
ad_recv: Access-Request packet from host xx.xx.xx.xx port 3072, id=57, length=185
        User-Name = "TEST\\test-1804"
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Port = 0
        Called-Station-Id = "001f1fd74ce9"
        Calling-Station-Id = "001a734337c9"
        NAS-Identifier = "Realtek Access Point. 8181"
        Framed-MTU = 1400
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x0200001301544553545c746573742d31383034
        Message-Authenticator = 0x8012a54d51c5aa3c6a6a96aa75aa18cd
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "TEST\test-1804", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 19
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 57 to xx.xx.xx.xx port 3072
        EAP-Message = 0x010100160410bcac0552383c8987ceeedb8259d7512e
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf1c30f25f1c20b7f17369eba55349056
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host xx.xx.xx.xx port 3072, id=58, length=184
        User-Name = "TEST\\test-1804"
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Port = 0
        Called-Station-Id = "001f1fd74ce9"
        Calling-Station-Id = "001a734337c9"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x020100060319
        State = 0xf1c30f25f1c20b7f17369eba55349056
        Message-Authenticator = 0x9a186d278c1f81fb746473363ed32079
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "TEST\test-1804", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 58 to xx.xx.xx.xx port 3072
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf1c30f25f0c1167f17369eba55349056
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host xx.xx.xx.xx port 3072, id=59, length=308
        User-Name = "TEST\\test-1804"
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Port = 0
        Called-Station-Id = "001f1fd74ce9"
        Calling-Station-Id = "001a734337c9"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = [payload removed: 262 characters]
        State = 0xf1c30f25f0c1167f17369eba55349056
        Message-Authenticator = 0xc79d3a7230dc27da64618790895b12f4
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "TEST\test-1804", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 130
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 120
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0073], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 59 to xx.xx.xx.xx port 3072
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = 0xf60004ab308204a73082038f
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf1c30f25f3c0167f17369eba55349056
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host xx.xx.xx.xx port 3072, id=60, length=184
        User-Name = "TEST\\test-1804"
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Port = 0
        Called-Station-Id = "001f1fd74ce9"
        Calling-Station-Id = "001a734337c9"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x020300061900
        State = 0xf1c30f25f3c0167f17369eba55349056
        Message-Authenticator = 0x261da0e043b9bfb64e89e09348b83a45
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "TEST\test-1804", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 60 to xx.xx.xx.xx port 3072
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = [payload removed: 508 characters]
        EAP-Message = 0x93a5a16694df2a56
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf1c30f25f2c7167f17369eba55349056
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host xx.xx.xx.xx port 3072, id=61, length=184
        User-Name = "TEST\\test-1804"
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Port = 0
        Called-Station-Id = "001f1fd74ce9"
        Calling-Station-Id = "001a734337c9"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x020400061900
        State = 0xf1c30f25f2c7167f17369eba55349056
        Message-Authenticator = 0x47f450d8911252a7359fb4aca48d6de0
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "TEST\test-1804", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 61 to xx.xx.xx.xx port 3072
        EAP-Message = [payload removed: 378 characters]
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf1c30f25f5c6167f17369eba55349056
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host xx.xx.xx.xx port 3072, id=62, length=184
        User-Name = "TEST\\test-1804"
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Port = 0
        Called-Station-Id = "001f1fd74ce9"
        Calling-Station-Id = "001a734337c9"
        NAS-Identifier = "Realtek Access Point. 8181"
        NAS-Port-Type = Wireless-802.11
        Service-Type = Framed-User
        Connect-Info = "CONNECT 11Mbps 802.11b"
        EAP-Message = 0x020500061900
        State = 0xf1c30f25f5c6167f17369eba55349056
        Message-Authenticator = 0xd8967a29a74719843bd5e7b6a8640645
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "TEST\test-1804", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 62 to xx.xx.xx.xx port 3072
        EAP-Message = 0x010600061900
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf1c30f25f4c5167f17369eba55349056
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 0 ID 57 with timestamp +39
Cleaning up request 1 ID 58 with timestamp +39
Cleaning up request 2 ID 59 with timestamp +39
Cleaning up request 3 ID 60 with timestamp +39
Cleaning up request 4 ID 61 with timestamp +39
Cleaning up request 5 ID 62 with timestamp +39
Ready to process requests.
                                              
