<div>I tried to configure my users file like this :</div>
<div>-----</div>
<div>test NasPort-Type == Ethernet<br> Service-Type = Framed-User,<br> Tunnel-Type +=13,<br> Tunnel-Medium-Type =6,<br> Tunnel-Private-Group-ID =2
<br>-----------------</div>
<div> </div>
<div>It fails again .....</div>
<div> </div>
<div>This is my log : </div>
<div> </div>
<div>Did anyone succeded in implementing dynamic vlan with freeradius and a cisco NAS ? </div>
<div> </div>
<div> </div>
<div>Trying to look up name of unknown client <a href="http://127.0.0.1">127.0.0.1</a>.<br>Login OK: [CSB\\test/<no User-Password attribute>] (from client UNKNOWN-CLIENT port 0)<br>Sending Access-Challenge of id 4 to
<a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br> EAP-Message = 0x011000261900170301001bd4e8059152ae62965c42a62ed4c9b3eba7e2799c38360c36f9aa3b<br> Message-Authenticator = 0x00000000000000000000000000000000
<br> State = 0x87e7da01825313ef863cbec3870f5f13<br>rad_recv: Access-Request packet from host <a href="http://192.168.16.1:1645">192.168.16.1:1645</a>, id=5, length=174<br> NAS-IP-Address = <a href="http://192.168.16.1">
192.168.16.1</a><br> NAS-Port = 50147<br> NAS-Port-Type = Ethernet<br> User-Name = "CSB\\test"<br> Called-Station-Id = "00-17-5A-1B-28-B3"<br> Calling-Station-Id = "00-04-75-85-8F-61"
<br> Service-Type = Framed-User<br> Framed-MTU = 1500<br> State = 0x87e7da01825313ef863cbec3870f5f13<br> EAP-Message = 0x021000261900170301001b7096000eb8d9889a7e0e9cef0e9d571e10320adf07ee2420aa4c89
<br> Message-Authenticator = 0xf8383223d8b51167662f1641a6b2508c<br>Login OK: [CSB\\test/<no User-Password attribute>] (from client <a href="http://192.168.16.1">192.168.16.1</a> port 50147 cli 00-04-75-85-8F-61)
<br>Sending Access-Accept of id 5 to <a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br> MS-MPPE-Recv-Key = 0x3940d6891cb90e7db626720c8d65e4d838b8ab0047da30993ea2dc35508e985e<br> MS-MPPE-Send-Key = 0xb1d3912b4dba0f726cce333da644b1fc59da0d3bd0624f11db1449d8829fe081
<br> EAP-Message = 0x03100004<br> Message-Authenticator = 0x00000000000000000000000000000000<br> User-Name = "CSB\\test"<br><br><br> </div>
<div><span class="gmail_quote">2007/3/12, Edvin Seferovic <<a href="mailto:edvin.seferovic@kolp.at">edvin.seferovic@kolp.at</a>>:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hi,<br><br>please respond to freeradius mailing list....<br><br>I am not sure if you can use EAP to make a comparation.. but anyway you will
<br>need two = ( == ) instead of one = ( = )...<br><br>Try setting<br><br>test NAS-Port-Type == Ethernet<br> Tunnel-Type += 13,<br> .........<br><br>Regards,<br><br>E:S<br><br>________________________________________
<br>----------------------------------------<br>Hi,<br><br>I tried this but i never see anything about vlan in my freeradius log !! My<br>user stay in default VLAN !!!<br><br>Is my user's definition in the users file correct ?
