Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 172.20.161.138:1812, id=1, length=135 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x0201000b0163666c696e74 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xb04ea21e812245c3b3e98d98bed9050d Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 modcall[authorize]: module "files" returns notfound for request 0 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 1 to 172.20.161.138:1812 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x97fa1026ce8cf220c1b4e057b4610771 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=2, length=248 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x0202006a198000000060160301005b01000057030143500208ccc88d1588f5f5413e3a0d964003a5adb811b6a3da34e2c21085380800003000390038003500160013000a00330032002f0066000500040065006400630062006000150012000900140011000800030100 State = 0x97fa1026ce8cf220c1b4e057b4610771 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x473c85de95fb6fedea6e50a05fdbf45a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_eap: EAP packet type response id 2 length 106 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 modcall[authorize]: module "files" returns notfound for request 1 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 005b], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0305], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 2 to 172.20.161.138:1812 EAP-Message = 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 EAP-Message = 0x7572616e63653110300e06035504031307555352383230303123302106092a864886f70d0109011614626574612d75737238323030407573722e636f6d301e170d3035313030343230303333305a170d3036313030343230303333305a3081b4310b30090603550406130255533111300f06035504081308496c6c696e696f73311330110603550407130a53636861756d6275726731223020060355040a1319552e532e20526f626f7469637320436f72706f726174696f6e31223020060355040b131950726f64756374205175616c697479204173737572616e63653110300e06035504031307555352383230303123302106092a864886f70d0109 EAP-Message = 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 EAP-Message = 0x5fed1e9942f5747243e6275f63903afeb5ae92fed67d6a923f7a6581271fb1debb974f4ec4eb914f9f783596eaa722f5c798ecc94b5e8bd491a118bc9466603dc17ca14d437a9dc04b5ea81426938edd40b333dec3af05ad298693018d98854fefd547f7041b1bf016030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba8622585d23b61cbbb69a55ed76f31d Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=3, length=350 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x020300d01980000000c61603010086100000820080568b7ebc1a7bc03e648c4aa9563a6f5bee852a91d28740ebcfe08c03a3f386c3fb042a15cfb6921505136d2b2be2ede400281d41669cbd4356a4df73e988fe28d59cbde3da49205f6a2390eea2ae37fc98ffc9cb717c17fcc17e24978d883ca2004c1fd946e73547b1350c61ad120aae595cc1b9babf82a36beda8818cdd005414030100010116030100301dbde020bd69ab74452e63841fa32145cb334ec2b0cf63f1b44e217ed944e6adcbcd17b6c65ded6a96b34a76fa62a367 State = 0xba8622585d23b61cbbb69a55ed76f31d NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xa0311879d93249227ae16cfbd7bfabd8 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_eap: EAP packet type response id 3 length 208 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 modcall[authorize]: module "files" returns notfound for request 2 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 3 to 172.20.161.138:1812 EAP-Message = 0x0104004119001403010001011603010030613735e89023596b2c9b5fdfd00069c6d6044b4872247426010883468ac355666f33cb35ff6bf4a10e31d0ff13c26110 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb18a2426a58d3727536694fecdbaf633 Finished request 2 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=4, length=148 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x020400061900 State = 0xb18a2426a58d3727536694fecdbaf633 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x3da47dc9ef22ff9ec1187c0fc7916c9c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 modcall[authorize]: module "files" returns notfound for request 3 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 4 to 172.20.161.138:1812 EAP-Message = 0x010500501900170301002065952b373fd1ec0f5da91dbe1aadb956fa7b21ca9379edc0e26b55d36f4b8020170301002067445a832cd70c5765093d306b37ef72a17326973762558323a39d94dc8960b8 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c9d0fae0ec359629a1d3e592556269f Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 4 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=5, length=222 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x020500501900170301002018578f23231a70a4ed05783c73d3bf2f88b9900063b731b5f5dbaa3e5465cf49170301002089e71fa21c37b6eb93cbe5dc6d7e0e6da9a9fbbb52b4a25fd492a2b83845c49c State = 0x4c9d0fae0ec359629a1d3e592556269f NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xe06f64972c4e1d286b1943469610462d Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_eap: EAP packet type response id 5 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 modcall[authorize]: module "files" returns notfound for request 4 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - cflint rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of cflint PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to cflint Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_eap: EAP packet type response id 5 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 modcall[authorize]: module "files" returns notfound for request 4 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 Sending Access-Challenge of id 5 to 172.20.161.138:1812 EAP-Message = 0x0106007019001703010020a5f08d463a4e5c6e290016cfda21ab83b3fe465c43af349f437fb4ba107f71bc1703010040121d80819613523c3c3bfc04cb088cb785a08e4803ab360618a072618207a0312470d477c5e6d34af7399dbb800302f98698d6b6df2eeb821769e9165be2dac4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x99b9781be6f89fae433025d2e6e067d1 