Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.5:1812, id=57, length=135 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x0201000b0163666c696e74 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x720ada46bfd87cfb9822dc268428217b Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 modcall[authorize]: module "files" returns notfound for request 0 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 57 to 192.168.1.5:1812 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8f8ea96c9a5552d18a03007a0e510de2 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.1.5:1812, id=58, length=248 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x0202006a198000000060160301005b010000570301434ffed48fc6c3b34d12a0dcdaa0f862940de93c52f80360e8ca9a4bb929ab5900003000390038003500160013000a00330032002f0066000500040065006400630062006000150012000900140011000800030100 State = 0x8f8ea96c9a5552d18a03007a0e510de2 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x16d05a4838cde5711179d9c902077b59 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_eap: EAP packet type response id 2 length 106 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 modcall[authorize]: module "files" returns notfound for request 1 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 005b], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0305], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 58 to 192.168.1.5:1812 EAP-Message = 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 EAP-Message = 0x7572616e63653110300e06035504031307555352383230303123302106092a864886f70d0109011614626574612d75737238323030407573722e636f6d301e170d3035313030343230303333305a170d3036313030343230303333305a3081b4310b30090603550406130255533111300f06035504081308496c6c696e696f73311330110603550407130a53636861756d6275726731223020060355040a1319552e532e20526f626f7469637320436f72706f726174696f6e31223020060355040b131950726f64756374205175616c697479204173737572616e63653110300e06035504031307555352383230303123302106092a864886f70d0109 EAP-Message = 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 EAP-Message = 0x5fed1e9942f5747243e6275f63903afeb5ae92fed67d6a923f7a6581271fb1debb974f4ec4eb914f9f783596eaa722f5c798ecc94b5e8bd491a118bc9466603dc17ca14d437a9dc04b5ea81426938edd40b333dec3af05ad298693018d98854fefd547f7041b1bf016030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x104dadab049829eaaed79b28479f736b Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.1.5:1812, id=59, length=350 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x020300d01980000000c616030100861000008200803914ba7a9427bc3ce19d8f1eea44351470005fc8b15f4354f00b1dc2d7594d80959e3fd6b51eaa96f63d824e379b06ec28fd7a4843dcfe6d24f8bf41a60ab7743568ed20441b1b77453391630d040badca5239d1dbf2b7827724f0a6839996dc2b39d85ae6df84e73dacd0adfa5e3747994ae540b9eb5300c1e7683bca6674f514030100010116030100303e49fe2d94e86031a9c879fd07147730639af30d1913dcd5bdcaf01f076b92c44f16332ecc94a02f3bfadc5f87f5c01a State = 0x104dadab049829eaaed79b28479f736b NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xfb962a65930c15204b2b3ae28ecfb576 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_eap: EAP packet type response id 3 length 208 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 modcall[authorize]: module "files" returns notfound for request 2 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 59 to 192.168.1.5:1812 EAP-Message = 0x0104004119001403010001011603010030c1a1a6f8fc0a58296270ae57e73c7f92705f2dfa7a9307d186bfdcad827063cba58c43757bb5369d6e432301eab8f922 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaa1d1f65c45d0f61b99ce50f23683db9 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... rad_recv: Access-Request packet from host 192.168.1.5:1812, id=60, length=148 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x020400061900 State = 0xaa1d1f65c45d0f61b99ce50f23683db9 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xa99bfbc996f512f7279be7f5118b98fd Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 modcall[authorize]: module "files" returns notfound for request 3 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 60 to 192.168.1.5:1812 EAP-Message = 0x0105005019001703010020cc3b706b0d40f73b348a6a55f529fab9550506b20e895d6c8789a444c5c7c7281703010020535acd080eb9f051d222c0a616f89df073d2edd5b320df16b15dc1ec01223dbb Message-Authenticator = 0x00000000000000000000000000000000 State = 0x165babb88fd7d0049752c888aac03405 Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 4 seconds... rad_recv: Access-Request packet from host 192.168.1.5:1812, id=61, length=222 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x0205005019001703010020b8f48d91ad31e28e107ec0455f8b5634e3c87f9ebcd36fb9df387d2d4a9420911703010020b6dbf48b1f13d9a568b2d88368008af6c5263e36b88fce4f9508af1a843be3d9 State = 0x165babb88fd7d0049752c888aac03405 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0x985f0e6c9c546e2ad91c21f874f97900 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_eap: EAP packet type response id 5 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 modcall[authorize]: module "files" returns notfound for request 4 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - cflint rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x0205000b0163666c696e74 PEAP: Got tunneled identity of cflint PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to cflint PEAP: Sending tunneled request EAP-Message = 0x0205000b0163666c696e74 