>You are asking your questions on a wrong list. There is nothing you can<br>
>do on a radius server in order to get those attributes if radius client<br>
>is not sending Digest-Attributes. Direct your question to SER server<br>>support.<br><br>hi Kalik,<br> After I've done some changes in dictionary of radius server I can see the output sending digest attributes from the client, but still i didn't get the values at the radius server. Is it the problem of my configuration of radius server or it may be some other client configuration. Please advice, sorry for posting the same question again.<br>
<br> Please tell me the possible problems of not getting these values:<br>
'Digest-User-name', 'Digest-Realm', 'Digest-Method', 'Digest-Uri', 'Digest-Nonce', 'Digest-Response'<br><br><br>
<br>here is the full output when I run in debug mode<br><br>rad_recv: Access-Request packet from host <a href="http://192.168.1.227">192.168.1.227</a> port 33093, id=86, length=271<br> User-Name = "<a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a>"<br>
Digest-Attributes = 0x0a096a6f686e736f6e<br> Digest-Attributes = 0x010f3139322e3136382e312e323237<br> Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439<br>
Digest-Attributes = 0x04137369703a3139322e3136382e312e323237<br> Digest-Attributes = 0x030a5245474953544552<br> Digest-Response = "b8f4759b0c4462aaa56edd1794da872a"<br> Service-Type = Sip-Session<br>
Sip-Uri-User = "johnson"<br> Cisco-AVPair = "call-id=<a href="mailto:bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193">bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193</a>"<br> NAS-IP-Address = <a href="http://127.0.0.1">127.0.0.1</a><br>
NAS-Port = 5060<br>+- entering group authorize<br>++[preprocess] returns ok<br>perl_pool: item 0x89260f0 asigned new request. Handled so far: 1<br>found interpetator at address 0x89260f0<br>rlm_perl: ###############################################################<br>
rlm_perl: RAD_REQUEST: Digest-Response = b8f4759b0c4462aaa56edd1794da872a<br>rlm_perl: RAD_REQUEST: Service-Type = Sip-Session<br>rlm_perl: RAD_REQUEST: Cisco-AVPair = call-id=<a href="mailto:bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193">bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193</a><br>
rlm_perl: RAD_REQUEST: User-Name = <a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a><br>rlm_perl: RAD_REQUEST: Sip-Uri-User = johnson<br>rlm_perl: RAD_REQUEST: NAS-IP-Address = <a href="http://127.0.0.1">127.0.0.1</a><br>
rlm_perl: RAD_REQUEST: NAS-Port = 5060<br>rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x89dd638)<br>rlm_perl: ###############################################################<br>rlm_perl: Added pair Digest-Response = b8f4759b0c4462aaa56edd1794da872a<br>
rlm_perl: Added pair Service-Type = Sip-Session<br>rlm_perl: Added pair Cisco-AVPair = call-id=<a href="mailto:bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193">bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193</a><br>rlm_perl: Added pair User-Name = <a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a><br>
rlm_perl: Added pair Sip-Uri-User = johnson<br>rlm_perl: Added pair NAS-IP-Address = <a href="http://127.0.0.1">127.0.0.1</a><br>rlm_perl: Added pair NAS-Port = 5060<br>rlm_perl: Added pair Digest-Attributes = 0x0a096a6f686e736f6e<br>
rlm_perl: Added pair Digest-Attributes = 0x010f3139322e3136382e312e323237<br>rlm_perl: Added pair Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439<br>rlm_perl: Added pair Digest-Attributes = 0x04137369703a3139322e3136382e312e323237<br>
rlm_perl: Added pair Digest-Attributes = 0x030a5245474953544552<br>rlm_perl: Added pair Reply-Message = Incorrect Password<br>perl_pool total/active/spare [32/0/32]<br>Unreserve perl at address 0x89260f0<br>++[perl] returns reject<br>
Invalid user: [<a href="http://johnson@192.168.1.227/">johnson@192.168.1.227/</a><no User-Password attribute>] (from client <a href="http://192.168.1.227">192.168.1.227</a> port 5060)<br> Found Post-Auth-Type Reject<br>
+- entering group REJECT<br> expand: %{User-Name} -> <a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a><br> attr_filter: Matched entry DEFAULT at line 11<br>++[attr_filter.access_reject] returns updated<br>
