dear All, i need freeradius to assign IP address from several IP pools (rlm_ippool). Before i have tryed this on Linux (suse 10). that worked fine I have taken the same configuaration to the solaris 10 - thing does not work. In debug info comes: --- Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 0 rlm_ippool: Could not find Pool-Name attribute. modcall[post-auth]: module "p2_2" returns noop for request 0 rlm_ippool: Could not find Pool-Name attribute. modcall[post-auth]: module "p2_3" returns noop for request 0 rlm_ippool: Could not find Pool-Name attribute. modcall[post-auth]: module "p2_4" returns noop for request 0 rlm_ippool: Could not find Pool-Name attribute. modcall[post-auth]: module "p2_5" returns noop for request 0 rlm_ippool: Could not find Pool-Name attribute. modcall[post-auth]: module "p2_6" returns noop for request 0 modcall: group post-auth returns noop for request 0 --- As result Access-Accept is sent without IP address. i have tryed that on solaris with freeradius 1.1.0 in 64-bit and with 1.0.5 with 32-bit (similar i have used on suse) here is part of my users config file: user4 Auth-Type := Local, User-Password == "user4" Cisco-Avpair = "gprs:charging-profile-index=6", Cisco-Avpair += "csg:billing_plan=", Fall-Through = yes DEFAULT Client-IP-Address == "10.200.12.31", NAS-Identifier == "GGSN02_s4", Pool-Name := "p2_2" Service-Type = Login, Framed-Protocol = PPP DEFAULT Client-IP-Address == "10.200.12.32", NAS-Identifier == "GGSN03_s4", Pool-Name := "p2_3" Service-Type = Login, Framed-Protocol = PPP ... Can you please tell me where in sources it takes place assignment of the PW_POOL_NAME attribute to the request->config_items. What could be here the problem ? appriciate you help in this matter German Gumenyuk --------------------------------- Bring words and photos together (easily) with PhotoMail - it's free and works with Yahoo! Mail.