Hi, All,

When Using a Server by Radius Authtication, always failed, check in Radius Server by Radius -A -X , see below.

rad_recv: Access-Request packet from host 10.10.7.190:5672, id=0, length=87
        User-Name = "tester"
        User-Password = "\010\n\rINCORRECT"
        NAS-IP-Address = 10.10.7.190
        NAS-Identifier = "sshd"
        NAS-Port = 4647
        NAS-Port-Type = Virtual
        Service-Type = Authenticate-Only
        Calling-Station-Id = "10.10.7.5"

But if other client using same radius server authticate with same username and pasword, the "User-Password" field is in clear text and all works.

Could some one look this for me, many thanks.

Ryan.

使用下一代的 MSN Messenger。立即尝试！