rad_recv: Access-Request packet from host w.x.y.z:1046, id=0, length=177
        User-Name = "testuser"
        NAS-IP-Address = w.x.y.z
        Called-Station-Id = "001d7e5dc520"
        Calling-Station-Id = "0016cbb1f902"
        NAS-Identifier = "001d7e5dc520"
        NAS-Port = 10
        Framed-MTU = 1400
        State = 0xaafd92bfb16297927e5b53fde6e3b52d
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x0207002b190017030100205a2dd9f0761ff1874a7d6aa970845f772eec68d85a7124cc1b717f7930bc2c9a
        Message-Authenticator = 0x0b925b0d2d16bdabdfe321a2c7399d42
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
  modcall[authorize]: module "preprocess" returns ok for request 8
  modcall[authorize]: module "chap" returns noop for request 8
  modcall[authorize]: module "mschap" returns noop for request 8
    rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 8
  rlm_eap: EAP packet type response id 7 length 43
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 8
    users: Matched testuser at 93
  modcall[authorize]: module "files" returns ok for request 8
modcall: group authorize returns updated for request 8
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure, rejecting.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 8
modcall: group authenticate returns invalid for request 8
auth: Failed to validate the user.
Login incorrect: [testuser] (from client sth_wireless_test port 10 cli 0016cbb1f902)
Delaying request 8 for 1 seconds
Finished request 8
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to w.x.y.z:1046
        EAP-Message = 0x04070004
        Message-Authenticator = 0x00000000000000000000000000000000
Cleaning up request 8 ID 0 with timestamp 484d9af1
Nothing to do.  Sleeping until we see a request.