rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=2, length=314
        User-Name = "{am=1}anonymous@wintegra.com"
        EAP-Message = [payload removed: 226 characters]
        Message-Authenticator = 0xe0ef04d2f20e8b07aeec51fef34cb796
        NAS-IP-Address = 192.168.10.3
        NAS-Port-Type = 27
        Calling-Station-Id = "\000!\000\r\302#"
        Chargeable-User-Identity = ""
        WiMAX-Release = "1.0"
        WiMAX-Accounting-Capabilities = IP-Session-Based
        WiMAX-Hotlining-Capabilities = Not-Supported
        WiMAX-Idle-Mode-Notification-Cap = Supported
        WiMAX-Available-In-Client = 3
        WiMAX-Session-Termination-Capability = Dynamic-Authorization
        WiMAX-GMT-Timezone-offset = 0
        WiMAX-BS-Id = 0x0050c21174a4
        Service-Type = Framed-User
        Framed-MTU = 2000
        State = 0xc8679e10c8658b965d7f92904f2ccae1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}anonymous@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 112
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
  TLS Length 102
[ttls] Length Included
[ttls] eaptls_verify returned 11 
[ttls]     (other): before/accept initialization 
[ttls]     TLS_accept: before/accept initialization 
[ttls] <<< TLS 1.0 Handshake [length 0061], ClientHello  
[ttls]     TLS_accept: SSLv3 read client hello A 
[ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello  
[ttls]     TLS_accept: SSLv3 write server hello A 
[ttls] >>> TLS 1.0 Handshake [length 085e], Certificate  
[ttls]     TLS_accept: SSLv3 write certificate A 
[ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange  
[ttls]     TLS_accept: SSLv3 write key exchange A 
[ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
[ttls]     TLS_accept: SSLv3 write server done A 
[ttls]     TLS_accept: SSLv3 flush data 
[ttls]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase 
In SSL Accept mode  
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 2 to 192.168.10.3 port 1812
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = 0xa73082038fa0030201020209
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc8679e10c9648b965d7f92904f2ccae1
Finished request 1.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=3, length=208
        User-Name = "{am=1}anonymous@wintegra.com"
        EAP-Message = 0x020300061500
        Message-Authenticator = 0xb4eba39521cf804772bf900dc62abcd6
        NAS-IP-Address = 192.168.10.3
        NAS-Port-Type = 27
        Calling-Station-Id = "\000!\000\r\302#"
        Chargeable-User-Identity = ""
        WiMAX-Release = "1.0"
        WiMAX-Accounting-Capabilities = IP-Session-Based
        WiMAX-Hotlining-Capabilities = Not-Supported
        WiMAX-Idle-Mode-Notification-Cap = Supported
        WiMAX-Available-In-Client = 3
        WiMAX-Session-Termination-Capability = Dynamic-Authorization
        WiMAX-GMT-Timezone-offset = 0
        WiMAX-BS-Id = 0x0050c21174a4
        Service-Type = Framed-User
        Framed-MTU = 2000
        State = 0xc8679e10c9648b965d7f92904f2ccae1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}anonymous@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 3 to 192.168.10.3 port 1812
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = 0xa79eefed2545c5aeba5a4fb0
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc8679e10ca638b965d7f92904f2ccae1
Finished request 2.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=4, length=208
        User-Name = "{am=1}anonymous@wintegra.com"
        EAP-Message = 0x020400061500
        Message-Authenticator = 0x35e1fab7fa37d487be02c71a4a5b1d99
        NAS-IP-Address = 192.168.10.3
        NAS-Port-Type = 27
        Calling-Station-Id = "\000!\000\r\302#"
        Chargeable-User-Identity = ""
        WiMAX-Release = "1.0"
        WiMAX-Accounting-Capabilities = IP-Session-Based
        WiMAX-Hotlining-Capabilities = Not-Supported
        WiMAX-Idle-Mode-Notification-Cap = Supported
        WiMAX-Available-In-Client = 3
        WiMAX-Session-Termination-Capability = Dynamic-Authorization
        WiMAX-GMT-Timezone-offset = 0
        WiMAX-BS-Id = 0x0050c21174a4
        Service-Type = Framed-User
        Framed-MTU = 2000
        State = 0xc8679e10ca638b965d7f92904f2ccae1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}anonymous@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 4 to 192.168.10.3 port 1812
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 420 characters]
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc8679e10cb628b965d7f92904f2ccae1
Finished request 3.
