we have restarted that server with this user file,<br>one question i want to ask, what address is the client requesting for which it is failing, where do u thik the problem is?<br><br>regards<br>shantanu<br><br><b><i>tnt@kalik.co.yu</i></b> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> Sorry, didn't see the atach. Have you restarted the server since<br>changing user config? That DEFAULT entry for Framed-User should also<br>match.<br><br>Ivan Kalik<br>Kalik Informatika ISP<br><br><br>Dana 31/5/2007, "shantanu choudhary" <shantanu_843@yahoo.co.in> piše:<br><br>>this is server side output!!!!<br>><br>>rad_recv: Access-Request packet from host 192.168.2.182:1027, id=4, length=177<br>> Message-Authenticator = 0x758e436fc2b17672ad389e0ffeca2982<br>> Service-Type = Framed-User<br>> User-Name = "testuser"<br>> Framed-MTU = 1488<br>> Called-Station-Id
= "00-03-7F-09-60-A0:ATH182"<br>> Calling-Station-Id = "00-03-7F-05-C0-9C"<br>> NAS-Port-Type = Wireless-802.11<br>> Connect-Info = "CONNECT 54Mbps 802.11g"<br>> EAP-Message = 0x0204000d017465737475736572<br>> NAS-IP-Address = 192.168.2.182<br>> NAS-Port = 1<br>> NAS-Port-Id = "STA port # 1"<br>> Processing the authorize section of radiusd.conf<br>>modcall: entering group authorize for request 20<br>> modcall[authorize]: module "preprocess" returns ok for request 20<br>> modcall[authorize]: module "chap" returns noop for request 20<br>> modcall[authorize]: module "mschap" returns noop for request 20<br>> rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL<br>> rlm_realm: No such realm "NULL"<br>> modcall[authorize]: module "suffix" returns noop for request 20<br>> rlm_eap: EAP packet type response id 4 length 13<br>> rlm_eap: No EAP Start,
assuming it's an on-going EAP conversation<br>> modcall[authorize]: module "eap" returns updated for request 20<br>> users: Matched entry testuser at line 155<br>> modcall[authorize]: module "files" returns ok for request 20<br>>rlm_pap: Found existing Auth-Type, not changing it.<br>> modcall[authorize]: module "pap" returns noop for request 20<br>>modcall: leaving group authorize (returns updated) for request 20<br>> rad_check_password: Found Auth-Type EAP<br>>auth: type "EAP"<br>> Processing the authenticate section of radiusd.conf<br>>modcall: entering group authenticate for request 20<br>> rlm_eap: EAP Identity<br>> rlm_eap: processing type md5<br>>rlm_eap_md5: Issuing Challenge<br>> modcall[authenticate]: module "eap" returns handled for request 20<br>>modcall: leaving group authenticate (returns handled) for request 20<br>>Sending Access-Challenge of id 4 to 192.168.2.182 port 1027<br>> EAP-Message
= 0x010500160410ef33bbaf01824abdd6b6989b2cc698ec<br>> Message-Authenticator = 0x00000000000000000000000000000000<br>> State = 0x4f68ec51f7791041fc61be6441d9ea92<br>>Finished request 20<br>>Going to the next request<br>>--- Walking the entire request list ---<br>>Waking up in 6 seconds...<br>>rad_recv: Access-Request packet from host 192.168.2.182:1027, id=5, length=204<br>> Message-Authenticator = 0xb98d04dcd12bbaa2dc7f6314231061bc<br>> Service-Type = Framed-User<br>> User-Name = "testuser"<br>> Framed-MTU = 1488<br>> State = 0x4f68ec51f7791041fc61be6441d9ea92<br>> Called-Station-Id = "00-03-7F-09-60-A0:ATH182"<br>> Calling-Station-Id = "00-03-7F-05-C0-9C"<br>> NAS-Port-Type = Wireless-802.11<br>> Connect-Info = "CONNECT 54Mbps 802.11g"<br>> EAP-Message = 0x020500160410a221ad85e41c1260d31c5d14036dfce1<br>> NAS-IP-Address =
