Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/priv/1x/freeradius-1.1.2/etc/raddb/proxy.conf Config: including file: /usr/priv/1x/freeradius-1.1.2/etc/raddb/clients.conf Config: including file: /usr/priv/1x/freeradius-1.1.2/etc/raddb/snmp.conf Config: including file: /usr/priv/1x/freeradius-1.1.2/etc/raddb/eap.conf Config: including file: /usr/priv/1x/freeradius-1.1.2/etc/raddb/sql.conf main: prefix = "/usr/priv/1x/freeradius-1.1.2" main: localstatedir = "/usr/priv/1x/freeradius-1.1.2/var" main: logdir = "/usr/priv/1x/freeradius-1.1.2/var/log/radius" main: libdir = "/usr/priv/1x/freeradius-1.1.2/lib" main: radacctdir = "/usr/priv/1x/freeradius-1.1.2/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1782 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/priv/1x/freeradius-1.1.2/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/usr/priv/1x/freeradius-1.1.2/var/run/radiusd/radiusd.pid" main: bind_address = pdc.cs.aau.dk IP address [130.225.194.5] main: user = "pack" main: group = "pack" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/priv/1x/freeradius-1.1.2/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/priv/1x/freeradius-1.1.2/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "/q/disk_0/samba/bin/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge} --nt-response=%{mschap:NT-Response}" Module: Instantiated mschap (mschap) Module: Loaded LDAP ldap: server = "pdc.cs.aau.dk" ldap: port = 636 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "cn=admin,ou=DSA,dc=cs,dc=aau,dc=dk" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "xxxxx" ldap: basedn = "ou=Accounts,dc=cs,dc=aau,dc=dk" ldap: filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "userPassword" ldap: access_attr = "uid" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /usr/priv/1x/freeradius-1.1.2/etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x991b948 Module: Instantiated ldap (ldap) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/certs/pdc.key" tls: certificate_file = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/certs/pdc.pem" tls: CA_file = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/certs/cacert.pem" tls: private_key_password = "(null)" tls: dh_file = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/certs/dh" tls: random_file = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "md5" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/huntgroups" preprocess: hints = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded files files: usersfile = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/users" files: acctusersfile = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/priv/1x/freeradius-1.1.2/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/usr/priv/1x/freeradius-1.1.2/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/priv/1x/freeradius-1.1.2/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/usr/priv/1x/freeradius-1.1.2/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication 130.225.194.5:1782 Listening on accounting 130.225.194.5:1783 Ready to process requests. rad_recv: Access-Request packet from host 192.168.122.32:1645, id=61, length=148 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x6d9f1ff8be15ec0f2b76175a47a684dd EAP-Message = 0x0202001601677565737431304063732e6161752e646b NAS-Port-Type = Wireless-802.11 NAS-Port = 348 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to pdc.cs.aau.dk:636, authentication 0 rlm_ldap: setting TLS mode to 1 rlm_ldap: bind as cn=admin,ou=DSA,dc=cs,dc=aau,dc=dk/xxxxx to pdc.cs.aau.dk:636 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 61 to 192.168.122.32 port 1645 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc62ae1795c8aa7d4290ff3c0b7b1a00a Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=62, length=256 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x68cf38540bdeaeac88136e31b831b8c0 EAP-Message = 0x0203007019800000006616030100610100005d03014498e854c7ba58e9926f91433b8def48bcd3bb83b97ae144638bfb9571cd9c622088283e0b8e48b5a129de3e844bc957997f464a8b195929e29d3d00e41ec05e8c001600040005000a000900640062000300060013001200630100 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0xc62ae1795c8aa7d4290ff3c0b7b1a00a NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 3 length 112 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 05e0], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 62 to 192.168.122.32 port 1645 EAP-Message = 