<br><br>---------<br><br>test Auth-Type = EAP<br>Tunnel-Type += 13,<br>Tunnel-Medium-Type += 6,<br>Tunnel-Private-Group-Id += 2,<br>Fall-Through += No<br>-------<br><br>Thanks....<br><br>Sending Access-Challenge of id 148 to
<a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>EAP-Message =<br>0x019500201900170301001594b0749a153a5db24986ad5b383747d599cefa165e<br>Message-Authenticator = 0x00000000000000000000000000000000<br>State = 0xfaadc1f3fdcd54caba3eb520194cbda4
<br>rad_recv: Access-Request packet from host <a href="http://192.168.16.1:1645">192.168.16.1:1645</a>, id=149,<br>length=172<br>NAS-IP-Address = <a href="http://192.168.16.1">192.168.16.1</a><br>NAS-Port = 50147<br><br>User-Name = "CSB\\test"
<br>Called-Station-Id = "00-17-5A-1B-28-B3"<br>Calling-Station-Id = "00-04-75-85-8F-61"<br>Service-Type = Framed-User<br>Framed-MTU = 1500<br>State = 0xfaadc1f3fdcd54caba3eb520194cbda4<br>EAP-Message =
<br>0x0295002419001703010019d71271328e83be4bb86e90cb9cf78a13f6e92985f71a24f71b<br>Message-Authenticator = 0x6534f60da4b6f525ae500bcdc1f1b683<br>rlm_eap_mschapv2: Issuing Challenge<br>Sending Access-Challenge of id 149 to
<a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>EAP-Message =<br>0x019600391900170301002e35934ed543adc3872069178f99dad4cef4ddb3891fae093be210<br>029063523c48015aeb6aa2e3d4eb17fd39890382<br>Message-Authenticator = 0x00000000000000000000000000000000
<br>State = 0x1b1b2139747f2fd4a4bbb4f9f279eb11<br>rad_recv: Access-Request packet from host <a href="http://192.168.16.1:1645">192.168.16.1:1645</a> , id=150,<br>length=226<br>NAS-IP-Address = <a href="http://192.168.16.1">
192.168.16.1</a><br>NAS-Port = 50147<br>NAS-Port-Type = Ethernet<br>User-Name = "CSB\\test"<br>Called-Station-Id = "00-17-5A-1B-28-B3"<br>Calling-Station-Id = "00-04-75-85-8F-61"<br>Service-Type = Framed-User
<br>Framed-MTU = 1500<br>State = 0x1b1b2139747f2fd4a4bbb4f9f279eb11<br>EAP-Message =<br>0x0296005a1900170301004f8e53cc58384cebdce1096ef486e518b9efd644cb4029eb633ef3<br>f06b1682f03fed4152d8f5eac2bd535a02befb274d4a591c3e60910efcec65ba22d6d5c33c8a
<br>50797ccfca8f0c7c57bc2287068b2d<br>Message-Authenticator = 0x416672a07b4421f704970f07db03e442<br>radius_xlat: Running registered xlat function of module mschap for string<br>'NT-Domain'<br>radius_xlat: Running registered xlat function of module mschap for string
<br>'User-Name'<br>radius_xlat: Running registered xlat function of module mschap for string<br>'Challenge'<br>radius_xlat: Running registered xlat function of module mschap for string<br>'NT-Response'
<br>Exec-Program: /usr/bin/ntlm_auth --request-nt-key --domain=CSB<br>--username=test --challenge=3e2e4fe28bd9b464<br>--nt-response=927de3350c738b570a464aeac694ca367884505006ceb2af<br>Exec-Program-Wait: plaintext: NT_KEY: 2066656E05C22F3A995AD9ECFED913D6
<br>Exec-Program: returned: 0<br>Sending Access-Challenge of id 150 to <a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>EAP-Message =<br>0x0197004a1900170301003fc00a2f7339369e45babdf23184b0f04fb295d015a9bd4316050d
<br>a913d6538bf4329c8c46835179297980a5b669ce00e7b984fa8368858b6db4cea48759d7c1<br>Message-Authenticator = 0x00000000000000000000000000000000<br>State = 0x7ef7f6d05a6f3d00427213ecb574faa2<br>rad_recv: Access-Request packet from host
<a href="http://192.168.16.1:1645">192.168.16.1:1645</a> , id=151,<br>length=165<br>NAS-IP-Address = <a href="http://192.168.16.1">192.168.16.1</a><br>NAS-Port = 50147<br>NAS-Port-Type = Ethernet<br>User-Name = "CSB\\test"