Going to the next request
Waking up in 4.6 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=5, length=410
        User-Name = "{am=1}anonymous@wintegra.com"
        EAP-Message = [payload removed: 418 characters]
        Message-Authenticator = 0xf73a978415b5f379ce8dcf2c66c31eec
        NAS-IP-Address = 192.168.10.3
        NAS-Port-Type = 27
        Calling-Station-Id = "\000!\000\r\302#"
        Chargeable-User-Identity = ""
        WiMAX-Release = "1.0"
        WiMAX-Accounting-Capabilities = IP-Session-Based
        WiMAX-Hotlining-Capabilities = Not-Supported
        WiMAX-Idle-Mode-Notification-Cap = Supported
        WiMAX-Available-In-Client = 3
        WiMAX-Session-Termination-Capability = Dynamic-Authorization
        WiMAX-GMT-Timezone-offset = 0
        WiMAX-BS-Id = 0x0050c21174a4
        Service-Type = Framed-User
        Framed-MTU = 2000
        State = 0xc8679e10cb628b965d7f92904f2ccae1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}anonymous@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 208
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
  TLS Length 198
[ttls] Length Included
[ttls] eaptls_verify returned 11 
[ttls] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
[ttls]     TLS_accept: SSLv3 read client key exchange A 
[ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
[ttls] <<< TLS 1.0 Handshake [length 0010], Finished  
[ttls]     TLS_accept: SSLv3 read finished A 
[ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
[ttls]     TLS_accept: SSLv3 write change cipher spec A 
[ttls] >>> TLS 1.0 Handshake [length 0010], Finished  
[ttls]     TLS_accept: SSLv3 write finished A 
[ttls]     TLS_accept: SSLv3 flush data 
[ttls]     (other): SSL negotiation finished successfully 
SSL Connection Established 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 5 to 192.168.10.3 port 1812
        EAP-Message = 0x0106004515800000003b1403010001011603010030e114ae16ba3bd91b739be5cb91d9d13bcf346e27d38372c1ad349ae07937a9a25b4df255179929169b1c7cbe0088dbbd
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc8679e10cc618b965d7f92904f2ccae1
Finished request 4.
Going to the next request
Waking up in 2.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=6, length=410
        User-Name = "{am=1}anonymous@wintegra.com"
        EAP-Message = [payload removed: 418 characters]
        Message-Authenticator = 0x5a5a55ab33dfbf5a3e489e9f1740038b
        NAS-IP-Address = 192.168.10.3
        NAS-Port-Type = 27
        Calling-Station-Id = "\000!\000\r\302#"
        Chargeable-User-Identity = ""
        WiMAX-Release = "1.0"
        WiMAX-Accounting-Capabilities = IP-Session-Based
        WiMAX-Hotlining-Capabilities = Not-Supported
        WiMAX-Idle-Mode-Notification-Cap = Supported
        WiMAX-Available-In-Client = 3
        WiMAX-Session-Termination-Capability = Dynamic-Authorization
        WiMAX-GMT-Timezone-offset = 0
        WiMAX-BS-Id = 0x0050c21174a4
        Service-Type = Framed-User
        Framed-MTU = 2000
        State = 0xc8679e10cc618b965d7f92904f2ccae1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}anonymous@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 208
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7 
[ttls] Done initial handshake
[ttls] eaptls_process returned 7 
[ttls] Session established.  Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
        User-Name = "{am=1}wimax@wintegra.com"
        MS-CHAP-Challenge = 0x8bd7e3b7c587c1f714313949173e6c47
        MS-CHAP2-Response = 0x40008bd7e3b7c587c1f714313949173e6c470000000000000000d84b09990d4e575cdad3c65610ceb0ea4b0da2059165b89d
        FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Sending tunneled request
        User-Name = "{am=1}wimax@wintegra.com"
        MS-CHAP-Challenge = 0x8bd7e3b7c587c1f714313949173e6c47
        MS-CHAP2-Response = 0x40008bd7e3b7c587c1f714313949173e6c470000000000000000d84b09990d4e575cdad3c65610ceb0ea4b0da2059165b89d
        FreeRADIUS-Proxied-To = 127.0.0.1
server inner-tunnel {
+- entering group authorize {...}
[mschap] Found MS-CHAP attributes.  Setting 'Auth-Type  = mschap'
++[mschap] returns ok
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}wimax@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
++[control] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
[files] users: Matched entry {am=1}wimax@wintegra.com at line 98
[files]         expand: Hello, %{User-Name} -> Hello, {am=1}wimax@wintegra.com
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = MSCHAP
+- entering group MS-CHAP {...}
[mschap] Told to do MS-CHAPv2 for {am=1}wimax@wintegra.com with NT-Password
[mschap] adding MS-CHAPv2 MPPE keys
++[mschap] returns ok
} # server inner-tunnel
[ttls] Got tunneled reply code 2
        Reply-Message = "Hello, {am=1}wimax@wintegra.com"
        MS-CHAP2-Success = 0x40533d37323930314246313830413136443631363630363233413833333642443834314246384644343136
        MS-MPPE-Recv-Key = 0xcf1398cfe07b448e9fce8ec4019075b5
        MS-MPPE-Send-Key = 0x170b55cc84e9d1d69a7688f59c74ed62
        MS-MPPE-Encryption-Policy = 0x00000001
        MS-MPPE-Encryption-Types = 0x00000006
[ttls] Got tunneled Access-Accept
[ttls] Got MS-CHAP2-Success, tunneling it to the client in a challenge.