192.168.2.182<br>> NAS-Port = 1<br>> NAS-Port-Id = "STA port # 1"<br>> Processing the authorize section of radiusd.conf<br>>modcall: entering group authorize for request 21<br>> modcall[authorize]: module "preprocess" returns ok for request 21<br>> modcall[authorize]: module "chap" returns noop for request 21<br>> modcall[authorize]: module "mschap" returns noop for request 21<br>> rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL<br>> rlm_realm: No such realm "NULL"<br>> modcall[authorize]: module "suffix" returns noop for request 21<br>> rlm_eap: EAP packet type response id 5 length 22<br>> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation<br>> modcall[authorize]: module "eap" returns updated for request 21<br>> users: Matched entry testuser at line 155<br>> modcall[authorize]: module "files" returns ok for request 21<br>>rlm_pap: Found existing Auth-Type, not
changing it.<br>> modcall[authorize]: module "pap" returns noop for request 21<br>>modcall: leaving group authorize (returns updated) for request 21<br>> rad_check_password: Found Auth-Type EAP<br>>auth: type "EAP"<br>> Processing the authenticate section of radiusd.conf<br>>modcall: entering group authenticate for request 21<br>> rlm_eap: Request found, released from the list<br>> rlm_eap: EAP/md5<br>> rlm_eap: processing type md5<br>> rlm_eap: Freeing handler<br>> modcall[authenticate]: module "eap" returns ok for request 21<br>>modcall: leaving group authenticate (returns ok) for request 21<br>>Sending Access-Accept of id 5 to 192.168.2.182 port 1027<br>> EAP-Message = 0x03050004<br>> Message-Authenticator = 0x00000000000000000000000000000000<br>> User-Name = "testuser"<br>>Finished request 21<br>>Going to the next request<br>>Waking up in 6 seconds...<br>>--- Walking the entire
request list ---<br>><br>>it is sending an access accept packet!!!<br>>my user file is like this:-<br>>its an attachment(users)<br>>thanks for ur help,<br>><br>>regards<br>>shantanu<br>><br>>tnt@kalik.co.yu wrote: Client output isn't showing Access-Accept packet content. Post radiusd<br>>-X output and your users file.<br>><br>>Ivan Kalik<br>>Kalik Informatika ISP<br>><br>><br>>Dana 31/5/2007, "shantanu choudhary" piše:<br>><br>>>hello,<br>>>this is my client side output:<br>>>Authentication with 00:03:7f:09:60:a0 timed out.<br>>>Added BSSID 00:03:7f:09:60:a0 into blacklist<br>>>State: ASSOCIATED -> DISCONNECTED<br>>>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)<br>>>WEXT: Operstate: linkmode=-1, operstate=5<br>>>wpa_driver_wext_disassociate<br>>>No keys have been configured - skip key clearing<br>>>EAPOL: External notification -
portEnabled=0<br>>>EAPOL: SUPP_PAE entering state DISCONNECTED<br>>>EAPOL: SUPP_BE entering state INITIALIZE<br>>>EAP: EAP entering state DISABLED<br>>>EAPOL: External notification - portValid=0<br>>>Setting scan request: 0 sec 0 usec<br>>>State: DISCONNECTED -> SCANNING<br>>>Starting AP scan (specific SSID)<br>>>Scan SSID - hexdump_ascii(len=6):<br>>> 41 54 48 31 38 32 ATH182<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>>>Wireless event: cmd=0x8b15 len=20<br>>>Wireless event: new AP: 00:00:00:00:00:00<br>>>BSSID 00:03:7f:09:60:a0 blacklist count incremented to 2<br>>>CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys<br>>>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>>>wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0<br>>>wpa_driver_wext_set_key: alg=0 key_idx=2
set_tx=0 seq_len=0 key_len=0<br>>>wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0<br>>>wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0<br>>>State: SCANNING -> DISCONNECTED<br>>>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)<br>>>WEXT: Operstate: linkmode=-1, operstate=5<br>>>EAPOL: External notification - portEnabled=0<br>>>EAPOL: External notification - portValid=0<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>>>RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>>>Wireless event: cmd=0x8b19 len=8<br>>>Received 1844 bytes of scan results (7 BSSes)<br>>>Scan results: 7<br>>>Selecting BSS from priority group 0<br>>>0: 00:03:7f:09:60:7e ssid='ATH183' wpa_ie_len=0 rsn_ie_len=22 caps=0x11<br>>> skip - SSID mismatch<br>>>1: 00:03:7f:09:60:a0
