Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=15, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x5a182f352c049521904faaf466c11633 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 276 NAS-Port-Id = "276" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 0 modcall: leaving group authenticate (returns invalid) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=15, length=126 Sending Access-Reject of id 15 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 15 with timestamp 46c188ec Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=16, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xf29742fb73dd8adb0167f0a40463cd8d EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 278 NAS-Port-Id = "278" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 1 modcall: leaving group authenticate (returns invalid) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=16, length=126 Sending Access-Reject of id 16 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 16 with timestamp 46c18918 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=17, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xa68d58e45af8ef4dc0e247957cd0940b EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 279 NAS-Port-Id = "279" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 2 modcall: leaving group authenticate (returns invalid) for request 2 auth: Failed to validate the user. Delaying request 2 for 1 seconds Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=17, length=126 Sending Access-Reject of id 17 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 17 with timestamp 46c1894a Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=18, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xb42bdde2fb8ab42d4833ca1615d3654a EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 281 NAS-Port-Id = "281" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 3 modcall: leaving group authenticate (returns invalid) for request 3 auth: Failed to validate the user. Delaying request 3 for 1 seconds Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=18, length=126 Sending Access-Reject of id 18 to 10.100.1.101 port 1645 Waking up in 1 seconds... rad_recv: Accounting-Request packet from host 10.100.1.101:1646, id=2, length=105 Acct-Session-Id = "00000002" User-Name = "dkupis" Acct-Authentic = RADIUS Acct-Terminate-Cause = Idle-Timeout Acct-Session-Time = 808 Acct-Status-Type = Stop NAS-Port = 0 NAS-Port-Id = "tty0" NAS-Port-Type = Async Calling-Station-Id = "async" Service-Type = NAS-Prompt-User NAS-IP-Address = 10.100.1.101 Acct-Delay-Time = 0 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 4 modcall[preacct]: module "preprocess" returns noop for request 4 rlm_acct_unique: Hashing 'NAS-Port = 0,Client-IP-Address = 10.100.1.101,NAS-IP-Address = 10.100.1.101,Acct-Session-Id = "00000002",User-Name = "dkupis"' rlm_acct_unique: Acct-Unique-Session-ID = "9e2697c3111e922f". modcall[preacct]: module "acct_unique" returns ok for request 4 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 4 modcall[preacct]: module "files" returns noop for request 4 modcall: leaving group preacct (returns ok) for request 4 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 4 radius_xlat: '/usr/local/var/log/radius/radacct/10.100.1.101/detail-20070814' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/10.100.1.101/detail-20070814 modcall[accounting]: module "detail" returns ok for request 4 modcall[accounting]: module "unix" returns ok for request 4 radius_xlat: '/usr/local/var/log/radius/radutmp' radius_xlat: 'dkupis' modcall[accounting]: module "radutmp" returns ok for request 4 modcall: leaving group accounting (returns ok) for request 4 Sending Accounting-Response of id 2 to 10.100.1.101 port 1646 Finished request 4 Going to the next request --- Walking the entire request list --- Waking up in 4 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=19, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xa31141a1a516aaf50692090d4c62df8d EAP-Message = 0x0201000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 282 NAS-Port-Id = "282" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 5 modcall: leaving group authenticate (returns invalid) for request 5 auth: Failed to validate the user. Delaying request 5 for 1 seconds Finished request 5 Going to the next request Waking up in 4 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=19, length=126 Sending Access-Reject of id 19 to 10.100.1.101 port 1645 --- Walking the entire request list --- Waking up in 3 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=20, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x6210a182aa0b093ca68ac7aaa2a99b9e EAP-Message = 0x0201000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 283 NAS-Port-Id = "283" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 6 modcall: leaving group authenticate (returns invalid) for request 6 auth: Failed to validate the user. Delaying request 6 for 1 seconds Finished request 6 Going to the next request Waking up in 3 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=20, length=126 Sending Access-Reject of id 20 to 10.100.1.101 port 1645 --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 18 with timestamp 46c1897c Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 4 ID 2 with timestamp 46c1897e Cleaning up request 5 ID 19 with timestamp 46c1897e Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 6 ID 20 with timestamp 46c1897f Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=21, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xef73a8fd50d86c7e43630c0724c59220 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 284 NAS-Port-Id = "284" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 7 modcall: leaving group authenticate (returns invalid) for request 7 auth: Failed to validate the user. Delaying request 7 for 1 seconds Finished request 7 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=21, length=126 Sending Access-Reject of id 21 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 7 ID 21 with timestamp 46c189b0 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=22, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xa5646438d63cff38cba64e6b014cf884 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 286 NAS-Port-Id = "286" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 modcall[authorize]: module "preprocess" returns ok for request 8 modcall[authorize]: module "chap" returns noop for request 8 modcall[authorize]: module "mschap" returns noop for request 8 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 8 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 8 modcall: leaving group authorize (returns updated) for request 8 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 8 modcall: leaving group authenticate (returns invalid) for request 8 auth: Failed to validate the user. Delaying request 8 for 1 seconds Finished request 8 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=22, length=126 Sending Access-Reject of id 22 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 8 ID 22 with timestamp 46c189de Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=23, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x6dc5bc710871485e1f6de042037e89b7 