hi all,<br>i am trying to get autheticated by radius server using EAP-MD5 but i always get FAILURE and i m not able to figure out the problem, can anyone help me out!!!!!<br><br>my client side shows out put like this:-<br>EAPOL: SUPP_BE entering state RESPONSE<br>EAPOL: txSuppRsp<br>TX EAPOL - hexdump(len=17): 01 00 00 0d 02 00 00 0d 01 74 65 73 74 75 73 65 72<br>EAPOL: SUPP_BE entering state RECEIVE<br>RX EAPOL from 00:03:7f:09:60:a0<br>RX EAPOL - hexdump(len=26): 01 00 00 16 01 01 00 16 04 10 e5 b2 63 cb 4e 4f e7 d1 b1 4f 30 95 6c 21 cd a9<br>EAPOL: Received EAP-Packet frame<br>EAPOL: SUPP_BE entering state REQUEST<br>EAPOL: getSuppRsp<br>EAP: EAP entering state RECEIVED<br>EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0<br>EAP: EAP entering state GET_METHOD<br>EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)<br>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected<br>CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63
74 72 6c 5f 31 36 32 37 35 2d 31 00<br>EAP: EAP entering state METHOD<br>EAP-MD5: Challenge - hexdump(len=16): e5 b2 63 cb 4e 4f e7 d1 b1 4f 30 95 6c 21 cd a9<br>EAP-MD5: Generating Challenge Response<br>EAP-MD5: Response - hexdump(len=16): 4a f8 0b fc 31 7e 27 47 ac 95 4c 77 56 30 bf c6<br>EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC<br>EAP: EAP entering state SEND_RESPONSE<br>EAP: EAP entering state IDLE<br>EAPOL: SUPP_BE entering state RESPONSE<br>EAPOL: txSuppRsp<br>TX EAPOL - hexdump(len=26): 01 00 00 16 02 01 00 16 04 10 4a f8 0b fc 31 7e 27 47 ac 95 4c 77 56 30 bf c6<br>EAPOL: SUPP_BE entering state RECEIVE<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface - hexdump_ascii(len=13):<br> 4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53 LIST_NETWORKS<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX EAPOL from 00:03:7f:09:60:a0<br>RX EAPOL - hexdump(len=8): 01 00 00 04 04 01 00 04<br>EAPOL: Received EAP-Packet frame<br>EAPOL: SUPP_BE entering state
REQUEST<br>EAPOL: getSuppRsp<br>EAP: EAP entering state RECEIVED<br>EAP: Received EAP-Failure<br>EAP: EAP entering state DISCARD<br>EAP: EAP entering state IDLE<br>EAPOL: SUPP_BE entering state RECEIVE<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>EAPOL: startWhen --> 0<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55
53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>EAPOL: authWhile --> 0<br>EAPOL: SUPP_BE entering state TIMEOUT<br>EAPOL: SUPP_PAE entering state CONNECTING<br>EAPOL: SUPP_BE entering state IDLE<br>RX EAPOL from 00:03:7f:09:60:a0<br>RX EAPOL - hexdump(len=9): 01 00 00 05 01 02 00 05 01<br>EAPOL: Received EAP-Packet frame<br>EAPOL: SUPP_PAE entering state RESTART<br>EAP: EAP entering state INITIALIZE<br>EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE<br>EAP: EAP entering state IDLE<br>EAPOL: SUPP_PAE entering state AUTHENTICATING<br>EAPOL: SUPP_BE entering state REQUEST<br>EAPOL: getSuppRsp<br>EAP: EAP entering state RECEIVED<br>EAP: Received EAP-Request id=2 method=1 vendor=0 vendorMethod=0<br>EAP: EAP entering state IDENTITY<br>CTRL-EVENT-EAP-STARTED EAP
authentication started<br>CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00<br>EAP: EAP-Request Identity data - hexdump_ascii(len=0):<br>EAP: using real identity - hexdump_ascii(len=8):<br> 74 65 73 74 75 73 65 72 testuser<br>EAP: EAP entering state SEND_RESPONSE<br>EAP: EAP entering state IDLE<br>EAPOL: SUPP_BE entering state RESPONSE<br>EAPOL: txSuppRsp<br>TX EAPOL - hexdump(len=17): 01 00 00 0d 02 02 00 0d 01 74 65 73 74 75 73 65 72<br>EAPOL: SUPP_BE entering state RECEIVE<br>RX EAPOL from 00:03:7f:09:60:a0<br>RX EAPOL - hexdump(len=26): 01 00 00 16 01 03 00 16 04 10 62 2a 69 09 f7 63 b3 30 cf 0b bd 05 83 73 4f 4f<br>EAPOL: Received EAP-Packet frame<br>EAPOL: SUPP_BE entering state REQUEST<br>EAPOL: getSuppRsp<br>EAP: EAP entering