ssid='ATH182' wpa_ie_len=0 rsn_ie_len=26 caps=0x11<br>>> skip - blacklisted<br>>>2: 00:18:0a:01:0f:31 ssid='AUKBC_MESH' wpa_ie_len=0 rsn_ie_len=0 caps=0x1<br>>> skip - no WPA/RSN IE<br>>>3: 00:a0:f8:ce:7d:18 ssid='symbol3' wpa_ie_len=0 rsn_ie_len=0 caps=0x1<br>>> skip - no WPA/RSN IE<br>>>4: 00:03:7f:09:60:15 ssid='AUKBC4' wpa_ie_len=0 rsn_ie_len=0 caps=0x1<br>>> skip - no WPA/RSN IE<br>>>5: 00:18:0a:01:03:fe ssid='AUKBC_MESH' wpa_ie_len=0 rsn_ie_len=0 caps=0x1<br>>> skip - no WPA/RSN IE<br>>>6: 00:18:0a:01:07:34 ssid='AUKBC_MESH' wpa_ie_len=0 rsn_ie_len=0 caps=0x1<br>>> skip - no WPA/RSN IE<br>>>No APs found - clear blacklist and try again<br>>>Removed BSSID 00:03:7f:09:60:a0 from blacklist (clear)<br>>>Selecting BSS from priority group 0<br>>>0: 00:03:7f:09:60:7e ssid='ATH183' wpa_ie_len=0 rsn_ie_len=22 caps=0x11<br>>> skip - SSID mismatch<br>>>1:
00:03:7f:09:60:a0 ssid='ATH182' wpa_ie_len=0 rsn_ie_len=26 caps=0x11<br>>> selected based on RSN IE<br>>>Trying to associate with 00:03:7f:09:60:a0 (SSID='ATH182' freq=2437 MHz)<br>>>Cancelling scan request<br>>>WPA: clearing own WPA/RSN IE<br>>>Automatic auth_alg selection: 0x1<br>>>RSN: using IEEE 802.11i/D9.0<br>>>WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2<br>>>WPA: clearing AP WPA IE<br>>>WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 01 00<br>>>WPA: using GTK TKIP<br>>>WPA: using PTK CCMP<br>>>WPA: using KEY_MGMT 802.1X<br>>>WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00<br>>>No keys have been configured - skip key clearing<br>>>wpa_driver_wext_set_drop_unencrypted<br>>>State: DISCONNECTED ->
ASSOCIATING<br>>>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)<br>>>WEXT: Operstate: linkmode=-1, operstate=5<br>>>wpa_driver_wext_associate<br>>>Setting authentication timeout: 10 sec 0 usec<br>>>EAPOL: External notification - portControl=Auto<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>>>Wireless event: cmd=0x8b06 len=8<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>>>Wireless event: cmd=0x8b04 len=12<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])<br>>>Wireless event: cmd=0x8b1a len=14<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])<br>>>Wireless event: cmd=0x8b15 len=20<br>>>Wireless event: new AP: 00:03:7f:09:60:a0<br>>>State: ASSOCIATING -> ASSOCIATED<br>>>wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)<br>>>WEXT: Operstate: linkmode=-1, operstate=5<br>>>Associated to a new BSS:
BSSID=00:03:7f:09:60:a0<br>>>No keys have been configured - skip key clearing<br>>>Associated with 00:03:7f:09:60:a0<br>>>WPA: Association event - clear replay counter<br>>>EAPOL: External notification - portEnabled=0<br>>>EAPOL: External notification - portValid=0<br>>>EAPOL: External notification - portEnabled=1<br>>>EAPOL: SUPP_PAE entering state CONNECTING<br>>>EAPOL: SUPP_BE entering state IDLE<br>>>EAP: EAP entering state INITIALIZE<br>>>EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE<br>>>EAP: EAP entering state IDLE<br>>>Setting authentication timeout: 10 sec 0 usec<br>>>Cancelling scan request<br>>>RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])<br>>>RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01<br>>>Setting authentication
timeout: 70 sec 0 usec<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_PAE entering state RESTART<br>>>EAP: EAP entering state INITIALIZE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_PAE entering state AUTHENTICATING<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0<br>>>EAP: EAP entering state IDENTITY<br>>>CTRL-EVENT-EAP-STARTED EAP authentication started<br>>>EAP: EAP-Request Identity data - hexdump_ascii(len=0):<br>>>EAP: using real identity - hexdump_ascii(len=8):<br>>> 74 65 73 74 75 73 65 72 testuser<br>>>EAP: EAP entering state SEND_RESPONSE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RESPONSE<br>>>EAPOL: txSuppRsp<br>>>TX EAPOL - hexdump(len=17): 01 00 00 0d 02 00