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 288 NAS-Port-Id = "288" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 9 modcall[authorize]: module "preprocess" returns ok for request 9 modcall[authorize]: module "chap" returns noop for request 9 modcall[authorize]: module "mschap" returns noop for request 9 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 9 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 9 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 9 modcall: leaving group authorize (returns updated) for request 9 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 9 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 9 modcall: leaving group authenticate (returns invalid) for request 9 auth: Failed to validate the user. Delaying request 9 for 1 seconds Finished request 9 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=23, length=126 Sending Access-Reject of id 23 to 10.100.1.101 port 1645 Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=24, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xf85547f5563e91c12c68dcd97e2a8bc9 EAP-Message = 0x0201000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 289 NAS-Port-Id = "289" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 10 modcall[authorize]: module "preprocess" returns ok for request 10 modcall[authorize]: module "chap" returns noop for request 10 modcall[authorize]: module "mschap" returns noop for request 10 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 10 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 10 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 10 modcall: leaving group authorize (returns updated) for request 10 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 10 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 10 modcall: leaving group authenticate (returns invalid) for request 10 auth: Failed to validate the user. Delaying request 10 for 1 seconds Finished request 10 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=24, length=126 Sending Access-Reject of id 24 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 9 ID 23 with timestamp 46c18a10 Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 10 ID 24 with timestamp 46c18a12 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=25, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xc08235d13d8393acb91a6f06fa7418ed EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 290 NAS-Port-Id = "290" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 11 modcall[authorize]: module "preprocess" returns ok for request 11 modcall[authorize]: module "chap" returns noop for request 11 modcall[authorize]: module "mschap" returns noop for request 11 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 11 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 11 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 11 modcall: leaving group authorize (returns updated) for request 11 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 11 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 11 modcall: leaving group authenticate (returns invalid) for request 11 auth: Failed to validate the user. Delaying request 11 for 1 seconds Finished request 11 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=25, length=126 Sending Access-Reject of id 25 to 10.100.1.101 port 1645 Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=26, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xa38a3c11cd3ed06b97e59eb642f3840a EAP-Message = 0x0201000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 291 NAS-Port-Id = "291" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 12 modcall[authorize]: module "preprocess" returns ok for request 12 modcall[authorize]: module "chap" returns noop for request 12 modcall[authorize]: module "mschap" returns noop for request 12 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 12 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 12 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 12 modcall: leaving group authorize (returns updated) for request 12 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 12 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 12 modcall: leaving group authenticate (returns invalid) for request 12 auth: Failed to validate the user. Delaying request 12 for 1 seconds Finished request 12 Going to the next request Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=26, length=126 Sending Access-Reject of id 26 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 3 seconds... --- Walking the entire request list --- Cleaning up request 11 ID 25 with timestamp 46c18a43 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 12 ID 26 with timestamp 46c18a44 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=27, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xb75ee696f7ee04500eb7a94e01b80a28 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 292 NAS-Port-Id = "292" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 13 modcall[authorize]: module "preprocess" returns ok for request 13 modcall[authorize]: module "chap" returns noop for request 13 modcall[authorize]: module "mschap" returns noop for request 13 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 13 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 13 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 13 modcall: leaving group authorize (returns updated) for request 13 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 13 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 13 modcall: leaving group authenticate (returns invalid) for request 13 auth: Failed to validate the user. Delaying request 13 for 1 seconds Finished request 13 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=27, length=126 Sending Access-Reject of id 27 to 10.100.1.101 port 1645 Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=28, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xe97c74dd183186a0d21c26525c15a601 EAP-Message = 0x0201000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 293 NAS-Port-Id = "293" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 14 modcall[authorize]: module "preprocess" returns ok for request 14 modcall[authorize]: module "chap" returns noop for request 14 modcall[authorize]: module "mschap" returns noop for request 14 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 14 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 14 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 14 modcall: leaving group authorize (returns updated) for request 14 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 14 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 14 modcall: leaving group authenticate (returns invalid) for request 14 auth: Failed to validate the user. Delaying request 14 for 1 seconds Finished request 14 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=28, length=126 Sending Access-Reject of id 28 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 13 ID 27 with timestamp 46c18a62 Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 14 ID 28 with timestamp 46c18a64 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=29, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x3f6ff22f3c8fe613ebc90b3a892ce723 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 294 NAS-Port-Id = "294" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 15 modcall[authorize]: module "preprocess" returns ok for request 15 modcall[authorize]: module "chap" returns noop for request 15 modcall[authorize]: module "mschap" returns noop for request 15 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 15 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 15 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 15 modcall: leaving group authorize (returns updated) for request 15 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 15 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 15 modcall: leaving group authenticate (returns invalid) for request 15 auth: Failed to validate the user. Delaying request 15 for 1 seconds Finished request 15 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=29, length=126 Sending Access-Reject of id 29 to 10.100.1.101 port 1645 --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 15 ID 29 with timestamp 46c18a94 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=30, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x9babd576d0b6772b3de690119eb9b76e EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 296 NAS-Port-Id = "296" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 16 modcall[authorize]: module "preprocess" returns ok for request 16 modcall[authorize]: module "chap" returns noop for request 16 modcall[authorize]: module "mschap" returns noop for request 16 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 16 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 16 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 16 modcall: leaving group authorize (returns updated) for request 16 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 16 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 16 modcall: leaving group authenticate (returns invalid) for request 16 auth: Failed to validate the user. Delaying request 16 for 1 seconds Finished request 16 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=30, length=126 Sending Access-Reject of id 30 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 16 ID 30 with timestamp 46c18ac7 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=31, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x46605b7b43e78d196430f4fd6d95c3d9 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 298 NAS-Port-Id = "298" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 17 modcall[authorize]: module "preprocess" returns ok for request 17 modcall[authorize]: module "chap" returns noop for request 17 modcall[authorize]: module "mschap" returns noop for request 17 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 17 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 17 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 17 modcall: leaving group authorize (returns updated) for request 17 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 17 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 17 modcall: leaving group authenticate (returns invalid) for request 17 auth: Failed to validate the user. Delaying request 17 for 1 seconds Finished request 17 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=31, length=126 Sending Access-Reject of id 31 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 17 ID 31 with timestamp 46c18ae6 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=32, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xbbb20ec11f4ad2760a2e7304e8efb492 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 299 NAS-Port-Id = "299" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 18 modcall[authorize]: module "preprocess" returns ok for request 18 modcall[authorize]: module "chap" returns noop for request 18 modcall[authorize]: module "mschap" returns noop for request 18 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 18 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 18 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 18 modcall: leaving group authorize (returns updated) for request 18 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 18 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 18 modcall: leaving group authenticate (returns invalid) for request 18 auth: Failed to validate the user. Delaying request 18 for 1 seconds Finished request 18 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=32, length=126 Sending Access-Reject of id 32 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 18 ID 32 with timestamp 46c18b18 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=33, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0xa61274fe4ba2b6b7d24371b62c344f97 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 301 NAS-Port-Id = "301" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 19 modcall[authorize]: module "preprocess" returns ok for request 19 modcall[authorize]: module "chap" returns noop for request 19 modcall[authorize]: module "mschap" returns noop for request 19 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 19 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 19 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 19 modcall: leaving group authorize (returns updated) for request 19 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 19 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 19 modcall: leaving group authenticate (returns invalid) for request 19 auth: Failed to validate the user. Delaying request 19 for 1 seconds Finished request 19 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=33, length=126 Sending Access-Reject of id 33 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 19 ID 33 with timestamp 46c18b4a Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.100.1.101:1645, id=34, length=126 User-Name = "dkupis" Framed-MTU = 1400 Called-Station-Id = "001a.e375.6cc0" Calling-Station-Id = "000e.9bc3.e2d4" Service-Type = Login-User Message-Authenticator = 0x14d3d399f80b45f6b1c3165f0c99ce67 EAP-Message = 0x0202000b01646b75706973 NAS-Port-Type = Wireless-802.11 NAS-Port = 303 NAS-Port-Id = "303" NAS-IP-Address = 10.100.1.101 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 20 modcall[authorize]: module "preprocess" returns ok for request 20 modcall[authorize]: module "chap" returns noop for request 20 modcall[authorize]: module "mschap" returns noop for request 20 rlm_realm: No '@' in User-Name = "dkupis", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 20 rlm_eap: EAP packet type response id 2 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 20 users: Matched entry dkupis at line 1 modcall[authorize]: module "files" returns ok for request 20 modcall: leaving group authorize (returns updated) for request 20 rad_check_password: Found Auth-Type system auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 20 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 20 modcall: leaving group authenticate (returns invalid) for request 20 auth: Failed to validate the user. Delaying request 20 for 1 seconds Finished request 20 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.100.1.101:1645, id=34, length=126 Sending Access-Reject of id 34 to 10.100.1.101 port 1645 Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 20 ID 34 with timestamp 46c18b6a Nothing to do. Sleeping until we see a request.