++[eap] returns handled
Sending Access-Challenge of id 6 to 192.168.10.3 port 1812
        EAP-Message = 0x0107005f1580000000551703010050842c9267d6817f7ff86823f8e86f72af8d8273a132f8df7644cb8ca02ffe635deece837b330d90c5d0535b7c6265350b80e2bc3dd714e26db815d20c59fafcc56c1f52a0b59b63b2255f55e9dccb750c
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc8679e10cd608b965d7f92904f2ccae1
Finished request 5.
Going to the next request
Waking up in 2.8 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=7, length=208
        User-Name = "{am=1}anonymous@wintegra.com"
        EAP-Message = 0x020700061500
        Message-Authenticator = 0x91722e2e82e9cd9ca7ae5594452c9413
        NAS-IP-Address = 192.168.10.3
        NAS-Port-Type = 27
        Calling-Station-Id = "\000!\000\r\302#"
        Chargeable-User-Identity = ""
        WiMAX-Release = "1.0"
        WiMAX-Accounting-Capabilities = IP-Session-Based
        WiMAX-Hotlining-Capabilities = Not-Supported
        WiMAX-Idle-Mode-Notification-Cap = Supported
        WiMAX-Available-In-Client = 3
        WiMAX-Session-Termination-Capability = Dynamic-Authorization
        WiMAX-GMT-Timezone-offset = 0
        WiMAX-BS-Id = 0x0050c21174a4
        Service-Type = Framed-User
        Framed-MTU = 2000
        State = 0xc8679e10cd608b965d7f92904f2ccae1
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] Looking up realm "wintegra.com" for User-Name = "{am=1}anonymous@wintegra.com"
[suffix] No such realm "wintegra.com"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake is finished
[ttls] eaptls_verify returned 3 
[ttls] eaptls_process returned 3 
[eap] Freeing handler
++[eap] returns ok
+- entering group post-auth {...}
++[exec] returns noop
[wimax] MIP-RK = 0x2670f915ed3a273f1c570b1957a9273d90b917ff1df50ddc8bbd3c52ef25d6be815eed97d18fe8b1441ee96e2fda610eb9a234425ced20c222f9e128d55218a8
[wimax] MIP-SPI = 62b39501
[wimax] WARNING: WiMAX-MN-NAI was not found in the request or in the reply.
[wimax] WARNING: We cannot calculate MN-HA keys.
[wimax] WARNING: WiMAX-IP-Technology not found in reply.
[wimax] WARNING: Not calculating MN-HA keys
++[wimax] returns updated
Sending Access-Accept of id 7 to 192.168.10.3 port 1812
        MS-MPPE-Recv-Key = 0x0b807e1db02ccb8eabde63e0d4f7558f80c50fc6c46bf30f0697a8169a279608
        MS-MPPE-Send-Key = 0x52964f865d141e239c4ef6e8528c3b33c0b3db0c78c7eeee565c07563c161c21
        EAP-Message = 0x03070004
        Message-Authenticator = 0x00000000000000000000000000000000
        User-Name = "{am=1}anonymous@wintegra.com"
Finished request 6.
Going to the next request
Waking up in 2.7 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=7, length=208
Sending duplicate reply to client wimaxbs port 1812 - ID: 7
Sending Access-Accept of id 7 to 192.168.10.3 port 1812
Waking up in 2.3 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=7, length=208
Sending duplicate reply to client wimaxbs port 1812 - ID: 7
Sending Access-Accept of id 7 to 192.168.10.3 port 1812
Waking up in 1.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.3 port 1812, id=7, length=208
Sending duplicate reply to client wimaxbs port 1812 - ID: 7
Sending Access-Accept of id 7 to 192.168.10.3 port 1812

