FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Jun  1 2011 at 14:11:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2. 
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/control-socket
main {
	allow_core_dumps = yes
}
Core dumps are enabled.
including dictionary file /usr/local/etc/raddb/dictionary
main {
	prefix = "/usr/local"
	localstatedir = "/usr/local/var"
	logdir = "/usr/local/var/log/radius"
	libdir = "/usr/local/lib"
	radacctdir = "/usr/local/var/log/radius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
	checkrad = "/usr/local/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
	stripped_names = no
	auth = no
	auth_badpass = no
	auth_goodpass = no
 }
 security {
	max_attributes = 200
	reject_delay = 1
	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
	retry_delay = 5
	retry_count = 3
	default_fallback = no
	dead_time = 120
	wake_all_if_all_dead = no
 }
 home_server localhost {
	ipaddr = 127.0.0.1
	port = 1812
	type = "auth"
	secret = "testing123"
	response_window = 20
	max_outstanding = 65536
	require_message_authenticator = yes
	zombie_period = 40
	status_check = "status-server"
	ping_interval = 30
	check_interval = 30
	num_answers_to_alive = 3
	num_pings_to_alive = 3
	revive_interval = 120
	status_check_timeout = 4
	irt = 2
	mrt = 16
	mrc = 5
	mrd = 30
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
 realm spot {
	nostrip
	authhost = radius.blabla
	accthost = radius2.blabla
	secret = testing123
 }
radiusd: #### Loading Clients ####
 client localhost {
	ipaddr = 127.0.0.1
	require_message_authenticator = no
	secret = "testing123"
	nastype = "other"
 }
 client 10.73.108.0/24 {
	require_message_authenticator = no
	secret = "testing123-3"
	shortname = "Spot"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec
  exec {
	wait = no
	input_pairs = "request"
	shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration
  expiration {
	reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime
  logintime {
	reply-message = "You are calling outside your allowed timespan  "
	minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server proxy-inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_eap
 Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
  eap {
	default_eap_type = "peap"
	timer_expire = 60
	ignore_unknown_eap_types = no
	cisco_accounting_username_bug = no
	max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
	challenge = "Password: "
	auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
	rsa_key_exchange = no
	dh_key_exchange = yes
	rsa_key_length = 512
	dh_key_length = 512
	verify_depth = 0
	CA_path = "/usr/local/etc/raddb/certs"
	pem_file_type = yes
	private_key_file = "/usr/local/etc/raddb/certs/server.pem"
	certificate_file = "/usr/local/etc/raddb/certs/server.pem"
	CA_file = "/usr/local/etc/raddb/certs/ca.pem"
	private_key_password = "secret"
	dh_file = "/usr/local/etc/raddb/certs/dh"
	random_file = "/usr/local/etc/raddb/certs/random"
	fragment_size = 1024
	include_length = yes
	check_crl = no
	cipher_list = "DEFAULT"
	make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
    cache {
	enable = no
	lifetime = 24
	max_entries = 255
    }
    verify {
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
	default_eap_type = "md5"
	copy_request_to_tunnel = no
	use_tunneled_reply = no
	virtual_server = "inner-tunnel"
	include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
	default_eap_type = "mschapv2"
	copy_request_to_tunnel = yes
	use_tunneled_reply = no
	proxy_tunneled_request_as_eap = no
	virtual_server = "proxy-inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
	with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 } # modules
} # server
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap
  pap {
	encryption_scheme = "auto"
	auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap
  mschap {
	use_mppe = yes
	require_encryption = no
	require_strong = no
	with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix
  unix {
	radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm
  realm suffix {
	format = "suffix"
	delimiter = "@"
	ignore_default = no
	ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files
  files {
	usersfile = "/usr/local/etc/raddb/users"
	acctusersfile = "/usr/local/etc/raddb/acct_users"
	preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
	compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp
  radutmp {
	filename = "/usr/local/var/log/radius/radutmp"
	username = "%{User-Name}"
	case_sensitive = yes
	check_with_nas = yes
	perm = 384
	callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter
  attr_filter attr_filter.access_reject {
	attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
	key = "%{User-Name}"
  }
 } # modules
} # server
server { # from file /usr/local/etc/raddb/radiusd.conf
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_digest
 Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess
  preprocess {
	huntgroups = "/usr/local/etc/raddb/huntgroups"
	hints = "/usr/local/etc/raddb/hints"
	with_ascend_hack = no
	ascend_channels_per_line = 23
	with_ntdomain_hack = no
	with_specialix_jetstream_hack = no
	with_cisco_vsa_hack = no
	with_alvarion_vsa_hack = no
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique
  acct_unique {
	key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail
  detail {
	detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
	header = "%t"
	detailperm = 384
	dirperm = 493
	locking = no
	log_packet_header = no
  }
 Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter
  attr_filter attr_filter.accounting_response {
	attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
	key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
	type = "auth"
	ipaddr = *
	port = 0
}
listen {
	type = "acct"
	ipaddr = *
	port = 0
}
listen {
	type = "control"
 listen {
	socket = "/usr/local/var/run/radiusd/radiusd.sock"
 }
}
listen {
	type = "auth"
	ipaddr = 127.0.0.1
	port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=127
