rad_recv: Access-Request packet from host 172.17.254.100 port 1645, id=9, length=157
        User-Name = "00a0080806bd"
        User-Password = "00a0080806bd"
        Service-Type = Call-Check
        Framed-MTU = 1500
        Called-Station-Id = "00-1D-E5-9C-29-04"
        Calling-Station-Id = "00-A0-08-08-06-BD"
        Message-Authenticator = 0xa3f41ca6cd54f096c389dbcbd9ba73ec
        NAS-Port-Type = Ethernet
        NAS-Port = 50102
        NAS-Port-Id = "FastEthernet1/0/2"
        NAS-IP-Address = 172.17.254.100
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "00a0080806bd", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns notfound
[files] users: Matched entry DEFAULT at line 38
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
++- entering policy rewrite_calling_station_id {...}
+++? if (request:Calling-Station-Id =~ /00-A0-08-([0-9A-F]{2})-([[0-9A-F]{2})-([[0-9A-F]{2})/i)
? Evaluating (request:Calling-Station-Id =~ /00-A0-08-([0-9A-F]{2})-([[0-9A-F]{2})-([[0-9A-F]{2})/i) -> TRUE
+++? if (request:Calling-Station-Id =~ /00-A0-08-([0-9A-F]{2})-([[0-9A-F]{2})-([[0-9A-F]{2})/i) -> TRUE
+++- entering if (request:Calling-Station-Id =~ /00-A0-08-([0-9A-F]{2})-([[0-9A-F]{2})-([[0-9A-F]{2})/i) {...}
        expand: 00a008%{1}%{2}%{3} -> 00a0080806BD
++++[request] returns noop
+++- if (request:Calling-Station-Id =~ /00-A0-08-([0-9A-F]{2})-([[0-9A-F]{2})-([[0-9A-F]{2})/i) returns noop
+++ ... skipping else for request 1: Preceding "if" was taken
++- policy rewrite_calling_station_id returns noop
++? if ((Service-Type == 'Call-Check') && (User-Name =~ /^%{Calling-Station-ID}$/i))
?? Evaluating (Service-Type == 'Call-Check') -> TRUE
        expand: ^%{Calling-Station-ID}$ -> ^00a0080806BD$
?? Evaluating (User-Name =~ /^%{Calling-Station-ID}$/i) -> TRUE
++? if ((Service-Type == 'Call-Check') && (User-Name =~ /^%{Calling-Station-ID}$/i)) -> TRUE
++- entering if ((Service-Type == 'Call-Check') && (User-Name =~ /^%{Calling-Station-ID}$/i)) {...}
+++[control] returns noop
++- if ((Service-Type == 'Call-Check') && (User-Name =~ /^%{Calling-Station-ID}$/i)) returns noop
Found Auth-Type = ntlm_auth
+- entering group authenticate {...}
[ntlm_auth]     expand: --username=%{mschap:User-Name} -> --username=00a0080806bd
[ntlm_auth]     expand: --password=%{User-Password} -> --password=00a0080806bd
Exec-Program output: NT_STATUS_NO_SUCH_USER: No such user (0xc0000064)
Exec-Program-Wait: plaintext: NT_STATUS_NO_SUCH_USER: No such user (0xc0000064)
Exec-Program: returned: 1
++[ntlm_auth] returns reject
Failed to authenticate the user.
Login incorrect: [00a0080806bd/00a0080806bd] (from client switches port 50102 cli 00a0080806BD)
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> 00a0080806bd
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.