00 0d 01 74 65 73 74 75 73 65 72<br>>>EAPOL: SUPP_BE entering state RECEIVE<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=26): 01 00 00 16 01 01 00 16 04 10 6d db 12 c2 ff 1f c6 22 64 45 01 07 f9 73 8b 14<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0<br>>>EAP: EAP entering state GET_METHOD<br>>>EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)<br>>>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected<br>>>EAP: EAP entering state METHOD<br>>>EAP-MD5: Challenge - hexdump(len=16): 6d db 12 c2 ff 1f c6 22 64 45 01 07 f9 73 8b 14<br>>>EAP-MD5: Generating Challenge Response<br>>>EAP-MD5: Response - hexdump(len=16): e8 5f fa a3 fe 5d 10 a6 4a 65 11 6d f0 25 19 35<br>>>EAP: method process
-> ignore=FALSE methodState=DONE decision=UNCOND_SUCC<br>>>EAP: EAP entering state SEND_RESPONSE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RESPONSE<br>>>EAPOL: txSuppRsp<br>>>TX EAPOL - hexdump(len=26): 01 00 00 16 02 01 00 16 04 10 e8 5f fa a3 fe 5d 10 a6 4a 65 11 6d f0 25 19 35<br>>>EAPOL: SUPP_BE entering state RECEIVE<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=8): 01 00 00 04 04 01 00 04<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Failure<br>>>EAP: EAP entering state DISCARD<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RECEIVE<br>>>EAPOL: startWhen --> 0<br>>>EAPOL: authWhile --> 0<br>>>EAPOL: SUPP_BE entering state TIMEOUT<br>>>EAPOL: SUPP_PAE
entering state CONNECTING<br>>>EAPOL: SUPP_BE entering state IDLE<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=9): 01 00 00 05 01 02 00 05 01<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_PAE entering state RESTART<br>>>EAP: EAP entering state INITIALIZE<br>>>EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_PAE entering state AUTHENTICATING<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Request id=2 method=1 vendor=0 vendorMethod=0<br>>>EAP: EAP entering state IDENTITY<br>>>CTRL-EVENT-EAP-STARTED EAP authentication started<br>>>EAP: EAP-Request Identity data - hexdump_ascii(len=0):<br>>>EAP: using real identity - hexdump_ascii(len=8):<br>>> 74 65 73 74 75 73 65 72
testuser<br>>>EAP: EAP entering state SEND_RESPONSE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RESPONSE<br>>>EAPOL: txSuppRsp<br>>>TX EAPOL - hexdump(len=17): 01 00 00 0d 02 02 00 0d 01 74 65 73 74 75 73 65 72<br>>>EAPOL: SUPP_BE entering state RECEIVE<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=26): 01 00 00 16 01 03 00 16 04 10 68 c8 ea 0c 97 f7 11 d3 f3 2a cd 62 8c 37 4d 40<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Request id=3 method=4 vendor=0 vendorMethod=0<br>>>EAP: EAP entering state GET_METHOD<br>>>EAP: Initialize selected EAP method: vendor 0 method 4 (MD5)<br>>>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected<br>>>EAP: EAP entering state METHOD<br>>>EAP-MD5: Challenge -
hexdump(len=16): 68 c8 ea 0c 97 f7 11 d3 f3 2a cd 62 8c 37 4d 40<br>>>EAP-MD5: Generating Challenge Response<br>>>EAP-MD5: Response - hexdump(len=16): 03 76 fc e7 ce bc 66 b6 cd 50 2a 73 b3 cf eb 93<br>>>EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC<br>>>EAP: EAP entering state SEND_RESPONSE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RESPONSE<br>>>EAPOL: txSuppRsp<br>>>TX EAPOL - hexdump(len=26): 01 00 00 16 02 03 00 16 04 10 03 76 fc e7 ce bc 66 b6 cd 50 2a 73 b3 cf eb 93<br>>>EAPOL: SUPP_BE entering state RECEIVE<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=8): 01 00 00 04 04 03 00 04<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Failure<br>>>EAP: EAP entering state