<br>Called-Station-Id = "00-17-5A-1B-28-B3"<br>Calling-Station-Id = "00-04-75-85-8F-61"<br>Service-Type = Framed-User<br>Framed-MTU = 1500<br>State = 0x7ef7f6d05a6f3d00427213ecb574faa2<br>EAP-Message =
<br>0x0297001d190017030100128fca90d7480fc827988c01b59ca594725eda<br>Message-Authenticator = 0xf453065f5ccd452281e10cf4fcce3d8a<br>Trying to look up name of unknown client <a href="http://127.0.0.1">127.0.0.1</a>.<br>Login OK: [CSB\\test/<no User-Password attribute>] (from client
<br>UNKNOWN-CLIENT port 0)<br>Sending Access-Challenge of id 151 to <a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>EAP-Message =<br>0x019800261900170301001b424c8e15103d6091ff787a4a81a9d7f36e071506fee1dd9365f8
<br>27<br>Message-Authenticator = 0x00000000000000000000000000000000<br>State = 0x00edbd8474f305a438e2129b69d8d833<br>rad_recv: Access-Request packet from host <a href="http://192.168.16.1:1645">192.168.16.1:1645</a>, id=152,
<br>length=174<br>NAS-IP-Address = <a href="http://192.168.16.1">192.168.16.1</a><br>NAS-Port = 50147<br>NAS-Port-Type = Ethernet<br>User-Name = "CSB\\test"<br>Called-Station-Id = "00-17-5A-1B-28-B3"<br>
Calling-Station-Id = "00-04-75-85-8F-61"<br>Service-Type = Framed-User<br>Framed-MTU = 1500<br>State = 0x00edbd8474f305a438e2129b69d8d833<br>EAP-Message =<br>0x029800261900170301001bae5f10c31db3214c9b97a5a5f8a4c027e3e599ea4820750c4376
<br>4c<br>Message-Authenticator = 0x3b5bfbac96e06c7751c2c9405fd8bd0e<br>Login OK: [CSB\\test/<no User-Password attribute>] (from client <a href="http://192.168.16.1">192.168.16.1</a><br>port 50147 cli 00-04-75-85-8F-61)
<br>Sending Access-Accept of id 152 to <a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>MS-MPPE-Recv-Key =<br>0xa159f53b8ccddbfe198e451f9e34f4572525e4257bf0a2ef0d62f9b829de2405<br>MS-MPPE-Send-Key =<br>0x57d9ef257640d9cf18b06cf26ddca8083e2484464499e2b9b74c8ac5ccd6a213
<br>EAP-Message = 0x03980004<br>Message-Authenticator = 0x00000000000000000000000000000000<br>User-Name = "CSB\\test"<br><br><br>2007/3/9, Bruno Mardirossian <<a href="mailto:b.mardirossian@gmail.com">b.mardirossian@gmail.com
</a>>:<br>Thanks i will try this on Monday....<br><br>The rest of my configuration for the user "test" in the users file seem to<br>be correct ?<br>2007/3/9, Edvin Seferovic < <a href="mailto:edvin.seferovic@kolp.at">
edvin.seferovic@kolp.at</a>>:<br><a href="http://wiki.freeradius.org/Operators">http://wiki.freeradius.org/Operators</a><br><br>Hint += <<<< for Tunnel-Type !<br><br>Regards,<br><br>E:S<br><br>________________________________________
<br>From: freeradius-users-bounces+edvin.seferovic=<a href="mailto:kolp.at@lists.freeradius.org">kolp.at@lists.freeradius.org</a><br>[mailto:<br>freeradius-users-bounces+edvin.seferovic=<a href="mailto:kolp.at@lists.freeradius.org">
kolp.at@lists.freeradius.org</a> ] On<br>Behalf Of Bruno Mardirossian<br>Sent: Freitag, 09. März 2007 03:49<br>To: <a href="mailto:freeradius-users@lists.freeradius.org">freeradius-users@lists.freeradius.org</a><br>Subject: Freeradius and vlan assignment
<br><br>Hello!<br>I am working on implementing freeradius with a cisco 3750 switch<br>connected to freeradius , which then talks to AD.(The linux box is on the<br>AD domain)<br>Anyway, wetry to make vlan assignment by using the 'users' file .
