Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=90, length=182
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = 0x020300061900
	State = 0x49595b094b5a4202775fa048860f1f11
	Message-Authenticator = 0x536599f560d86a4c509be7a69f47084e
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 90 to 192.168.0.199 port 1376
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 412 characters]
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x49595b094a5d4202775fa048860f1f11
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=91, length=376
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = [payload removed: 402 characters]
	State = 0x49595b094a5d4202775fa048860f1f11
	Message-Authenticator = 0xde20d26aea8d5ecf5fe8fd8e38f5414d
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 200
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 190
[peap] Length Included
[peap] eaptls_verify returned 11 
[peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
[peap]     TLS_accept: SSLv3 read client key exchange A 
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
[peap] <<< TLS 1.0 Handshake [length 0010], Finished  
[peap]     TLS_accept: SSLv3 read finished A 
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
[peap]     TLS_accept: SSLv3 write change cipher spec A 
[peap] >>> TLS 1.0 Handshake [length 0010], Finished  
[peap]     TLS_accept: SSLv3 write finished A 
[peap]     TLS_accept: SSLv3 flush data 
[peap]     (other): SSL negotiation finished successfully 
SSL Connection Established 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 91 to 192.168.0.199 port 1376
	EAP-Message = 0x0105003919001403010001011603010028d11b1f9113307828ff1855a4d19be23a61a2747273fab76098dc4d83a3bd82500743194eb0dcb4b3
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x49595b094d5c4202775fa048860f1f11
Finished request 4.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=92, length=182
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = 0x020500061900
	State = 0x49595b094d5c4202775fa048860f1f11
	Message-Authenticator = 0xc765f4cb6011014227ede4176aa494ff
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3 
[peap] eaptls_process returned 3 
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 92 to 192.168.0.199 port 1376
	EAP-Message = 0x0106002b1900170301002051411f474ebeb73ac25eb6804f77f858c2162c497d0d44795af75750553d7cdb
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x49595b094c5f4202775fa048860f1f11
Finished request 5.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=93, length=248
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = 0x02060048190017030100189dce6ae4b0e7626a80e9fa6b2033ae5111ba27f667cae4191703010020e7e2a4d0e906f105352cfadf2cf40dad31102a956da8cf1a7238a0808d0695ed
	State = 0x49595b094c5f4202775fa048860f1f11
	Message-Authenticator = 0x38dc142142c303e80b7572794b3724d8
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 72
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7 
[peap] Done initial handshake
[peap] eaptls_process returned 7 
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Identity - client
[peap] Got tunnled request
	EAP-Message = 0x0206000b01636c69656e74
server (null) {
  PEAP: Got tunneled identity of client
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to client
Sending tunneled request
	EAP-Message = 0x0206000b01636c69656e74
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "client"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 6 length 11
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry client at line 89
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
	Reply-Message = "Hello, client"
	EAP-Message = 0x010700201a0107001b10f474f3b69580e17f3b0680c2d41d7317636c69656e74
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xc6718235c67698c446659fb782fc21ed
[peap] Got tunneled reply RADIUS code 11
	Reply-Message = "Hello, client"
	EAP-Message = 0x010700201a0107001b10f474f3b69580e17f3b0680c2d41d7317636c69656e74
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xc6718235c67698c446659fb782fc21ed
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 93 to 192.168.0.199 port 1376
	EAP-Message = 0x01070043190017030100386beaabe29f5cd53608a3709bff2704b45506358ecf996bc4a716ca71967d65619ed31409ce14c577ab3929b185eb24d47b047bd6e8a8d5bb
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x49595b094f5e4202775fa048860f1f11
Finished request 6.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=94, length=240
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = 0x02070040190017030100186e2edd18ceb5604a145d713f4597b44baece5f0f88e8e5ea17030100181ef6f25817bed8c00e1da6aa9838c59fcb9f174b6a388724
	State = 0x49595b094f5e4202775fa048860f1f11
	Message-Authenticator = 0x0e3ddbc203700437b5d6eee1cecd5912
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 64
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7 
[peap] Done initial handshake
[peap] eaptls_process returned 7 