0x0104040a19c00000063d160301004a0200004603014498e81749069dfc3d073f2fdef59db688ed50c8c0ae1394e8ed9af942d7de6f203b584811302e79d658c9549631d5d39cffec9723b9e5711853017fe57d7305dd00040016030105e00b0005dc0005d900028f3082028b308201f4a003020102020103300d06092a864886f70d01010505003074310b300906035504061302444b3110300e060355040813074a75746c616e643110300e0603550407130741616c626f7267311b3019060355040a131241616c626f726720556e697665727369747931243022060355040b131b436f6d707574657220536369656e6365204465706172746d656e74 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1241616c626f726720556e6976657273697479312430 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf0400f71d8f464e4673d628ae94e7397 Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=63, length=150 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0xe2781fc2f07a9ec3d2d4566d4d729137 EAP-Message = 0x020400061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0xf0400f71d8f464e4673d628ae94e7397 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 63 to 192.168.122.32 port 1645 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x364fecb7f81ab08bd9be02084f7c0abbe9be3b90499588e29d15708513815fb1571e34621aceac7d702b8bf0d07e332b5c8e524a964109613be254583ef286cd16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdf5257eba7c2f430d490fb96ba1055de Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=64, length=336 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0xc5ab87b22101604f8ba002315c80b951 EAP-Message = 0x020500c01980000000b6160301008610000082008071b69d4bda80b0a37f7c0ab9a8fa830f4debe662413e95321ca6dbb83173ededed45d69777928ee1aad3b6de3c8e41212c04cd49af5dedf29951f015a6ca4f6c9a00bbef06475dff5ac86b4255a5fb5db3368667c7a371b9b08d26de777746c42e7e9c25f7dc7229a0d58f1b6229b83590bb3ec325dee94a86e232307cf991be140301000101160301002011479ea5cf95c5342cc3ffae6a9357392bf16062e595591e2fecdc090f6bf3f2 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0xdf5257eba7c2f430d490fb96ba1055de NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 5 length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 64 to 192.168.122.32 port 1645 EAP-Message = 0x0106003119001403010001011603010020ffc3017da415f531022d9a0a5b5a802ba23a164e76fdd03987fcc5592ba0a46e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5b43cd3d8064fc01c2f2fa4e18891710 Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=65, length=150 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x4e1e320a71ad631b17a9ec5a5d12c1ce EAP-Message = 0x020600061900 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0x5b43cd3d8064fc01c2f2fa4e18891710 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 6 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 65 to 192.168.122.32 port 1645 EAP-Message = 0x010700201900170301001564ab7676ece7efb7b2cb88708cf0b7e17651cb23d8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x5c294841288a361fade916d6dee8fc09 Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=66, length=189 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0xf4fe2a81fd842c6a362f158d30d84b24 EAP-Message = 0x0207002d19001703010022aae375b4b000aebb976c90a6058c91a776bfced8f2985de2586273d66fb58225f772 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0x5c294841288a361fade916d6dee8fc09 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 7 length 45 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - guest10@cs.aau.dk rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of guest10@cs.aau.dk PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to guest10@cs.aau.dk Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 7 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 66 to 192.168.122.32 port 1645 EAP-Message = 0x0108004219001703010037ee66f237337386ba24a8dc0421f217181ed1f28332b96e9c267fce5437a43a5617b66ae51dd1adeda0b39dd6386296e86525d62ff19025 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4ae826703a54f4de0b4115b6c34aa9f3 Finished request 5 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=67, length=243 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x4bcd3b5231a96c088823ad3c798abe51 EAP-Message = 0x0208006319001703010058d6a83493b54b2afd6bd139f8c0a3c56eecce1cf2de36f241d94811f51c4b960f52a5a3024a36314431d2a615088912a075353845599d18c8c4bde76f08b09d69738372aa6100cf5cf2093801b270075612a9ececa3ab7b5d NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0x4ae826703a54f4de0b4115b6c34aa9f3 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 8 length 99 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to guest10@cs.aau.dk PEAP: Adding old state with 6d e3 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 8 length 76 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 6 rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: Told to do MS-CHAPv2 for guest10@cs.aau.dk with NT-Password radius_xlat: Running registered xlat function of module mschap for string 'Challenge' mschap2: 4b radius_xlat: Running registered xlat function of module mschap for string 'NT-Response' radius_xlat: '/q/disk_0/samba/bin/ntlm_auth --request-nt-key --username=guest10 --challenge=92f8502315992439 --nt-response=1322cac37f44c9c94ba2927766cf7a47084dc758fc0badc4' Exec-Program: /q/disk_0/samba/bin/ntlm_auth --request-nt-key --username=guest10 --challenge=92f8502315992439 --nt-response=1322cac37f44c9c94ba2927766cf7a47084dc758fc0badc4 Exec-Program output: NT_KEY: C940054D24058EB8F249BBD458AD700E Exec-Program-Wait: plaintext: NT_KEY: C940054D24058EB8F249BBD458AD700E Exec-Program: returned: 0 rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 6 modcall: leaving group MS-CHAP (returns ok) for request 6 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 67 to 192.168.122.32 port 1645 EAP-Message = 0x0109004a1900170301003f4edab2ab6535cd05b5e6d0e37cf80440eb5418c86fc760b3e0bc7fd04dc7e96ceed7bedc6f39154b668c399019185b0e5d65c26fb3fb15525d864f96ed77d5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x91db25be408a393a4c9a032a3c2e2d10 Finished request 6 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=68, length=173 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x8bb1fe1cf45835c57876ccb557b29053 EAP-Message = 0x0209001d19001703010012d3e80445602235c1be37caa9839ec80dfb21 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0x91db25be408a393a4c9a032a3c2e2d10 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 9 length 29 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to guest10@cs.aau.dk PEAP: Adding old state with c3 03 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 9 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 7 modcall: leaving group authenticate (returns ok) for request 7 Login OK: [guest10@cs.aau.dk] (from client localhost port 0) PEAP: Tunneled authentication was successful. rlm_eap_peap: SUCCESS modcall[authenticate]: module "eap" returns handled for request 7 modcall: leaving group authenticate (returns handled) for request 7 Sending Access-Challenge of id 68 to 192.168.122.32 port 1645 EAP-Message = 0x010a00261900170301001b23f5fd8c34da57125bca62097763a709e6f242b22f404dc707a437 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaa16f80f99772db86aa1c9b9d12951b1 Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=69, length=182 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9181" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0xceec87fbe7850d0515dab5a31215c281 EAP-Message = 0x020a00261900170301001b33f9521d112cd79adeeaa3fe4018589e325b1ed0fb27f3f52052a3 NAS-Port-Type = Wireless-802.11 NAS-Port = 348 State = 0xaa16f80f99772db86aa1c9b9d12951b1 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "chap" returns noop for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Adding Stripped-User-Name = "guest10" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 10 length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 rlm_ldap: - authorize rlm_ldap: performing user authorization for guest10 radius_xlat: '(uid=guest10)' radius_xlat: 'ou=Accounts,dc=cs,dc=aau,dc=dk' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=Accounts,dc=cs,dc=aau,dc=dk, with filter (uid=guest10) rlm_ldap: checking if remote access for guest10 is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user guest10 authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 8 modcall: leaving group authorize (returns updated) for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Success rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 8 modcall: leaving group authenticate (returns ok) for request 8 Login OK: [guest10@cs.aau.dk] (from client ap2 port 348 cli 000f.2093.9f60) Sending Access-Accept of id 69 to 192.168.122.32 port 1645 MS-MPPE-Recv-Key = 0x3b11f0200048eacb63576c939989267c503e8d7854209192690645d6bbd05061 MS-MPPE-Send-Key = 0xfd4248e5981e86309b3f86bd87730462eb70bb84989cd8ea74b2ec2861368a79 EAP-Message = 0x030a0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "guest10" Finished request 8 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 61 with timestamp 4498e817 Cleaning up request 1 ID 62 with timestamp 4498e817 Cleaning up request 2 ID 63 with timestamp 4498e817 Cleaning up request 3 ID 64 with timestamp 4498e817 Cleaning up request 4 ID 65 with timestamp 4498e817 Cleaning up request 5 ID 66 with timestamp 4498e817 Cleaning up request 6 ID 67 with timestamp 4498e817 Cleaning up request 7 ID 68 with timestamp 4498e817 Cleaning up request 8 ID 69 with timestamp 4498e817 Nothing to do. Sleeping until we see a request.