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "cflint" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_eap: EAP packet type response id 5 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 modcall[authorize]: module "files" returns notfound for request 4 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 PEAP: Got tunneled reply RADIUS code 11 EAP-Message = 0x010600201a0106001b10c00afe19c997cd1e3e9419a0c4e4b0d063666c696e74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe23b0b19256bcbcea9207b545f5ea9d5 PEAP: Processing from tunneled session code 0x2409b8 11 EAP-Message = 0x010600201a0106001b10c00afe19c997cd1e3e9419a0c4e4b0d063666c696e74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe23b0b19256bcbcea9207b545f5ea9d5 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 Sending Access-Challenge of id 61 to 192.168.1.5:1812 EAP-Message = 0x0106007019001703010020fcfbdc3fba5ff90f7c5455517c55cb80a3da52bc2fe951f4c8dddc8e53b1e8791703010040114797f07dbae6ebaad07c63dc31dbf1b728a3c092a608b8af3dbd11f1d656972bec28a318937b04484dfb281f14fdca277077021752eccc15263316b9049727 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1a6fe2c851b402b24ecc9efc6bcb7237 Finished request 4 Going to the next request --- Walking the entire request list --- Waking up in 3 seconds... rad_recv: Access-Request packet from host 192.168.1.5:1812, id=62, length=286 User-Name = "cflint" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 NAS-Port = 0 NAS-Identifier = "USR5450\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" Calling-Station-Id = "00-c0-49-f7-02-3c" EAP-Message = 0x02060090190017030100206c80de56e047dcd9eafaa796c66fa1baa7d36ea6490568c44b99c468b4beaac71703010060e998586152fc01ae8de96b081025a4ff6bbe46228df8fd4a21f48c03813e7c54443ff621d6afa11cf0ee1be71e8643a32f6ed57aca88ccab686c0daa89d68d6e66396c4f4a476b6026152b5bc130d9d05a92542cba0e66d4c2c30cf044d15969 State = 0x1a6fe2c851b402b24ecc9efc6bcb7237 NAS-IP-Address = 192.168.1.5 Message-Authenticator = 0xaa5ae05f38fb19879fb50502a65290fe Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_eap: EAP packet type response id 6 length 144 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall[authorize]: module "files" returns notfound for request 5 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x020600411a0206003c310de01d53845567bac20c277e1b257d8e000000000000000050a22efddbf2fe69d4d6e4a3fcf8805e2827a2462040514a0063666c696e74 PEAP: Setting User-Name to cflint PEAP: Adding old state with e2 3b PEAP: Sending tunneled request EAP-Message = 0x020600411a0206003c310de01d53845567bac20c277e1b257d8e000000000000000050a22efddbf2fe69d4d6e4a3fcf8805e2827a2462040514a0063666c696e74 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "cflint" State = 0xe23b0b19256bcbcea9207b545f5ea9d5 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_eap: EAP packet type response id 6 length 65 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall[authorize]: module "files" returns notfound for request 5 rlm_passwd: Added LM-Password: 'b198a03a07f0b931def500a4b8950c8f' to config_items rlm_passwd: Added NT-Password: '0e8d48ab4e70b0b4caaaa2849f246a66' to config_items rlm_passwd: Added SMB-Account-CTRL-TEXT: '[UX ]' to config_items rlm_passwd: Adding "Auth-Type = MS-CHAP" modcall[authorize]: module "etc_smbpasswd" returns ok for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 5 rlm_mschap: Found LM-Password rlm_mschap: Found NT-Password rlm_mschap: Told to do MS-CHAPv2 for cflint with NT-Password rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 5 modcall: group Auth-Type returns ok for request 5 MSCHAP Success modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 PEAP: Got tunneled reply RADIUS code 11 MS-CHAP2-Success = 0x06533d37383435303331413043423441374233363134463746384331324144343345413539384446463937 EAP-Message = 0x010700331a0306002e533d37383435303331413043423441374233363134463746384331324144343345413539384446463937 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc65b1c62e2b3689e0c66d2825525152d PEAP: Processing from tunneled session code 0x22fdb8 11 MS-CHAP2-Success = 0x06533d37383435303331413043423441374233363134463746384331324144343345413539384446463937 EAP-Message = 0x010700331a0306002e533d37383435303331413043423441374233363134463746384331324144343345413539384446463937 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc65b1c62e2b3689e0c66d2825525152d PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 Sending Access-Challenge of id 62 to 192.168.1.5:1812 EAP-Message = 0x0107008019001703010020782bb30b8a1d70f8b5c46de2c32acf83b280698015fce8b0865700abd7e7ad881703010050cd028e9b45102d06397cf8fb977fbd8d6219957d8b41b6f5114dace16269cf44062e25d7c046b590830f52c570f63be92297edb90426498cc04b63977ca30e891a275b5b382d2dfbdfdf5b0e139adf80 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xeac4ac107195a6a23c0ddb221764fb12 Finished request 5 Going to the next request --- Walking the entire request list --- Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 57 with timestamp 434ff02c Cleaning up request 1 ID 58 with timestamp 434ff02c Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 59 with timestamp 434ff02d Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 60 with timestamp 434ff02e Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 4 ID 61 with timestamp 434ff02f Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 5 ID 62 with timestamp 434ff030 Nothing to do. Sleeping until we see a request.