Finished request 4 Going to the next request --- Walking the entire request list --- Waking up in 3 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=6, length=286 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x020600901900170301002022ddb25432cfa07baf8d23c78301d3db3e312d5a2aa562d4e9d614200d8446a417030100606232f9dff2accbda82c5635f936dd92c4301932b4e977a91223459f5237fa03cc5456b7eb5e36941345d37b9d103b87222477572b0689fc7bf275e0f6d36c4b825ba0d0eaf016ea4a8e32a66c91775885a51f899a800cb141579442fb7b40113 State = 0x99b9781be6f89fae433025d2e6e067d1 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xe4f5ea0f4947ed66bf08d4c9701982bd Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_eap: EAP packet type response id 6 length 144 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall[authorize]: module "files" returns notfound for request 5 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to cflint PEAP: Adding old state with 81 df Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_eap: EAP packet type response id 6 length 65 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall[authorize]: module "files" returns notfound for request 5 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 5 rlm_mschap: Found LM-Password rlm_mschap: Found NT-Password rlm_mschap: Told to do MS-CHAPv2 for cflint with NT-Password rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 5 modcall: group Auth-Type returns ok for request 5 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 Sending Access-Challenge of id 6 to 172.20.161.138:1812 EAP-Message = 0x010700801900170301002053a9aa60d9eafdf83f9f9f5489d3547522f6922fe52749acedb7afc064d3010e1703010050d56f42aacf881aa1c43eea449b9d17345b33f64189673356d40c9c7ca9f8944bc35650d95dffa63f160c95e9cca7701ed3fb9cd399990c6643381d00736912089bc065083e6f55c65d4c95f58c63a66b Message-Authenticator = 0x00000000000000000000000000000000 State = 0x710a80c49a51690d9667f4a630de00ec Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 2 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=7, length=222 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x02070050190017030100202bea8ad892dbcc055ea04e951db78d2c35286770ffc4af53081b9ea95e53c6ae1703010020eaca5677bc7c464220e4af5527f8f1f4d0af74bd17da8cef5c80879eb42e531d State = 0x710a80c49a51690d9667f4a630de00ec NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x9fa0991da4e82b40bc1ead38f576861c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_eap: EAP packet type response id 7 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall[authorize]: module "files" returns notfound for request 6 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 6 modcall: group authorize returns updated for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to cflint PEAP: Adding old state with 5f 77 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_eap: EAP packet type response id 7 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall[authorize]: module "files" returns notfound for request 6 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 6 modcall: group authorize returns updated for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 6 modcall: group authenticate returns ok for request 6 Login OK: [cflint/] (from client localhost port 0) PEAP: Tunneled authentication was successful. rlm_eap_peap: SUCCESS modcall[authenticate]: module "eap" returns handled for request 6 modcall: group authenticate returns handled for request 6 Sending Access-Challenge of id 7 to 172.20.161.138:1812 EAP-Message = 0x01080050190017030100205b052c90899d09d8ce0ede26d6bfd8d22072c6cb4d75c15232d62dc45e71dfef170301002090bab6b310fbe35503f035e51dbfa37dab258ebc96be0cef6fd6d4d6bdc4deb3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf8ac58bba892fdca4d3ae799ba145e0 Finished request 6 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 172.20.161.138:1812, id=8, length=222 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x02080050190017030100205c5826b9e9fc3087dc11ae23396910b5a4f08ed2845cea8ba4b07293e4901b151703010020b880ab68fa71541dda81c3187864f892a011e379fdd4b699ab477239b6b05f92 State = 0xaf8ac58bba892fdca4d3ae799ba145e0 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x3b50990d288f958f825e216773838d78 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_eap: EAP packet type response id 8 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 modcall[authorize]: module "files" returns notfound for request 7 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 7 modcall: group authorize returns updated for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Success rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 7 modcall: group authenticate returns ok for request 7 Login OK: [cflint/] (from client cisco port 0 cli 00-c0-49-f7-02-3c) Sending Access-Accept of id 8 to 172.20.161.138:1812 MS-MPPE-Recv-Key = 0x7ec051a1fda18b2c290025f314b323a2903ace0523a5f355736e37a025cb545a MS-MPPE-Send-Key = 0x9f4846668a198bf86234b1f7f1e8cafc147ea512ff644fb377253f1099636474 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "cflint" Finished request 7 Going to the next request --- Walking the entire request list --- Cleaning up request 0 ID 1 with timestamp 434ff363 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 2 with timestamp 434ff364 Cleaning up request 2 ID 3 with timestamp 434ff364 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 4 with timestamp 434ff365 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 4 ID 5 with timestamp 434ff366 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 5 ID 6 with timestamp 434ff367 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 6 ID 7 with timestamp 434ff368 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 7 ID 8 with timestamp 434ff369 Nothing to do. Sleeping until we see a request.