Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/priv/freeradius-1.1.2/etc/raddb/proxy.conf Config: including file: /usr/priv/freeradius-1.1.2/etc/raddb/clients.conf Config: including file: /usr/priv/freeradius-1.1.2/etc/raddb/snmp.conf Config: including file: /usr/priv/freeradius-1.1.2/etc/raddb/eap.conf Config: including file: /usr/priv/freeradius-1.1.2/etc/raddb/sql.conf main: prefix = "/usr/priv/freeradius-1.1.2" main: localstatedir = "/usr/priv/freeradius-1.1.2/var" main: logdir = "/usr/priv/freeradius-1.1.2/var/log/radius" main: libdir = "/usr/priv/freeradius-1.1.2/lib" main: radacctdir = "/usr/priv/freeradius-1.1.2/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1812 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/priv/freeradius-1.1.2/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/priv/freeradius-1.1.2/var/run/radiusd/radiusd.pid" main: bind_address = 130.225.52.58 IP address [130.225.52.58] main: user = "pack" main: group = "pack" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/priv/freeradius-1.1.2/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/priv/freeradius-1.1.2/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/priv/freeradius-1.1.2/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded preprocess preprocess: huntgroups = "/usr/priv/freeradius-1.1.2/etc/raddb/huntgroups" preprocess: hints = "/usr/priv/freeradius-1.1.2/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/priv/freeradius-1.1.2/etc/raddb/users" files: acctusersfile = "/usr/priv/freeradius-1.1.2/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/priv/freeradius-1.1.2/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/priv/freeradius-1.1.2/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/priv/freeradius-1.1.2/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Module: Loaded eap eap: default_eap_type = "tls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/priv/freeradius-1.1.2/etc/raddb/certs/radius.key" tls: certificate_file = "/usr/priv/freeradius-1.1.2/etc/raddb/certs/radius.pem" tls: CA_file = "/usr/priv/freeradius-1.1.2/etc/raddb/certs/cacert.pem" tls: private_key_password = "(null)" tls: dh_file = "/usr/priv/freeradius-1.1.2/etc/raddb/certs/dh" tls: random_file = "/usr/priv/freeradius-1.1.2/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "md5" ttls: copy_request_to_tunnel = no ttls: use_tunneled_reply = no rlm_eap: Loaded and initialized type ttls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Listening on authentication 130.225.52.58:1812 Listening on accounting 130.225.52.58:1813 Listening on proxy 130.225.52.58:1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.122.32:1645, id=80, length=148 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9180" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0xa2d5b0c1608a1d2d89a66fa41a7f03c9 EAP-Message = 0x0202001601677565737431304063732e6161752e646b NAS-Port-Type = Wireless-802.11 NAS-Port = 353 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Preparing to proxy authentication request to realm "cs.aau.dk" modcall[authorize]: module "suffix" returns updated for request 0 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 155 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 Sending Access-Request of id 0 to 130.225.194.5 port 1782 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9180" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x00000000000000000000000000000000 EAP-Message = 0x0202001601677565737431304063732e6161752e646b NAS-Port-Type = Wireless-802.11 NAS-Port = 353 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Proxy-State = 0x3830 --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Challenge packet from host 130.225.194.5:1782, id=0, length=68 EAP-Message = 0x010300061920 Message-Authenticator = 0x5dd2782ec2e80055cc9226ee5fc548d6 State = 0xff2aa2e2b3383c8094b601e9c2db657c Proxy-State = 0x3830 Processing the post-proxy section of radiusd.conf modcall: entering group post-proxy for request 0 modcall[post-proxy]: module "eap" returns noop for request 0 modcall: leaving group post-proxy (returns noop) for request 0 Sending Access-Challenge of id 80 to 192.168.122.32 port 1645 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xff2aa2e2b3383c8094b601e9c2db657c Finished request 0 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=80, length=148 Sending duplicate reply to client ap2:1645 - ID: 80 Re-sending Access-Challenge of id 80 to 192.168.122.32 port 1645 --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 80 with timestamp 4498eb96 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 192.168.122.32:1645, id=80, length=148 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9180" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0xa2d5b0c1608a1d2d89a66fa41a7f03c9 EAP-Message = 0x0202001601677565737431304063732e6161752e646b NAS-Port-Type = Wireless-802.11 NAS-Port = 353 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 rlm_realm: Looking up realm "cs.aau.dk" for User-Name = "guest10@cs.aau.dk" rlm_realm: Found realm "cs.aau.dk" rlm_realm: Proxying request from user guest10 to realm cs.aau.dk rlm_realm: Adding Realm = "cs.aau.dk" rlm_realm: Preparing to proxy authentication request to realm "cs.aau.dk" modcall[authorize]: module "suffix" returns updated for request 1 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 155 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 Sending Access-Request of id 1 to 130.225.194.5 port 1782 User-Name = "guest10@cs.aau.dk" Framed-MTU = 1400 Called-Station-Id = "0015.c729.9180" Calling-Station-Id = "000f.2093.9f60" Service-Type = Login-User Message-Authenticator = 0x00000000000000000000000000000000 EAP-Message = 0x0202001601677565737431304063732e6161752e646b NAS-Port-Type = Wireless-802.11 NAS-Port = 353 NAS-IP-Address = 192.168.122.32 NAS-Identifier = "ap2" Proxy-State = 0x3830 --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Challenge packet from host 130.225.194.5:1782, id=1, length=68 EAP-Message = 0x010300061920 Message-Authenticator = 0x033ff05c9d7efe2efe613a985a0b6fb9 State = 0x636421d236e97c2c6fbb4ee39070fb77 Proxy-State = 0x3830 Processing the post-proxy section of radiusd.conf modcall: entering group post-proxy for request 1 modcall[post-proxy]: module "eap" returns noop for request 1 modcall: leaving group post-proxy (returns noop) for request 1 Sending Access-Challenge of id 80 to 192.168.122.32 port 1645 EAP-Message = 0x010300061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x636421d236e97c2c6fbb4ee39070fb77 Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.122.32:1645, id=80, length=148 Sending duplicate reply to client ap2:1645 - ID: 80 Re-sending Access-Challenge of id 80 to 192.168.122.32 port 1645 --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 80 with timestamp 4498eba1 Nothing to do. Sleeping until we see a request.