was rejected.
  rlm_eap_peap: FAILURE
  modcall[authenticate]: module "eap" returns handled for request 25
modcall: leaving group authenticate (returns handled) for request 25
Sending Access-Challenge of id 27 to 172.18.251.101 port 20471
	EAP-Message = 0x011900261900170301001b07fdaf03cc726ee647e6193f16f212aff7689a48545fdc3d15e590
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x8d4d81c226bd7a23a7e7db1f5755e578
Finished request 25
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20472, id=28, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x8d4d81c226bd7a23a7e7db1f5755e578
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021900261900170301001b5249447e06e4143f0c9b285f3d080ccbef9d2e58e3962386a55f63
	Message-Authenticator = 0x91b167eca904ddf3f0e56225e98ee8ed
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 26
  rlm_eap: EAP packet type response id 25 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 26
modcall: leaving group authorize (returns updated) for request 26
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 26
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure, rejecting.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 26
modcall: leaving group authenticate (returns invalid) for request 26
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 26 for 1 seconds
Finished request 26
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20473, id=28, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x8d4d81c226bd7a23a7e7db1f5755e578
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021900261900170301001b5249447e06e4143f0c9b285f3d080ccbef9d2e58e3962386a55f63
	Message-Authenticator = 0x91b167eca904ddf3f0e56225e98ee8ed
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 27
  rlm_eap: EAP packet type response id 25 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 27
modcall: leaving group authorize (returns updated) for request 27
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 27
  rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 27
modcall: leaving group authenticate (returns invalid) for request 27
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 27 for 1 seconds
Finished request 27
Going to the next request
--- Walking the entire request list ---
Sending Access-Reject of id 28 to 172.18.251.101 port 20472
	EAP-Message = 0x04190004
	Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 28 to 172.18.251.101 port 20473
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20474, id=28, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x8d4d81c226bd7a23a7e7db1f5755e578
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021900261900170301001b5249447e06e4143f0c9b285f3d080ccbef9d2e58e3962386a55f63
	Message-Authenticator = 0x91b167eca904ddf3f0e56225e98ee8ed
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 28
  rlm_eap: EAP packet type response id 25 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 28
modcall: leaving group authorize (returns updated) for request 28
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 28
  rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 28
modcall: leaving group authenticate (returns invalid) for request 28
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 28 for 1 seconds
Finished request 28
Going to the next request
Cleaning up request 19 ID 21 with timestamp 442943e1
Cleaning up request 20 ID 22 with timestamp 442943e1
Cleaning up request 21 ID 23 with timestamp 442943e1
Cleaning up request 22 ID 24 with timestamp 442943e1
Cleaning up request 23 ID 25 with timestamp 442943e1
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 24 ID 26 with timestamp 442943e2
Cleaning up request 25 ID 27 with timestamp 442943e2
Cleaning up request 26 ID 28 with timestamp 442943e2
Sending Access-Reject of id 28 to 172.18.251.101 port 20474
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 27 ID 28 with timestamp 442943e4
Waking up in 2 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20475, id=29, length=157
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021a001301434852545c6a706272756e61696e
	Message-Authenticator = 0x359cf0de67c0f2de228577278dc9a9ac
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 29
  rlm_eap: EAP packet type response id 26 length 19
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 29
modcall: leaving group authorize (returns updated) for request 29
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 29
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 29
modcall: leaving group authenticate (returns handled) for request 29
Sending Access-Challenge of id 29 to 172.18.251.101 port 20475
	EAP-Message = 0x011b00061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x322a73669ca0f3ce4d6a252806e977cf
Finished request 29
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20476, id=30, length=268
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x322a73669ca0f3ce4d6a252806e977cf
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 226 characters]
	Message-Authenticator = 0x3fd57f6dbcdb9276d10cb29cbb9b9263
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 30
  rlm_eap: EAP packet type response id 27 length 112
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 30
modcall: leaving group authorize (returns updated) for request 30
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 30
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
    (other): before/accept initialization 
    TLS_accept: before/accept initialization 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello  
    TLS_accept: SSLv3 read client hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello  
    TLS_accept: SSLv3 write server hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0652], Certificate  
    TLS_accept: SSLv3 write certificate A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
    TLS_accept: SSLv3 write server done A 
    TLS_accept: SSLv3 flush data 
    TLS_accept:error in SSLv3 read client certificate A 
In SSL Handshake Phase 
In SSL Accept mode  
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 30
modcall: leaving group authenticate (returns handled) for request 30
Sending Access-Challenge of id 30 to 172.18.251.101 port 20476
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 496 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x1dce43f93c3fe1a1312dfd06a97f59d4
Finished request 30
Going to the next request
Cleaning up request 28 ID 28 with timestamp 442943e6
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20477, id=31, length=162
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x1dce43f93c3fe1a1312dfd06a97f59d4
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021c00061900
	Message-Authenticator = 0xfd07ee2ad5595e1e4187ef653fefd0c6
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 31