<br>We create a user named 'test' on my AD server , and we created this section<br>in the file users :<br>test Auth-Type := MS-CHAP<br>Tunnel-Type = 13,<br>Tunnel-Medium-Type = 6,<br>Tunnel-Private-Group-Id = 2<br>
The user is correctly authenticated by AD, buthe is put in the default<br>vlan ( id 1 ) and not in the vlan defined in the file 'users' ( id 2 ) .<br>By the way, readind the radiusd output , i think that freeradius does not
<br>read my users file...i didn't see int he log anything about the Tunnel-Type<br>or Tunnel-Private-Group-Id informations....<br>Anyone have any thoughts?<br>Regards<br>Bruno<br><br>Message-Authenticator = 0xa309657e84ce8131d67aa64d9a491059
<br>Processing the authorize section of radiusd.conf<br>modcall: entering group authorize for request 6<br>modcall[authorize]: module "preprocess" returns ok for request 6<br>modcall[authorize]: module "chap" returns noop for request 6
<br>rlm_realm: No '@' in User-Name = "CSB\test", looking up realm NULL<br>rlm_realm: No such realm "NULL"<br>modcall[authorize]: module "suffix" returns noop for request 6<br>users: Matched entry DEFAULT at line 165
<br>users: Matched entry DEFAULT at line 184<br>modcall[authorize]: module "files" returns ok for request 6<br>rlm_eap: EAP packet type response id 6 length 90<br>rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
<br>modcall[authorize]: module "eap" returns updated for request 6<br>modcall[authorize]: module "mschap" returns noop for request 6<br>modcall: group authorize returns updated for request 6<br>rad_check_password: Found Auth-Type MS-CHAP
<br>rad_check_password: Found Auth-Type EAP<br>Warning: Found 2 auth-types on request for user 'CSB\test'<br>auth: type "EAP"<br>Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 6
<br>rlm_eap: Request found, released from the list<br>rlm_eap: EAP/peap<br>rlm_eap: processing type peap<br>rlm_eap_peap: Authenticate<br>rlm_eap_tls: processing TLS<br>eaptls_verify returned 7<br>rlm_eap_tls: Done initial handshake
<br>eaptls_process returned 7<br>rlm_eap_peap: EAPTLS_OK<br>rlm_eap_peap: Session established. Decoding tunneled attributes.<br>rlm_eap_peap: EAP type mschapv2<br>rlm_eap_peap: Tunneled data is valid.<br>PEAP: Setting User-Name to CSB\test
<br>PEAP: Adding old state with 86 79<br>Processing the authorize section of radiusd.conf<br>modcall: entering group authorize for request 6<br>modcall[authorize]: module "preprocess" returns ok for request 6<br>
modcall[authorize]: module "chap" returns noop for request 6<br>rlm_realm: No '@' in User-Name = "CSB\test", looking up realm NULL<br>rlm_realm: No such realm "NULL"<br>modcall[authorize]: module "suffix" returns noop for request 6
<br>users: Matched entry DEFAULT at line 165<br>modcall[authorize]: module "files" returns ok for request 6<br>rlm_eap: EAP packet type response id 6 length 67<br>rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
<br>modcall[authorize]: module "eap" returns updated for request 6<br>modcall[authorize]: module "mschap" returns noop for request 6<br>modcall: group authorize returns updated for request 6<br>rad_check_password: Found Auth-Type MS-CHAP
<br>rad_check_password: Found Auth-Type EAP<br>Warning: Found 2 auth-types on request for user 'CSB\test'<br>auth: type "EAP"<br>Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 6
<br>rlm_eap: Request found, released from the list<br>rlm_eap: EAP/mschapv2<br>rlm_eap: processing type mschapv2<br>Processing the authenticate section of radiusd.conf<br>modcall: entering group Auth-Type for request 6<br>
rlm_mschap: No User-Password configured. Cannot create LM-Password.<br>rlm_mschap: No User-Password configured. Cannot create NT-Password.<br>rlm_mschap: Told to do MS-CHAPv2 for test with NT-Password<br>radius_xlat: Running registered xlat function of module mschap for string