state RECEIVED<br>EAP: Received EAP-Request id=3 method=4 vendor=0 vendorMethod=0<br>EAP: EAP entering state GET_METHOD<br>EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)<br>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected<br>CTRL_IFACE monitor send - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00<br>EAP: EAP entering state METHOD<br>EAP-MD5: Challenge - hexdump(len=16): 62 2a 69 09 f7 63 b3 30 cf 0b bd 05 83 73 4f 4f<br>EAP-MD5: Generating Challenge Response<br>EAP-MD5: Response - hexdump(len=16): bd c1 d1 e3 be 9e 4c 46 7d d1 c0 a3 72 11 b0 ff<br>EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC<br>EAP: EAP entering state SEND_RESPONSE<br>EAP: EAP entering state IDLE<br>EAPOL: SUPP_BE entering state RESPONSE<br>EAPOL: txSuppRsp<br>TX EAPOL - hexdump(len=26): 01 00 00 16 02 03 00 16 04 10 bd c1 d1 e3 be 9e 4c 46 7d d1 c0 a3 72 11 b0 ff<br>EAPOL: SUPP_BE entering state RECEIVE<br>RX
ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface - hexdump_ascii(len=13):<br> 4c 49 53 54 5f 4e 45 54 57 4f 52 4b 53 LIST_NETWORKS<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e
47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>EAPOL: startWhen --> 0<br>RX EAPOL from 00:03:7f:09:60:a0<br>RX EAPOL - hexdump(len=8): 01 00 00 04 04 03 00 04<br>EAPOL: Received EAP-Packet frame<br>EAPOL: SUPP_BE entering state REQUEST<br>EAPOL: getSuppRsp<br>EAP: EAP entering state RECEIVED<br>EAP: Received EAP-Failure<br>EAP: EAP entering state DISCARD<br>EAP: EAP entering state IDLE<br>EAPOL: SUPP_BE entering state RECEIVE<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=6):<br> 53 54 41 54 55 53 STATUS<br>ioctl[SIOCGIFADDR]: Cannot assign requested address<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface -
hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>RX ctrl_iface - hexdump_ascii(len=4):<br> 50 49 4e 47 PING<br>CTRL_IFACE monitor detached - hexdump(len=22): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 31 36 32 37 35 2d 31 00<br>EAPOL: authWhile --> 0<br>EAPOL: SUPP_BE entering state TIMEOUT <br><br>>> i dont know what is this cannot assign requested address,(i am not requesting for any address!!!)<br>my supplicant file is like
this:-<br>ctrl_interface=/var/run/wpa_supplicant<br>ctrl_interface_group=wheel<br>eapol_version=1<br>ap_scan=1<br>fast_reauth=1 <br>network={<br>ssid="ATH182"<br>scan_ssid=1<br>key_mgmt=WPA-EAP<br>eap=MD5<br>identity="testuser"<br>password="whatever"<br>}<br><br><br>>>and correspondingly server side shows message like this:-<br>Starting - reading configuration files ...<br>reread_config: reading radiusd.conf<br>Config: including file: /usr/local/etc/raddb/proxy.conf<br>Config: including file: /usr/local/etc/raddb/clients.conf<br>Config: including file: /usr/local/etc/raddb/snmp.conf<br>Config: including file: /usr/local/etc/raddb/eap.conf<br>Config: including file: /usr/local/etc/raddb/sql.conf<br> main: prefix = "/usr/local"<br> main: localstatedir = "/usr/local/var"<br> main: logdir = "/usr/local/var/log/radius"<br> main: libdir = "/usr/local/lib"<br> main: radacctdir =