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] EAP type nak
[peap] Got tunnled request
	EAP-Message = 0x020700060304
server (null) {
  PEAP: Setting User-Name to client
Sending tunneled request
	EAP-Message = 0x020700060304
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "client"
	State = 0xc6718235c67698c446659fb782fc21ed
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 7 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry client at line 89
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/md5
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
	Reply-Message = "Hello, client"
	EAP-Message = 0x010800160410d10c9d658f673584ebe48d9ee23dd292
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xc6718235c77986c446659fb782fc21ed
[peap] Got tunneled reply RADIUS code 11
	Reply-Message = "Hello, client"
	EAP-Message = 0x010800160410d10c9d658f673584ebe48d9ee23dd292
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xc6718235c77986c446659fb782fc21ed
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 94 to 192.168.0.199 port 1376
	EAP-Message = 0x0108003319001703010028d6840c48ca0c7872a1e0002880490cb55f3edcb169129e6bae0e834a36b04d8423df210db790d0ca
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x49595b094e514202775fa048860f1f11
Finished request 7.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=95, length=256
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = 0x02080050190017030100188fda9b5c9d547537d95d8b15b0bddf49979dca1a962227af170301002857d6298e0c53206e1445f8c5ec7cb11c63dc7d7e8a289dc5fe81a94fef7070a4213b0aace8e50a6c
	State = 0x49595b094e514202775fa048860f1f11
	Message-Authenticator = 0x39edb9c79e34ab3c3688719c8ca23a74
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 80
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7 
[peap] Done initial handshake
[peap] eaptls_process returned 7 
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] EAP type md5
[peap] Got tunnled request
	EAP-Message = 0x020800160410622705afb928b5c49b4b6deae44b4ea7
server (null) {
  PEAP: Setting User-Name to client
Sending tunneled request
	EAP-Message = 0x020800160410622705afb928b5c49b4b6deae44b4ea7
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "client"
	State = 0xc6718235c77986c446659fb782fc21ed
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 8 length 22
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry client at line 89
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/md5
[eap] processing type md5
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
} # server inner-tunnel
[peap] Got tunneled reply code 3
	Reply-Message = "Hello, client"
	EAP-Message = 0x04080004
	Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
	Reply-Message = "Hello, client"
	EAP-Message = 0x04080004
	Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 95 to 192.168.0.199 port 1376
	EAP-Message = 0x0109002b19001703010020cf1e805cee2c191d83f70d7012d0ea5cd7ae3e2f6cd9543e784fdfa2147b4557
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x49595b0941504202775fa048860f1f11
Finished request 8.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.0.199 port 1376, id=96, length=248
	User-Name = "client"
	NAS-IP-Address = 192.168.0.199
	NAS-Identifier = "test.5gwireless.com"
	NAS-Port = 0
	Called-Station-Id = "00-0B-6B-87-01-BD:test"
	Calling-Station-Id = "00-1C-F0-9B-64-E5"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 0Mbps 802.11"
	EAP-Message = 0x0209004819001703010018b13073e5eb51fae3821e121fdd6383c48cc6b5b190bb6788170301002083628dd64df93fffefdb38356d51e0b78093db0a5f5873dd888bff546386d219
	State = 0x49595b0941504202775fa048860f1f11
	Message-Authenticator = 0x1b52b20bc7954df7401c5c955e414687
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "client", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 72
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7 
[peap] Done initial handshake
[peap] eaptls_process returned 7 
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Received EAP-TLV response.
[peap]  Had sent TLV failure.  User was rejected earlier in this session.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] 	expand: %{User-Name} -> client
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 9 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 9
Sending Access-Reject of id 96 to 192.168.0.199 port 1376
	EAP-Message = 0x04090004
	Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.7 seconds.
Cleaning up request 0 ID 87 with timestamp +59
Cleaning up request 1 ID 88 with timestamp +59
Cleaning up request 2 ID 89 with timestamp +59
Cleaning up request 3 ID 90 with timestamp +59
Waking up in 0.1 seconds.
Cleaning up request 4 ID 91 with timestamp +59
Cleaning up request 5 ID 92 with timestamp +59
Cleaning up request 6 ID 93 with timestamp +59
Cleaning up request 7 ID 94 with timestamp +59
Cleaning up request 8 ID 95 with timestamp +59
Waking up in 1.0 seconds.
Cleaning up request 9 ID 96 with timestamp +59
Ready to process requests.
