hi, all Can I know how to configure the CISCO VSA in freeradius ? what is digest ? I am getting following log .. when I try to login any user rad_recv: Access-Request packet from host 203.88.128.14:1812, id=190, length=483 User-Name = "8888" NAS-IP-Address = 203.88.128.14 NAS-Port-Type = Async Service-Type = Login-User Cisco-AVPair = "xpgk-request-type=user" Cisco-AVPair = "xpgk-source-addr=203.88.135.195:5060" Cisco-AVPair = "xpgk-sip-auth1=8888:203.88.128.14" Cisco-AVPair = "xpgk-sip-auth2=REGISTER:sip:8888@203.88.128.14" Cisco-AVPair = "xpgk-sip-auth3=203d5700deb91f1080000007e92ec1ac@SIP-PROXY" Cisco-AVPair = "xpgk-sip-auth4=cb88de13aec1e59c5236ce008042a186" Digest-Response = "cb88de13aec1e59c5236ce008042a186" Digest-Attributes = 0x010f3230332e38382e3132382e3134 Digest-Attributes = 0x022c3230336435373030646562393166313038303030303030376539326563316163405349502d50524f5859 Digest-Attributes = 0x030a5245474953544552 Digest-Attributes = 0x04187369703a38383838403230332e38382e3132382e3134 Digest-Attributes = 0x06054d4435 Digest-Attributes = 0x0a0638383838 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 68 modcall[authorize]: module "preprocess" returns ok for request 68 modcall[authorize]: module "chap" returns noop for request 68 modcall[authorize]: module "mschap" returns noop for request 68 rlm_digest: Converting Digest-Attributes to something sane... Digest-Realm = "203.88.128.14" Digest-Nonce = "203d5700deb91f1080000007e92ec1ac@SIP-PROXY" Digest-Method = "REGISTER" Digest-URI = "sip:8888@203.88.128.14" Digest-Algorithm = "MD5" Digest-User-Name = "8888" rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 68 rlm_realm: No '@' in User-Name = "8888", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 68 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 68 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 68 modcall: group authorize returns ok for request 68 rad_check_password: Found Auth-Type DIGEST auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 68 rlm_digest: Configuration item "User-Password" is required for authentication. modcall[authenticate]: module "digest" returns invalid for request 68 modcall: group authenticate returns invalid for request 68 auth: Failed to validate the user. Delaying request 68 for 1 seconds Finished request 68 Going to the next request --------------------------------- Click here to donate to the Hurricane Katrina relief effort.