rad_recv: Access-Request packet from host 192.168.0.1:49152, id=29, length=171
        NAS-IP-Address = 169.254.1.3
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        Framed-MTU = 1400
        User-Name = "aricent"
        Calling-Station-Id = "00-90-4B-0A-D5-EF"
        Called-Station-Id = "00-19-E1-F0-9B-CE"
        NAS-Identifier = "Enterprise Wireless AP"
        EAP-Message = 0x0201000c0161726963656e74
        Message-Authenticator = 0x57c85b81701129495162f36aef069549
        Proxy-State = 0x0402a9fe01031b272cc14c1336040fc84dcd0a33456e
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
  modcall[authorize]: module "preprocess" returns ok for request 0
  rlm_eap: EAP packet type response id 1 length 12
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    rlm_realm: No '@' in User-Name = "aricent", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
    users: Matched entry aricent at line 117
  modcall[authorize]: module "files" returns ok for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
modcall: leaving group authorize (returns updated) for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group EAP for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: leaving group EAP (returns handled) for request 0
Sending Access-Challenge of id 29 to 192.168.0.1 port 49152
        EAP-Message = 0x010200061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0bc65ca2c6ba57161ed09aee31beac1e
        Proxy-State = 0x0402a9fe01031b272cc14c1336040fc84dcd0a33456e
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.1:49152, id=30, length=285
        NAS-IP-Address = 169.254.1.3
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        Framed-MTU = 1400
        User-Name = "aricent"
        Calling-Station-Id = "00-90-4B-0A-D5-EF"
        Called-Station-Id = "00-19-E1-F0-9B-CE"
        NAS-Identifier = "Enterprise Wireless AP"
        State = 0x0bc65ca2c6ba57161ed09aee31beac1e
        EAP-Message = [payload removed: 218 characters]
        Message-Authenticator = 0x4e99a74d77d87576c4c7fe527d93f38d
        Proxy-State = 0x0402a9fe01035ced6f644c91240b7b6a21a92568154c
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
  modcall[authorize]: module "preprocess" returns ok for request 1
  rlm_eap: EAP packet type response id 2 length 108
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
    rlm_realm: No '@' in User-Name = "aricent", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
    users: Matched entry aricent at line 117
  modcall[authorize]: module "files" returns ok for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
modcall: leaving group authorize (returns updated) for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group EAP for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/ttls
  rlm_eap: processing type ttls
  rlm_eap_ttls: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
    (other): before/accept initialization
    TLS_accept: before/accept initialization
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello
    TLS_accept: SSLv3 read client hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
    TLS_accept: SSLv3 write server hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 05d7], Certificate
    TLS_accept: SSLv3 write certificate A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
    TLS_accept: SSLv3 write server done A
    TLS_accept: SSLv3 flush data
    TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
  eaptls_process returned 13
  modcall[authenticate]: module "eap" returns handled for request 1
modcall: leaving group EAP (returns handled) for request 1
Sending Access-Challenge of id 30 to 192.168.0.1 port 49152
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = 0x5a30818b310b300906035504061302494e3116301406
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xd1350e459ec5897073bcc1e1dfd602e3
        Proxy-State = 0x0402a9fe01035ced6f644c91240b7b6a21a92568154c
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.1:49152, id=31, length=183
        NAS-IP-Address = 169.254.1.3
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        Framed-MTU = 1400
        User-Name = "aricent"
        Calling-Station-Id = "00-90-4B-0A-D5-EF"
        Called-Station-Id = "00-19-E1-F0-9B-CE"
        NAS-Identifier = "Enterprise Wireless AP"
        State = 0xd1350e459ec5897073bcc1e1dfd602e3
        EAP-Message = 0x020300061500
        Message-Authenticator = 0xd988df4a33e5308aa7e0e6a14115d3c9
        Proxy-State = 0x0402a9fe01032240374c4e0a6e1e3e4e1d3e770804e6
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
  modcall[authorize]: module "preprocess" returns ok for request 2
  rlm_eap: EAP packet type response id 3 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 2
    rlm_realm: No '@' in User-Name = "aricent", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 2
    users: Matched entry aricent at line 117
  modcall[authorize]: module "files" returns ok for request 2
  modcall[authorize]: module "mschap" returns noop for request 2
modcall: leaving group authorize (returns updated) for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group EAP for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/ttls
  rlm_eap: processing type ttls
  rlm_eap_ttls: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1
  eaptls_process returned 13
  modcall[authenticate]: module "eap" returns handled for request 2
modcall: leaving group EAP (returns handled) for request 2
Sending Access-Challenge of id 31 to 192.168.0.1 port 49152
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = 0x02b1a1670131aaf7f65160a2783bed9c9b3c960a500790317cd323f800c3eca7978df10551bf7d47353b62b61164a7909b977281415f88ea23bd2516030100040e000000
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xcc9cdb1c4d40f75283e7d31fe913b487
        Proxy-State = 0x0402a9fe01032240374c4e0a6e1e3e4e1d3e770804e6
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.1:49152, id=32, length=381
        NAS-IP-Address = 169.254.1.3
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 0
        Framed-MTU = 1400
        User-Name = "aricent"
        Calling-Station-Id = "00-90-4B-0A-D5-EF"
        Called-Station-Id = "00-19-E1-F0-9B-CE"
        NAS-Identifier = "Enterprise Wireless AP"
        State = 0xcc9cdb1c4d40f75283e7d31fe913b487
        EAP-Message = [payload removed: 410 characters]
        Message-Authenticator = 0xbe88eb6a57813dee97eaa1ad42d301df
        Proxy-State = 0x0402a9fe010325cd3c914f054a2b159044f72d7324a2
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
Invalid operator for item Suffix: reverting to '=='
  modcall[authorize]: module "preprocess" returns ok for request 3
  rlm_eap: EAP packet type response id 4 length 204
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 3
    rlm_realm: No '@' in User-Name = "aricent", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 3
    users: Matched entry aricent at line 117
  modcall[authorize]: module "files" returns ok for request 3
  modcall[authorize]: module "mschap" returns noop for request 3
modcall: leaving group authorize (returns updated) for request 3
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group EAP for request 3
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/ttls
  rlm_eap: processing type ttls
  rlm_eap_ttls: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
    TLS_accept: SSLv3 read client key exchange A
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
    TLS_accept: SSLv3 read finished A
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
    TLS_accept: SSLv3 write change cipher spec A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
    TLS_accept: SSLv3 write finished A
    TLS_accept: SSLv3 flush data
    (other): SSL negotiation finished successfully
SSL Connection Established
  eaptls_process returned 13
  modcall[authenticate]: module "eap" returns handled for request 3
modcall: leaving group EAP (returns handled) for request 3
Sending Access-Challenge of id 32 to 192.168.0.1 port 49152
        EAP-Message = 0x0105004515800000003b140301000101160301003075a2c51f196cd25cb1d7b38f1e1cc91e799da31987f5e7d5235b2796eee25f9687d9136d19f9e994abc42acf796e9d50
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xe2cf75fe7b371e389029b6e5c4b253db
        Proxy-State = 0x0402a9fe010325cd3c914f054a2b159044f72d7324a2
Finished request 3
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 29 with timestamp 47a17263
Cleaning up request 1 ID 30 with timestamp 47a17263
Cleaning up request 2 ID 31 with timestamp 47a17263
Cleaning up request 3 ID 32 with timestamp 47a17263
Nothing to do.  Sleeping until we see a request.
 