<br>'NT-Domain'<br>radius_xlat: Running registered xlat function of module mschap for string<br>'User-Name'<br>radius_xlat: Running registered xlat function of module mschap for string<br>'Challenge'
<br>mschap2: 9a<br>radius_xlat: Running registered xlat function of module mschap for string<br>'NT-Response'<br>radius_xlat: '/usr/bin/ntlm_auth --request-nt-key --domain=CSB<br>--username=test --challenge=0529c10bac22a3fa
<br>--nt-response=4b1e21679b85263858da26874073491971a58f8bfc024456'<br>Exec-Program: /usr/bin/ntlm_auth --request-nt-key --domain=CSB<br>--username=test --challenge=0529c10bac22a3fa<br>--nt-response=4b1e21679b85263858da26874073491971a58f8bfc024456
<br>Exec-Program output: NT_KEY: 2066656E05C22F3A995AD9ECFED913D6<br>Exec-Program-Wait: plaintext: NT_KEY: 2066656E05C22F3A995AD9ECFED913D6<br>Exec-Program: returned: 0<br>rlm_mschap: adding MS-CHAPv2 MPPE keys<br>modcall[authenticate]: module "mschap" returns ok for request 6
<br>modcall: group Auth-Type returns ok for request 6<br>MSCHAP Success<br>modcall[authenticate]: module "eap" returns handled for request 6<br>modcall: group authenticate returns handled for request 6<br>PEAP: Got tunneled Access-Challenge
<br>modcall[authenticate]: module "eap" returns handled for request 6<br>modcall: group authenticate returns handled for request 6<br>Sending Access-Challenge of id 138 to <a href="http://192.168.16.1:1645">192.168.16.1:1645
</a><br>Framed-IP-Address = <a href="http://255.255.255.254">255.255.255.254</a><br>Framed-MTU = 576<br>Service-Type = Framed-User<br>EAP-Message =<br>0x0107004a1900170301003f58b6111cc333922058a5d79f63641e19ae7154e3504573da9834
<br>6c88f080fe8ee04ad4b50f3cdc52fd02e8909b9f8f9a439730b7cee4654c18135432e651e7<br>Message-Authenticator = 0x00000000000000000000000000000000<br>State = 0x1f45be689bd5bd8a6d8ace2af886bb6c<br>Finished request 6<br>Going to the next request
<br>Waking up in 6 seconds...<br>rad_recv: Access-Request packet from host <a href="http://192.168.16.1:1645">192.168.16.1:1645</a>, id=139,<br>length=165<br>NAS-IP-Address = <a href="http://192.168.16.1">192.168.16.1</a>
<br>NAS-Port = 50147<br>NAS-Port-Type = Ethernet<br>User-Name = "CSB\\test"<br>Called-Station-Id = "00-17-5A-1B-28-B3"<br>Calling-Station-Id = "00-04-75-85-8F-61"<br>Service-Type = Framed-User
<br>Framed-MTU = 1500<br>State = 0x1f45be689bd5bd8a6d8ace2af886bb6c<br>EAP-Message =<br>0x0207001d19001703010012b8f868205426ef722e2433e5defa62455113<br>Message-Authenticator = 0x2e5a0be42b038b2404f5c93ea27d5387<br>Processing the authorize section of
radiusd.conf<br>modcall: entering group authorize for request 7<br>modcall[authorize]: module "preprocess" returns ok for request 7<br>modcall[authorize]: module "chap" returns noop for request 7<br>rlm_realm: No '@' in User-Name = "CSB\test", looking up realm NULL
<br>rlm_realm: No such realm "NULL"<br>modcall[authorize]: module "suffix" returns noop for request 7<br>users: Matched entry DEFAULT at line 165<br>users: Matched entry DEFAULT at line 184<br>modcall[authorize]: module "files" returns ok for request 7
<br>rlm_eap: EAP packet type response id 7 length 29<br>rlm_eap: No EAP Start, assuming it's an on-going EAP conversation<br>modcall[authorize]: module "eap" returns updated for request 7<br>modcall[authorize]: module "mschap" returns noop for request 7
<br>modcall: group authorize returns updated for request 7<br>rad_check_password: Found Auth-Type MS-CHAP<br>rad_check_password: Found Auth-Type EAP<br>Warning: Found 2 auth-types on request for user 'CSB\test'<br>
auth: type "EAP"<br>Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 7<br>rlm_eap: Request found, released from the list<br>rlm_eap: EAP/peap<br>rlm_eap: processing type peap
<br>rlm_eap_peap: Authenticate<br>rlm_eap_tls: processing TLS<br>eaptls_verify returned 7<br>rlm_eap_tls: Done initial handshake<br>eaptls_process returned 7<br>rlm_eap_peap: EAPTLS_OK<br>rlm_eap_peap: Session established. Decoding tunneled attributes.