"/usr/local/var/log/radius/radacct"<br> main: hostname_lookups = no<br> main: max_request_time = 30<br> main: cleanup_delay = 5<br> main: max_requests = 1024<br> main: delete_blocked_requests = 0<br> main: port = 0<br> main: allow_core_dumps = no<br> main: log_stripped_names = no<br> main: log_file = "/usr/local/var/log/radius/radius.log"<br> main: log_auth = no<br> main: log_auth_badpass = no<br> main: log_auth_goodpass = no<br> main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"<br> main: user = "(null)"<br> main: group = "(null)"<br> main: usercollide = no<br> main: lower_user = "no"<br> main: lower_pass = "no"<br> main: nospace_user = "no"<br> main: nospace_pass = "no"<br> main: checkrad = "/usr/local/sbin/checkrad"<br> main: proxy_requests = yes<br> proxy: retry_delay = 5<br> proxy: retry_count = 3<br> proxy: synchronous =
no<br> proxy: default_fallback = yes<br> proxy: dead_time = 120<br> proxy: post_proxy_authorize = no<br> proxy: wake_all_if_all_dead = no<br> security: max_attributes = 200<br> security: reject_delay = 1<br> security: status_server = no<br> main: debug_level = 0<br>read_config_files: reading dictionary<br>read_config_files: reading naslist<br>Using deprecated naslist file. Support for this will go away soon.<br>read_config_files: reading clients<br>read_config_files: reading realms<br>radiusd: entering modules setup<br>Module: Library search path is /usr/local/lib<br>Module: Loaded exec <br> exec: wait = yes<br> exec: program = "(null)"<br> exec: input_pairs = "request"<br> exec: output_pairs = "(null)"<br> exec: packet_type = "(null)"<br>rlm_exec: Wait=yes but no output defined. Did you mean output=none?<br>Module: Instantiated exec (exec) <br>Module: Loaded expr
<br>Module: Instantiated expr (expr) <br>Module: Loaded PAP <br> pap: encryption_scheme = "crypt"<br> pap: auto_header = yes<br>Module: Instantiated pap (pap) <br>Module: Loaded CHAP <br>Module: Instantiated chap (chap) <br>Module: Loaded MS-CHAP <br> mschap: use_mppe = yes<br> mschap: require_encryption = no<br> mschap: require_strong = no<br> mschap: with_ntdomain_hack = no<br> mschap: passwd = "(null)"<br> mschap: ntlm_auth = "(null)"<br>Module: Instantiated mschap (mschap) <br>Module: Loaded System <br> unix: cache = no<br> unix: passwd = "(null)"<br> unix: shadow = "(null)"<br> unix: group = "(null)"<br> unix: radwtmp = "/usr/local/var/log/radius/radwtmp"<br> unix: usegroup = no<br> unix: cache_reload = 600<br>Module: Instantiated unix (unix) <br>Module: Loaded eap <br> eap: default_eap_type = "md5"<br> eap: timer_expire = 60<br> eap: ignore_unknown_eap_types = no<br> eap:
cisco_accounting_username_bug = no<br>rlm_eap: Loaded and initialized type md5<br>rlm_eap: Loaded and initialized type leap<br> gtc: challenge = "Password: "<br> gtc: auth_type = "PAP"<br>rlm_eap: Loaded and initialized type gtc<br> tls: rsa_key_exchange = no<br> tls: dh_key_exchange = yes<br> tls: rsa_key_length = 512<br> tls: dh_key_length = 512<br> tls: verify_depth = 0<br> tls: CA_path = "(null)"<br> tls: pem_file_type = yes<br> tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem"<br> tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem"<br> tls: CA_file = "/usr/local/etc/raddb/certs/root.pem"<br> tls: private_key_password = "whatever"<br> tls: dh_file = "/usr/local/etc/raddb/certs/dh"<br> tls: random_file = "/usr/local/etc/raddb/certs/random"<br> tls: fragment_size = 1024<br> tls: include_length = yes<br> tls: check_crl = no<br> tls: check_cert_cn =