  rlm_eap: EAP packet type response id 28 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 31
modcall: leaving group authorize (returns updated) for request 31
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 31
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 31
modcall: leaving group authenticate (returns handled) for request 31
Sending Access-Challenge of id 31 to 172.18.251.101 port 20477
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 432 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x69176e87a3e323e5cd7165fa76a14333
Finished request 31
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20478, id=32, length=348
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x69176e87a3e323e5cd7165fa76a14333
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 386 characters]
	Message-Authenticator = 0x383f85d64c9aec75a69bf89c323f6e53
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 32
  rlm_eap: EAP packet type response id 29 length 192
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 32
modcall: leaving group authorize (returns updated) for request 32
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 32
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
    TLS_accept: SSLv3 read client key exchange A 
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]  
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 read finished A 
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]  
    TLS_accept: SSLv3 write change cipher spec A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 write finished A 
    TLS_accept: SSLv3 flush data 
    (other): SSL negotiation finished successfully 
SSL Connection Established 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 32
modcall: leaving group authenticate (returns handled) for request 32
Sending Access-Challenge of id 32 to 172.18.251.101 port 20478
	EAP-Message = 0x011e003119001403010001011603010020dd76265ab54e8b6ce1962314a32241d9f5275ad5eb4612be85237d0a9a036a36
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x3fa40ecd9420b456866dc141b7cb427b
Finished request 32
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20479, id=33, length=162
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x3fa40ecd9420b456866dc141b7cb427b
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021e00061900
	Message-Authenticator = 0x467019c438198219aae15ecfc44eddee
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 33
  rlm_eap: EAP packet type response id 30 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 33
modcall: leaving group authorize (returns updated) for request 33
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 33
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3 
  eaptls_process returned 3 
  rlm_eap_peap: EAPTLS_SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 33
modcall: leaving group authenticate (returns handled) for request 33
Sending Access-Challenge of id 33 to 172.18.251.101 port 20479
	EAP-Message = 0x011f002019001703010015e09f6c2c955acf6b83998832c94f879a67d16479d8
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xc78b1c26eb8e049a1ba6fca65ad5fbd6
Finished request 33
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20480, id=34, length=198
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0xc78b1c26eb8e049a1ba6fca65ad5fbd6
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x021f002a1900170301001f8ca91d215ea2959c27a4f7d471e20b24dd243c1feef109ece18b8bccfba33d
	Message-Authenticator = 0xbac1a462b2a82798eb178b317fe72db0
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 34
  rlm_eap: EAP packet type response id 31 length 42
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 34
modcall: leaving group authorize (returns updated) for request 34
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 34
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Identity - CHRT\jpbrunain
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled identity of CHRT\jpbrunain
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to CHRT\jpbrunain
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 34
  rlm_eap: EAP packet type response id 31 length 19
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 34
modcall: leaving group authorize (returns updated) for request 34
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 34
  rlm_eap: EAP Identity
  rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 34
modcall: leaving group authenticate (returns handled) for request 34
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 34
modcall: leaving group authenticate (returns handled) for request 34
Sending Access-Challenge of id 34 to 172.18.251.101 port 20480
	EAP-Message = 0x0120003f1900170301003459a241cac39875b281b420941ede68b48bae3f2f6494d1771830412f9ee6f6a309c8ea2c4a49d9b85bda83e3dfa8c48d44f846bd
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x5ee3922d6bc46316c899f122df145e63
Finished request 34
Going to the next request
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20481, id=35, length=252
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x5ee3922d6bc46316c899f122df145e63
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x022000601900170301005541c6c18fcff5d5bec63f9a4d02fc99cef8c88746cb5c581e4b8b33cd3a79fa574dcfdce7c6d2304e7e4b83e638803f2081e21164cbd4a9aab51e126fd6d4e6b91f0cf8875e9628f4c8c7e0a23ad4722455b97fbb17
	Message-Authenticator = 0x5d4a41e23f2d28e2b1faa27af7fc79bb
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 35
  rlm_eap: EAP packet type response id 32 length 96
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 35
modcall: leaving group authorize (returns updated) for request 35
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 35
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Setting User-Name to CHRT\jpbrunain
  PEAP: Adding old state with 22 e8
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 35
  rlm_eap: EAP packet type response id 32 length 73
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 35
modcall: leaving group authorize (returns updated) for request 35
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 35
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 35
  rlm_mschap: No User-Password configured.  Cannot create LM-Password.
  rlm_mschap: No User-Password configured.  Cannot create NT-Password.
  rlm_mschap: NT Domain delimeter found, should we have enabled with_ntdomain_hack?
  rlm_mschap: Told to do MS-CHAPv2 for CHRT\jpbrunain with NT-Password
radius_xlat: Running registered xlat function of module mschap for string 'User-Name'
radius_xlat: Running registered xlat function of module mschap for string 'NT-Domain'
radius_xlat: Running registered xlat function of module mschap for string 'Challenge'
 mschap2: 4a
  rlm_mschap: NT Domain delimeter found, should we have enabled with_ntdomain_hack?