<br>rlm_eap_peap: EAP type mschapv2<br>rlm_eap_peap: Tunneled data is valid.<br>PEAP: Setting User-Name to CSB\test<br>PEAP: Adding old state with a8 0f<br>Processing the authorize section of radiusd.conf<br>modcall: entering group authorize for request 7
<br>modcall[authorize]: module "preprocess" returns ok for request 7<br>modcall[authorize]: module "chap" returns noop for request 7<br>rlm_realm: No '@' in User-Name = "CSB\test", looking up realm NULL
<br>rlm_realm: No such realm "NULL"<br>modcall[authorize]: module "suffix" returns noop for request 7<br>users: Matched entry DEFAULT at line 165<br>modcall[authorize]: module "files" returns ok for request 7
<br>rlm_eap: EAP packet type response id 7 length 6<br>rlm_eap: No EAP Start, assuming it's an on-going EAP conversation<br>modcall[authorize]: module "eap" returns updated for request 7<br>modcall[authorize]: module "mschap" returns noop for request 7
<br>modcall: group authorize returns updated for request 7<br>rad_check_password: Found Auth-Type MS-CHAP<br>rad_check_password: Found Auth-Type EAP<br>Warning: Found 2 auth-types on request for user 'CSB\test'<br>
auth: type "EAP"<br>Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 7<br>rlm_eap: Request found, released from the list<br>rlm_eap: EAP/mschapv2<br>rlm_eap: processing type mschapv2
<br>rlm_eap: Freeing handler<br>modcall[authenticate]: module "eap" returns ok for request 7<br>modcall: group authenticate returns ok for request 7<br>Trying to look up name of unknown client <a href="http://127.0.0.1">
127.0.0.1</a>.<br>Login OK: [CSB\\test/<no User-Password attribute>] (from client<br>UNKNOWN-CLIENT port 0)<br>PEAP: Tunneled authentication was successful.<br>rlm_eap_peap: SUCCESS<br>modcall[authenticate]: module "eap" returns handled for request 7
<br>modcall: group authenticate returns handled for request 7<br>Sending Access-Challenge of id 139 to <a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>Framed-IP-Address = <a href="http://255.255.255.254">255.255.255.254
</a><br>Framed-MTU = 576<br>Service-Type = Framed-User<br>EAP-Message =<br>0x010800261900170301001b8d03a63c700234ed33060b7b6b9274d27b9e872a002e885ab9eb<br>f3<br>Message-Authenticator = 0x00000000000000000000000000000000<br>
State = 0x5a28f8fd3d7fde4a88411d022625e022<br>Finished request 7<br>Going to the next request<br>Waking up in 6 seconds...<br>rad_recv: Access-Request packet from host <a href="http://192.168.16.1:1645">192.168.16.1:1645</a>
, id=140,<br>length=174<br>NAS-IP-Address = <a href="http://192.168.16.1">192.168.16.1</a><br>NAS-Port = 50147<br>NAS-Port-Type = Ethernet<br>User-Name = "CSB\\test"<br>Called-Station-Id = "00-17-5A-1B-28-B3"
<br>Calling-Station-Id = "00-04-75-85-8F-61"<br>Service-Type = Framed-User<br>Framed-MTU = 1500<br>State = 0x5a28f8fd3d7fde4a88411d022625e022<br>EAP-Message =<br>0x020800261900170301001b44c1c9880e33cd6e472ba624ff53ee4f53e1588d0da394c02c05
<br>22<br>Message-Authenticator = 0x50fd41edb7beeee318cfd915201602f4<br>Processing the authorize section of radiusd.conf<br>modcall: entering group authorize for request 8<br>modcall[authorize]: module "preprocess" returns ok for request 8