DISCARD<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RECEIVE<br>>>EAPOL: startWhen --> 0<br>>>EAPOL: authWhile --> 0<br>>>EAPOL: SUPP_BE entering state TIMEOUT<br>>>EAPOL: SUPP_PAE entering state CONNECTING<br>>>EAPOL: SUPP_BE entering state IDLE<br>>>RX EAPOL from 00:03:7f:09:60:a0<br>>>RX EAPOL - hexdump(len=9): 01 00 00 05 01 04 00 05 01<br>>>EAPOL: Received EAP-Packet frame<br>>>EAPOL: SUPP_PAE entering state RESTART<br>>>EAP: EAP entering state INITIALIZE<br>>>EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_PAE entering state AUTHENTICATING<br>>>EAPOL: SUPP_BE entering state REQUEST<br>>>EAPOL: getSuppRsp<br>>>EAP: EAP entering state RECEIVED<br>>>EAP: Received EAP-Request id=4 method=1 vendor=0 vendorMethod=0<br>>>EAP: EAP entering state
IDENTITY<br>>>CTRL-EVENT-EAP-STARTED EAP authentication started<br>>>EAP: EAP-Request Identity data - hexdump_ascii(len=0):<br>>>EAP: using real identity - hexdump_ascii(len=8):<br>>> 74 65 73 74 75 73 65 72 testuser<br>>>EAP: EAP entering state SEND_RESPONSE<br>>>EAP: EAP entering state IDLE<br>>>EAPOL: SUPP_BE entering state RESPONSE<br>>><br>>><br>>>the problem is i am getting EAP-FAILURE on client side even when server is giving ACCESS-ACCEPT!!!!<br>>>i am not able to figure out the problem output of server is same as that in earlier mail,<br>>>one more thing what will be end message of this, will it be authentication or association? When i run GUI for supplicant it is showing associated not authenticated! is it end of connection and after it should i get an IP from that AP, even if i try for DHCP i am not able to get an IP!!!!<br>>>it is all messed up, please do
reply for this prob!!!<br>>>regards<br>>>shantanu<br>>><br>>>tnt@kalik.co.yu wrote: Well, now you dont have any IP address in your accept packet. Not a<br>>>problem if you are doing DHCP. Otherwise you need to return IP address,<br>>>netmask, MTU, Service-Type, DNS servers etc.<br>>><br>>>Leave that Framed-User DEFAULT entry alone - it should be there. You need<br>>>to add stuff to your user config:<br>>><br>>>testuser Cleartext-Password:=yourpassword<br>>> Framed-IP-Address=1.2.3.4<br>>> Framed-MTU=yourMTU<br>>> Framed-IP-Netmask=255.255.255.255<br>>>etc.<br>>><br>>>Ivan Kalik<br>>>Kalik Informatika ISP<br>>><br>>><br>>>Dana 30/5/2007, "shantanu choudhary" piše:<br>>><br>>>--- snip ---<br>>>>Sending Access-Accept of id 2 to 192.168.2.182 port 1028<br>>>>
EAP-Message = 0x03020004<br>>>> Message-Authenticator = 0x00000000000000000000000000000000<br>>>> User-Name = "testuser"<br>>>>Finished request 1<br>>>>Going to the next request<br>>>>Waking up in 6 seconds...<br>>>>--- Walking the entire request list ---<br>>>>Cleaning up request 0 ID 1 with timestamp 465d506e<br>>>>Cleaning up request 1 ID 2 with timestamp 465d506e<br>>>>Nothing to do. Sleeping until we see a request.<br>>>><br>>>>it is sending ACCESS ACCEPT but no access reject or failure!!!!<br>>>>and when i try to check AP statistics from server it is showing an entry for AUTHENTICATION FAILURE!!!!!!!<br>>>><br>>>>sorry for disturbing u again n again but can u help me out????<br>>>>please!!<br>>>>shantanu<br>>>><br>>><br>>>-<br>>>List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html<br>>><br>>><br>>><br>>><br>>><br>>>---------------------------------<br>>> Did you know? You can CHAT without downloading messenger. Know how!<br>>><br>><br>>-<br>>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html<br>><br>><br>><br>><br>><br>>---------------------------------<br>> Download prohibited? No problem! CHAT from any browser, without download.<br>><br><br>- <br>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html<br></shantanu_843@yahoo.co.in></blockquote><br><p>
<hr size=1></hr> Download prohibited? No problem! <a href="http://us.rd.yahoo.com/mail/in/ywebmessenger/*http://in.messenger.yahoo.com/webmessengerpromo.php">CHAT</a> from any browser, without download.