radius_xlat: Running registered xlat function of module mschap for string 'NT-Response'
radius_xlat:  '/usr/local/bin/ntlm_auth --request-nt-key --username=jpbrunain --domain=CHRT --challenge=c287b8317efc5b94 --nt-response=3059749bcd8c5d3ccdf15aefc7d11627784ba0f0bbe580e9'
Exec-Program: /usr/local/bin/ntlm_auth --request-nt-key --username=jpbrunain --domain=CHRT --challenge=c287b8317efc5b94 --nt-response=3059749bcd8c5d3ccdf15aefc7d11627784ba0f0bbe580e9
Exec-Program output: Logon failure (0xc000006d) 
Exec-Program-Wait: plaintext: Logon failure (0xc000006d) 
Exec-Program: returned: 1
  rlm_mschap: External script failed.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
  modcall[authenticate]: module "mschap" returns reject for request 35
modcall: leaving group MS-CHAP (returns reject) for request 35
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns reject for request 35
modcall: leaving group authenticate (returns reject) for request 35
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client localhost port 0)
  PEAP: Tunneled authentication was rejected.
  rlm_eap_peap: FAILURE
  modcall[authenticate]: module "eap" returns handled for request 35
modcall: leaving group authenticate (returns handled) for request 35
Sending Access-Challenge of id 35 to 172.18.251.101 port 20481
	EAP-Message = 0x012100261900170301001b8d7866547bb9857c550a9a8324a37bc33f3d10274012c2e0d6800c
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x80d26d2b5771117f704883beae4915d8
Finished request 35
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20482, id=36, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x80d26d2b5771117f704883beae4915d8
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x022100261900170301001be0469cf8f213f1db334c60e9c01a144dbac67e86744c4c424ac83a
	Message-Authenticator = 0x3a127848b540c2f16fd2ef073aba6517
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 36
  rlm_eap: EAP packet type response id 33 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 36
modcall: leaving group authorize (returns updated) for request 36
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 36
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure, rejecting.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 36
modcall: leaving group authenticate (returns invalid) for request 36
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 36 for 1 seconds
Finished request 36
Going to the next request
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20483, id=36, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x80d26d2b5771117f704883beae4915d8
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x022100261900170301001be0469cf8f213f1db334c60e9c01a144dbac67e86744c4c424ac83a
	Message-Authenticator = 0x3a127848b540c2f16fd2ef073aba6517
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 37
  rlm_eap: EAP packet type response id 33 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 37
modcall: leaving group authorize (returns updated) for request 37
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 37
  rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 37
modcall: leaving group authenticate (returns invalid) for request 37
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 37 for 1 seconds
Finished request 37
Going to the next request
--- Walking the entire request list ---
Sending Access-Reject of id 36 to 172.18.251.101 port 20482
	EAP-Message = 0x04210004
	Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 36 to 172.18.251.101 port 20483
Waking up in 1 seconds...
rad_recv: Access-Request packet from host 172.18.251.101:20484, id=36, length=194
	User-Name = "CHRT\\jpbrunain"
	NAS-IP-Address = 172.18.251.101
	Called-Station-Id = "00:A0:F8:E6:63:0C"
	Calling-Station-Id = "00:14:A5:2E:AF:B8"
	NAS-Identifier = "WS5000"
	Vendor-388-Attr-2 = 0x43485254
	NAS-Port = 29
	Framed-MTU = 1000
	State = 0x80d26d2b5771117f704883beae4915d8
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x022100261900170301001be0469cf8f213f1db334c60e9c01a144dbac67e86744c4c424ac83a
	Message-Authenticator = 0x3a127848b540c2f16fd2ef073aba6517
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 38
  rlm_eap: EAP packet type response id 33 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 38
modcall: leaving group authorize (returns updated) for request 38
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 38
  rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown EAP-request
  rlm_eap: Failed in handler
  modcall[authenticate]: module "eap" returns invalid for request 38
modcall: leaving group authenticate (returns invalid) for request 38
auth: Failed to validate the user.
Login incorrect: [CHRT\\jpbrunain/<no User-Password attribute>] (from client WS5100 port 29 cli 00:14:A5:2E:AF:B8)
Delaying request 38 for 1 seconds
Finished request 38
Going to the next request
Cleaning up request 29 ID 29 with timestamp 442943eb
Cleaning up request 30 ID 30 with timestamp 442943eb
Cleaning up request 31 ID 31 with timestamp 442943eb
Cleaning up request 32 ID 32 with timestamp 442943eb
Cleaning up request 33 ID 33 with timestamp 442943eb
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 34 ID 34 with timestamp 442943eb
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 35 ID 35 with timestamp 442943ec
Cleaning up request 36 ID 36 with timestamp 442943ec
Sending Access-Reject of id 36 to 172.18.251.101 port 20484
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 37 ID 36 with timestamp 442943ee
Waking up in 2 seconds...