<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
How can i configure these attributes? The only information i found
about WIMAX is that i have to<br>
type "wimax" at the post-auth section.<br>
<br>
<blockquote cite="mid:qNnMLKWr.1229948204.1039310.tnt@kalik.net"
type="cite">
<blockquote type="cite">
<pre wrap="">I downloaded the last stable version via "git".
I typed the command git clone
git://git.freeradius.org/freeradius-server.git radiusd. Is that correct?
Then i installed freeradius and run radiusd but the same log of radiusd
appeared. The log is at the attachment.
</pre>
</blockquote>
<pre wrap=""><!---->
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=2,
length=314
User-Name = <a class="moz-txt-link-rfc2396E" href="mailto:{am=1}anonymous@wintegra.com">"{am=1}anonymous@wintegra.com"</a>
EAP-Message =
0x0202007015800000006616030100610100005d030149502abe282b6324c07315e57a95bd7f42dd38d221a592206f35256651f0c31e00003600390038003500160013000a00330032002f0007006600050004006300620061001500120009006500640060001400110008000600030100
Message-Authenticator = 0xe0ef04d2f20e8b07aeec51fef34cb796
NAS-IP-Address = 192.168.10.3
NAS-Port-Type = 27
Calling-Station-Id = "\000!\000\r\302#"
Chargeable-User-Identity = ""
WiMAX-Release = "1.0"
WiMAX-Accounting-Capabilities = IP-Session-Based
WiMAX-Hotlining-Capabilities = Not-Supported
WiMAX-Idle-Mode-Notification-Cap = Supported
WiMAX-Available-In-Client = 3
WiMAX-Session-Termination-Capability = Dynamic-Authorization
WiMAX-GMT-Timezone-offset = 0
WiMAX-BS-Id = 0x0050c21174a4
Service-Type = Framed-User
Framed-MTU = 2000
State = 0xc8679e10c8658b965d7f92904f2ccae1
..
[wimax] WARNING: WiMAX-MN-NAI was not found in the request or in the
reply.
[wimax] WARNING: We cannot calculate MN-HA keys.
[wimax] WARNING: WiMAX-IP-Technology not found in reply.
[wimax] WARNING: Not calculating MN-HA keys
++[wimax] returns updated
Sending Access-Accept of id 7 to 192.168.10.3 port 1812
MS-MPPE-Recv-Key =
0x0b807e1db02ccb8eabde63e0d4f7558f80c50fc6c46bf30f0697a8169a279608
MS-MPPE-Send-Key =
0x52964f865d141e239c4ef6e8528c3b33c0b3db0c78c7eeee565c07563c161c21
EAP-Message = 0x03070004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = <a class="moz-txt-link-rfc2396E" href="mailto:{am=1}anonymous@wintegra.com">"{am=1}anonymous@wintegra.com"</a>
So the message is correct! You haven't configured these attributes as
per instructions in wimax module.
Ivan Kalik
Kalik Informatika ISP
-
List info/subscribe/unsubscribe? See <a class="moz-txt-link-freetext" href="http://www.freeradius.org/list/users.html">http://www.freeradius.org/list/users.html</a>
</pre>
</blockquote>
<br>
</body>
</html>