"(null)"<br> tls: cipher_list = "(null)"<br> tls: check_cert_issuer = "(null)"<br>rlm_eap_tls: Loading the certificate file as a chain<br>rlm_eap: Loaded and initialized type tls<br> mschapv2: with_ntdomain_hack = no<br>rlm_eap: Loaded and initialized type mschapv2<br>Module: Instantiated eap (eap) <br>Module: Loaded preprocess <br> preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"<br> preprocess: hints = "/usr/local/etc/raddb/hints"<br> preprocess: with_ascend_hack = no<br> preprocess: ascend_channels_per_line = 23<br> preprocess: with_ntdomain_hack = no<br> preprocess: with_specialix_jetstream_hack = no<br> preprocess: with_cisco_vsa_hack = no<br> preprocess: with_alvarion_vsa_hack = no<br>Module: Instantiated preprocess (preprocess) <br>Module: Loaded realm <br> realm: format = "suffix"<br> realm: delimiter = "@"<br> realm: ignore_default = no<br> realm: ignore_null = no<br>Module:
Instantiated realm (suffix) <br>Module: Loaded files <br> files: usersfile = "/usr/local/etc/raddb/users"<br> files: acctusersfile = "/usr/local/etc/raddb/acct_users"<br> files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"<br> files: compat = "no"<br>Module: Instantiated files (files) <br>Module: Loaded Acct-Unique-Session-Id <br> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"<br>Module: Instantiated acct_unique (acct_unique) <br>Module: Loaded detail <br> detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"<br> detail: detailperm = 384<br> detail: dirperm = 493<br> detail: locking = no<br>Module: Instantiated detail (detail) <br>Module: Loaded radutmp <br> radutmp: filename = "/usr/local/var/log/radius/radutmp"<br> radutmp: username = "%{User-Name}"<br> radutmp: case_sensitive = yes<br> radutmp: check_with_nas
= yes<br> radutmp: perm = 384<br> radutmp: callerid = yes<br>Module: Instantiated radutmp (radutmp) <br>Listening on authentication *:1812<br>Listening on accounting *:1813<br>Ready to process requests.<br>rad_recv: Access-Request packet from host 192.168.2.183:1079, id=0, length=177<br> Message-Authenticator = 0x48563b978d926b5c042592ec5eae4537<br> Service-Type = Framed-User<br> User-Name = "testuser"<br> Framed-MTU = 1488<br> Called-Station-Id = "00-03-7F-09-60-7E:ATH183"<br> Calling-Station-Id = "00-03-7F-05-C0-9C"<br> NAS-Port-Type = Wireless-802.11<br> Connect-Info = "CONNECT 54Mbps 802.11g"<br> EAP-Message = 0x0200000d017465737475736572<br> NAS-IP-Address = 192.168.2.183<br> NAS-Port = 2<br> NAS-Port-Id = "STA port # 2"<br> Processing the
authorize section of radiusd.conf<br>modcall: entering group authorize for request 0<br> modcall[authorize]: module "preprocess" returns ok for request 0<br> modcall[authorize]: module "chap" returns noop for request 0<br> modcall[authorize]: module "mschap" returns noop for request 0<br> rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL<br> rlm_realm: No such realm "NULL"<br> modcall[authorize]: module "suffix" returns noop for request 0<br> rlm_eap: EAP packet type response id 0 length 13<br> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation<br> modcall[authorize]: module "eap" returns updated for request 0<br> users: Matched entry DEFAULT at line 153<br> users: Matched entry DEFAULT at line 172<br> users: Matched entry testuser at line 216<br> modcall[authorize]: module "files" returns ok for request
0<br>rlm_pap: Found existing Auth-Type, not changing it.<br> modcall[authorize]: module "pap" returns noop for request 0<br>modcall: leaving group authorize (returns updated) for request 0<br> rad_check_password: Found Auth-Type EAP<br>auth: type "EAP"<br> Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 0<br> rlm_eap: EAP Identity<br> rlm_eap: processing type md5<br>rlm_eap_md5: Issuing Challenge<br> modcall[authenticate]: module "eap" returns handled for request 0<br>modcall: leaving group authenticate (returns handled) for request 0<br>Sending Access-Challenge of id 0 to 192.168.2.183 port 1079<br> Framed-IP-Address = 255.255.255.254<br> Framed-MTU = 576<br> Service-Type = Framed-User<br> EAP-Message = 0x010100160410457803a5fc7f8de5ad1e9065c4fec0b0<br> Message-Authenticator =