Delaying reject of request 2 for 1 seconds<br>Going to the next request<br>Waking up in 0.9 seconds.<br>rad_recv: Access-Request packet from host <a href="http://192.168.1.227">192.168.1.227</a> port 33094, id=87, length=271<br>
User-Name = "<a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a>"<br> Digest-Attributes = 0x0a096a6f686e736f6e<br> Digest-Attributes = 0x010f3139322e3136382e312e323237<br> Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439<br>
Digest-Attributes = 0x04137369703a3139322e3136382e312e323237<br> Digest-Attributes = 0x030a5245474953544552<br> Digest-Response = "b8f4759b0c4462aaa56edd1794da872a"<br> Service-Type = Sip-Session<br>
Sip-Uri-User = "johnson"<br> Cisco-AVPair = "call-id=<a href="mailto:bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193">bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193</a>"<br> NAS-IP-Address = <a href="http://127.0.0.1">127.0.0.1</a><br>
NAS-Port = 5060<br>+- entering group authorize<br>++[preprocess] returns ok<br>perl_pool: item 0x8a20548 asigned new request. Handled so far: 1<br>found interpetator at address 0x8a20548<br>rlm_perl: ###############################################################<br>
rlm_perl: RAD_REQUEST: Digest-Response = b8f4759b0c4462aaa56edd1794da872a<br>rlm_perl: RAD_REQUEST: Service-Type = Sip-Session<br>rlm_perl: RAD_REQUEST: Cisco-AVPair = call-id=<a href="mailto:bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193">bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193</a><br>
rlm_perl: RAD_REQUEST: User-Name = <a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a><br>rlm_perl: RAD_REQUEST: Sip-Uri-User = johnson<br>rlm_perl: RAD_REQUEST: NAS-IP-Address = <a href="http://127.0.0.1">127.0.0.1</a><br>
rlm_perl: RAD_REQUEST: NAS-Port = 5060<br>rlm_perl: RAD_REQUEST: Digest-Attributes = ARRAY(0x8ab7bd0)<br>rlm_perl: ###############################################################<br>rlm_perl: Added pair Digest-Response = b8f4759b0c4462aaa56edd1794da872a<br>
rlm_perl: Added pair Service-Type = Sip-Session<br>rlm_perl: Added pair Cisco-AVPair = call-id=<a href="mailto:bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193">bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193</a><br>rlm_perl: Added pair User-Name = <a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a><br>
rlm_perl: Added pair Sip-Uri-User = johnson<br>rlm_perl: Added pair NAS-IP-Address = <a href="http://127.0.0.1">127.0.0.1</a><br>rlm_perl: Added pair NAS-Port = 5060<br>rlm_perl: Added pair Digest-Attributes = 0x0a096a6f686e736f6e<br>
rlm_perl: Added pair Digest-Attributes = 0x010f3139322e3136382e312e323237<br>rlm_perl: Added pair Digest-Attributes = 0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439<br>rlm_perl: Added pair Digest-Attributes = 0x04137369703a3139322e3136382e312e323237<br>
rlm_perl: Added pair Digest-Attributes = 0x030a5245474953544552<br>rlm_perl: Added pair Reply-Message = Incorrect Password<br>perl_pool total/active/spare [32/0/32]<br>Unreserve perl at address 0x8a20548<br>++[perl] returns reject<br>
Invalid user: [<a href="http://johnson@192.168.1.227/">johnson@192.168.1.227/</a><no User-Password attribute>] (from client <a href="http://192.168.1.227">192.168.1.227</a> port 5060)<br> Found Post-Auth-Type Reject<br>
+- entering group REJECT<br> expand: %{User-Name} -> <a href="mailto:johnson@192.168.1.227">johnson@192.168.1.227</a><br> attr_filter: Matched entry DEFAULT at line 11<br>++[attr_filter.access_reject] returns updated<br>
Delaying reject of request 3 for 1 seconds<br>Going to the next request<br>Waking up in 0.4 seconds.<br>Sending delayed reject for request 2<br>Sending Access-Reject of id 86 to <a href="http://192.168.1.227">192.168.1.227</a> port 33093<br>
Reply-Message = "Incorrect Password"<br>Waking up in 0.4 seconds.<br>Sending delayed reject for request 3<br>Sending Access-Reject of id 87 to <a href="http://192.168.1.227">192.168.1.227</a> port 33094<br>
Reply-Message = "Incorrect Password"<br>Waking up in 4.5 seconds.<br>Cleaning up request 2 ID 86 with timestamp +9<br>Waking up in 0.4 seconds.<br>Cleaning up request 3 ID 87 with timestamp +10<br>Ready to process requests.<br>
<br><br>Thanks and Regards<br>Elangbam Johnson<br>