<br>modcall[authorize]: module "chap" returns noop for request 8<br>rlm_realm: No '@' in User-Name = "CSB\test", looking up realm NULL<br>rlm_realm: No such realm "NULL"<br>modcall[authorize]: module "suffix" returns noop for request 8
<br>users: Matched entry DEFAULT at line 165<br>users: Matched entry DEFAULT at line 184<br>modcall[authorize]: module "files" returns ok for request 8<br>rlm_eap: EAP packet type response id 8 length 38<br>rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
<br>modcall[authorize]: module "eap" returns updated for request 8<br>modcall[authorize]: module "mschap" returns noop for request 8<br>modcall: group authorize returns updated for request 8<br>rad_check_password: Found Auth-Type MS-CHAP
<br>rad_check_password: Found Auth-Type EAP<br>Warning: Found 2 auth-types on request for user 'CSB\test'<br>auth: type "EAP"<br>Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 8
<br>rlm_eap: Request found, released from the list<br>rlm_eap: EAP/peap<br>rlm_eap: processing type peap<br>rlm_eap_peap: Authenticate<br>rlm_eap_tls: processing TLS<br>eaptls_verify returned 7<br>rlm_eap_tls: Done initial handshake
<br>eaptls_process returned 7<br>rlm_eap_peap: EAPTLS_OK<br>rlm_eap_peap: Session established. Decoding tunneled attributes.<br>rlm_eap_peap: Received EAP-TLV response.<br>rlm_eap_peap: Tunneled data is valid.<br>rlm_eap_peap: Success
<br>rlm_eap: Freeing handler<br>modcall[authenticate]: module "eap" returns ok for request 8<br>modcall: group authenticate returns ok for request 8<br>Login OK: [CSB\\test/<no User-Password attribute>] (from client reseau16
<br>port 50147 cli 00-04-75-85-8F-61)<br>Sending Access-Accept of id 140 to <a href="http://192.168.16.1:1645">192.168.16.1:1645</a><br>Framed-IP-Address = <a href="http://255.255.255.254">255.255.255.254</a><br>Framed-MTU = 576
<br>Service-Type = Framed-User<br>MS-MPPE-Recv-Key =<br>0xf1a6b62d3814b8fc8f3ac5601a89ddacc1c47c4387e21b35fe33bdbffaf15486<br>MS-MPPE-Send-Key =<br>0x1ba3df6508e8c7f03112980ae8e1255bfec5c05ab397c927a9b56be7335714fd<br>EAP-Message = 0x03080004
<br>Message-Authenticator = 0x00000000000000000000000000000000<br>User-Name = "CSB\\test"<br>Finished request 8<br>Going to the next request<br>Waking up in 6 seconds...<br>--- Walking the entire request list ---
<br>Cleaning up request 0 ID 132 with timestamp 45f0c882<br>Cleaning up request 1 ID 133 with timestamp 45f0c882<br>Cleaning up request 2 ID 134 with timestamp 45f0c882<br>Cleaning up request 3 ID 135 with timestamp 45f0c882
<br>Cleaning up request 4 ID 136 with timestamp 45f0c882<br>Cleaning up request 5 ID 137 with timestamp 45f0c882<br>Cleaning up request 6 ID 138 with timestamp 45f0c882<br>Cleaning up request 7 ID 139 with timestamp 45f0c882
<br>Cleaning up request 8 ID 140 with timestamp 45f0c882<br>Nothing to do. Sleeping until we see a request.<br><br><br>-<br>List info/subscribe/unsubscribe? See<br><a href="http://www.freeradius.org/list/users.html">http://www.freeradius.org/list/users.html
</a><br><br><br><br><br>-<br>List info/subscribe/unsubscribe? See <a href="http://www.freeradius.org/list/users.html">http://www.freeradius.org/list/users.html</a><br></blockquote></div><br>