0x00000000000000000000000000000000<br> State = 0x0eb6726b77f05929d54be6c45de1f52f<br>Finished request 0<br>Going to the next request<br>--- Walking the entire request list ---<br>Waking up in 6 seconds...<br>--- Walking the entire request list ---<br>Cleaning up request 0 ID 0 with timestamp 465abecc<br>Nothing to do. Sleeping until we see a request.<br>rad_recv: Access-Request packet from host 192.168.2.183:1079, id=1, length=204<br> Message-Authenticator = 0xfbcd80decacba158727083a6ca513fac<br> Service-Type = Framed-User<br> User-Name = "testuser"<br> Framed-MTU = 1488<br> State = 0x0eb6726b77f05929d54be6c45de1f52f<br> Called-Station-Id = "00-03-7F-09-60-7E:ATH183"<br> Calling-Station-Id = "00-03-7F-05-C0-9C"<br> NAS-Port-Type = Wireless-802.11<br> Connect-Info = "CONNECT 54Mbps
802.11g"<br> EAP-Message = 0x020100160410b6cac9199b585c8705d9230d18b93094<br> NAS-IP-Address = 192.168.2.183<br> NAS-Port = 2<br> NAS-Port-Id = "STA port # 2"<br> Processing the authorize section of radiusd.conf<br>modcall: entering group authorize for request 1<br> modcall[authorize]: module "preprocess" returns ok for request 1<br> modcall[authorize]: module "chap" returns noop for request 1<br> modcall[authorize]: module "mschap" returns noop for request 1<br> rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL<br> rlm_realm: No such realm "NULL"<br> modcall[authorize]: module "suffix" returns noop for request 1<br> rlm_eap: EAP packet type response id 1 length 22<br> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation<br> modcall[authorize]: module "eap" returns updated for request
1<br> users: Matched entry DEFAULT at line 153<br> users: Matched entry DEFAULT at line 172<br> users: Matched entry testuser at line 216<br> modcall[authorize]: module "files" returns ok for request 1<br>rlm_pap: Found existing Auth-Type, not changing it.<br> modcall[authorize]: module "pap" returns noop for request 1<br>modcall: leaving group authorize (returns updated) for request 1<br> rad_check_password: Found Auth-Type EAP<br>auth: type "EAP"<br> Processing the authenticate section of radiusd.conf<br>modcall: entering group authenticate for request 1<br> rlm_eap: Request found, released from the list<br> rlm_eap: EAP/md5<br> rlm_eap: processing type md5<br> rlm_eap: Freeing handler<br> modcall[authenticate]: module "eap" returns ok for request 1<br>modcall: leaving group authenticate (returns ok) for request 1<br>Sending Access-Accept of id 1 to
192.168.2.183 port 1079<br> Framed-IP-Address = 255.255.255.254<br> Framed-MTU = 576<br> Service-Type = Framed-User<br> EAP-Message = 0x03010004<br> Message-Authenticator = 0x00000000000000000000000000000000<br> User-Name = "testuser"<br>Finished request 1<br>Going to the next request<br>--- Walking the entire request list ---<br>Waking up in 6 seconds...<br>--- Walking the entire request list ---<br>Cleaning up request 1 ID 1 with timestamp 465abee0<br>Nothing to do. Sleeping until we see a request.<br>>><br>can any one help me out it is really important and urgent. <br>if u need i will also tell u my radius.conf, eap.conf and users file!!<br>thank you<br>regards <br>shantanu<br><BR><BR><p>
<hr size=1></hr> Download prohibited? No problem! <a href="http://us.rd.yahoo.com/mail/in/ywebmessenger/*http://in.messenger.yahoo.com/webmessengerpromo.php">CHAT</a> from any browser, without download.