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0201000c0174657374696164
	Message-Authenticator = 0xa6136247aef9dc5a3dfc1e2cb7997c10
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 12
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = 0x010200061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda5872ef416fcce132a807fa59a
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=254
Cleaning up request 0 ID 0 with timestamp +6
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda5872ef416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda5872ef416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 244 characters]
	Message-Authenticator = 0x09d281d00ac9508e0108822c7fb30caa
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 121
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 111
[peap] Length Included
[peap] eaptls_verify returned 11 
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 006a], ClientHello  
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello  
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 0804], Certificate  
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase 
In SSL Accept mode  
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = 0x864886f70d01010505003081
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda5862ff416fcce132a807fa59a
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139
Cleaning up request 1 ID 0 with timestamp +6
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda5862ff416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda5862ff416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020300061900
	Message-Authenticator = 0xda0bec72f89b8686c85db15af2b44f76
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = 0xd3f95b56a50d5669
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda58528f416fcce132a807fa59a
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139
Cleaning up request 2 ID 0 with timestamp +7
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda58528f416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda58528f416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020400061900
	Message-Authenticator = 0x68f1caeac9dbb34e879ae67676ca8c97
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = 0x010500621900c1968a67eebfcdeec55b0476cd4c38736f08703b40119f8279fc6e5109780f013bbcf61c0a3499974e1f2b2b197f92b14b348919d48a976735aae2239b3420f3e1c220f1392aed5584a7016fbce4e11663f3f016030100040e000000
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda58429f416fcce132a807fa59a
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=471
Cleaning up request 3 ID 0 with timestamp +7
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda58429f416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda58429f416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 508 characters]
	EAP-Message = 0xbf638cf703605cb1f429cc16e4875a43eb7e402dbfc49c2614030100010116030100303dd7dd3b91da8e4a363a82f6debaae5f6705b526009a10487d46babb912ea45fd762cc20b5726d71ad9d327034712200
	Message-Authenticator = 0x53c13b1af6b0f2dcb5a2e53bcaceefc9
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 326
[peap] Length Included
[peap] eaptls_verify returned 11 
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange  
[peap]     TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
[peap] <<< TLS 1.0 Handshake [length 0010], Finished  
[peap]     TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
[peap]     TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished  
[peap]     TLS_accept: SSLv3 write finished A
[peap]     TLS_accept: SSLv3 flush data
[peap]     (other): SSL negotiation finished successfully
SSL Connection Established 
[peap] eaptls_process returned 13 
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = 0x01060041190014030100010116030100309b393ca57780b79eb43b91305a280b65cd4ba48457e45e2b34e56ca754d6cfb214e09ca153dd0592850bb04e1b108ced
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda5832af416fcce132a807fa59a
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=139
Cleaning up request 4 ID 0 with timestamp +7
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda5832af416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda5832af416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x020600061900
	Message-Authenticator = 0x077dbc205e7bcfc6ce2b51f5c0bd33b6
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3 
[peap] eaptls_process returned 3 
[peap] EAPTLS_SUCCESS
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state TUNNEL ESTABLISHED
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = 0x0107002b190017030100204e0a45adfc896d12ef52ee91ae7e917c4d5a0843b9daf0082763105b76ab1736
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda5822bf416fcce132a807fa59a
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=176
Cleaning up request 5 ID 0 with timestamp +7
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda5822bf416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda5822bf416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = 0x0207002b1900170301002002411188b62f7f0f621000198a3a5e51af322312f34dea684f00556e91d5320e
	Message-Authenticator = 0xaaafa27b546fd600c990d7004e13daf1
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7 
[peap] Done initial handshake
[peap] eaptls_process returned 7 
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state WAITING FOR INNER IDENTITY
[peap] Identity - test
[peap] Got inner identity 'test'
[peap] Setting default EAP type for tunneled EAP session.
[peap] Got tunneled request
	EAP-Message = 0x0207000c0174657374696164
server  {
  PEAP: Setting User-Name to test
Sending tunneled request
	EAP-Message = 0x0207000c0174657374696164
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
server proxy-inner-tunnel {
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
+- entering group authorize {...}
++[control] returns notfound
} # server proxy-inner-tunnel
[peap] Got tunneled reply code 0
  PEAP: Calling authenticate in order to initiate tunneled EAP session.
# Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
    PEAP: Cancelling proxy to realm spot until the tunneled EAP session has been established
[peap] Got tunneled reply RADIUS code 11
	EAP-Message = 0x010800211a0108001c10afd44c27c37b79af35d30add84bfef9874657374696164
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x387020c438783a8a5d7d9ae55d393176
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 0 to 10.73.108.250 port 2048
	EAP-Message = 0x0108004b1900170301004037cceb9590851e01d3aa19f1c45feba5cfa13fb066dd3f58cc0f9d187f5b7e19da62d37bbc2fad7332dba399a98d25c3133ca262b780365bf5ac93687420ef18
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x872ceda58124f416fcce132a807fa59a
Finished request 6.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.73.108.250 port 2048, id=0, length=240
Cleaning up request 6 ID 0 with timestamp +7
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x872ceda58124f416 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	State = 0x872ceda58124f416fcce132a807fa59a
	NAS-Port-Type = Wireless-802.11
	EAP-Message = [payload removed: 216 characters]
	Message-Authenticator = 0xe4230d4626e2d4b863a9c04b1303eb07
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "test", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 107
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7 
[peap] Done initial handshake
[peap] eaptls_process returned 7 
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Peap state phase2
[peap] EAP type mschapv2
[peap] Got tunneled request
	EAP-Message = 0x020800421a0208003d312d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c0074657374696164
server  {
  PEAP: Setting User-Name to test
Sending tunneled request
	EAP-Message = 0x020800421a0208003d312d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c0074657374696164
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "test"
	State = 0x387020c438783a8a5d7d9ae55d393176
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
server proxy-inner-tunnel {
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
+- entering group authorize {...}
++[control] returns notfound
} # server proxy-inner-tunnel
[peap] Got tunneled reply code 0
  PEAP: Calling authenticate in order to initiate tunneled EAP session.
# Executing group from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[eap]   Not-EAP proxy set.  Not composing EAP
++[eap] returns handled
  PEAP: Tunneled authentication will be proxied to spot
  PEAP: Remembering to do EAP-MS-CHAP-V2 post-proxy.
[eap]   Tunneled session will be proxied.  Not doing EAP.
++[eap] returns handled
  WARNING: Empty pre-proxy section.  Using default return values.
Sending Access-Request of id 142 to 111.111.111.111 port 1812
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	MS-CHAP-Challenge = 0xafd44c27c37b79af35d30add84bfef98
	MS-CHAP2-Response = 0x08652d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c
	Proxy-State = 0x30
Proxying request 7 to home server 111.111.111.111 port 1812
Sending Access-Request of id 142 to 111.111.111.111 port 1812
	User-Name = "test"
	NAS-IP-Address = 10.73.108.250
	Called-Station-Id = "022369f4829a"
	Calling-Station-Id = "001e654bde20"
	NAS-Identifier = "022369f4829a"
	NAS-Port = 53
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	MS-CHAP-Challenge = 0xafd44c27c37b79af35d30add84bfef98
	MS-CHAP2-Response = 0x08652d2fa39213a4c0a56b970e13741f723500000000000000000e32e5c11d31a3f2315821c2cdfc09c9c5b5833f59459d6c
	Proxy-State = 0x30
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Accept packet from host 111.111.111.111 port 1812, id=142, length=182
	MS-CHAP2-Success = 0x08533d36303641433945394338314132343242413137463035344338314632353339364339423531354642
	MS-MPPE-Recv-Key = 0x6402c90b25701f12a1f003586fa0067e
	MS-MPPE-Send-Key = 0x26ceb550531337a9bba59aa8ad27a46d
	MS-MPPE-Encryption-Policy = 0x00000001
	MS-MPPE-Encryption-Types = 0x00000006
	Proxy-State = 0x30
# Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/default
+- entering group post-proxy {...}
[eap] Doing post-proxy callback
[eap] Passing reply from proxy back into the tunnel.
server proxy-inner-tunnel {
[eap] Passing reply back for EAP-MS-CHAP-V2
# Executing section post-proxy from file /usr/local/etc/raddb/sites-enabled/proxy-inner-tunnel
+- entering group post-proxy {...}
++[eap] returns noop
  WARNING: Empty post-auth section.  Using default return values.
} # server proxy-inner-tunnel
[eap] Final reply from tunneled session code 2
	MS-CHAP2-Success = 0x08533d36303641433945394338314132343242413137463035344338314632353339364339423531354642
	MS-MPPE-Recv-Key = 0x6402c90b25701f12a1f003586fa0067e
	MS-MPPE-Send-Key = 0x26ceb550531337a9bba59aa8ad27a46d
	MS-MPPE-Encryption-Policy = 0x00000001
	MS-MPPE-Encryption-Types = 0x00000006
	Proxy-State = 0x30
[eap] Got reply 2