Eap-Tls Problem

21 Aug 2006

      Hello I'm a new user, and i'm trying to set an Eap-Tls authentication 
using freeradius 1.1.2.
My system is debian stable.

I installed freeradius 1.1.2 (./confidure, make ,make install) and 
libssl-dev (apt-get install libssl-dev) like here:
http://web.archive.org/web/20031206113912/http://www.impossiblereflex.com/80...
http://www.alphacore.net/spip/article.php3?id_article=33

When I turn on freeradius I can see this:

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /etc/raddb/clients.conf
Config:   including file: /etc/raddb/eap.conf
Config:   including file: /etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/usr/local/var"
 main: logdir = "/usr/local/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/usr/local/var/log/radius/radacct"
 main: hostname_lookups = yes
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = yes
 main: log_file = "/usr/local/var/log/radius/radius.log"
 main: log_auth = yes
 main: log_auth_badpass = yes
 main: log_auth_goodpass = yes
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "tls"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
 tls: rsa_key_exchange = no
 tls: dh_key_exchange = yes
 tls: rsa_key_length = 512
 tls: dh_key_length = 512
 tls: verify_depth = 0
 tls: CA_path = "(null)"
 tls: pem_file_type = yes
 tls: private_key_file = "/etc/1x/jagger.pem"
 tls: certificate_file = "/etc/1x/jagger.pem"
 tls: CA_file = "/etc/1x/root.pem"
 tls: private_key_password = "whatever"
 tls: dh_file = "/etc/1x/dh"
 tls: random_file = "/etc/1x/random"
 tls: fragment_size = 1024
 tls: include_length = yes
 tls: check_crl = no
 tls: check_cert_cn = "(null)"
 tls: cipher_list = "(null)"
 tls: check_cert_issuer = "(null)"
rlm_eap_tls: Loading the certificate file as a chain
rlm_eap: Loaded and initialized type tls
 peap: default_eap_type = "mschapv2"
 peap: copy_request_to_tunnel = no
 peap: use_tunneled_reply = no
 peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/etc/raddb/huntgroups"
 preprocess: hints = "/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded detail
 detail: detailfile = 
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (auth_log)
Module: Loaded files
 files: usersfile = "/etc/raddb/users"
 files: acctusersfile = "/etc/raddb/acct_users"
 files: preproxy_usersfile = "/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
 detail: detailfile = 
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/usr/local/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.

After I made the certificate and installed in the client I tried to 
request an authentication but the output show me an error:

rad_recv: Access-Request packet from host 192.168.1.5:1217, id=17, 
length=139
        User-Name = "marcello"
        NAS-IP-Address = 0.0.0.0
        NAS-Port = 0
        Called-Station-Id = "00-40-05-30-C5-86"
        Calling-Station-Id = "00-0C-F1-15-17-59"
        NAS-Identifier = "DLink-900AP+"
        Framed-MTU = 1380
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 0x020d000d016d617263656c6c6f
        Message-Authenticator = 0x5cf6d0c113ea537193f632be5324ddac
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
  modcall[authorize]: module "preprocess" returns ok for request 8
radius_xlat:  
'/usr/local/var/log/radius/radacct/192.168.1.5/auth-detail-20060821'
rlm_detail: 
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d 
expands to 
/usr/local/var/log/radius/radacct/192.168.1.5/auth-detail-20060821
  modcall[authorize]: module "auth_log" returns ok for request 8
  rlm_eap: EAP packet type response id 13 length 13
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 8
    users: Matched entry DEFAULT at line 152
    users: Matched entry marcello at line 219
  modcall[authorize]: module "files" returns ok for request 8
modcall: leaving group authorize (returns updated) for request 8
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
 rlm_eap_tls: Requiring client certificate
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 8
modcall: leaving group authenticate (returns handled) for request 8
Sending Access-Challenge of id 17 to 192.168.1.5 port 1217
        EAP-Message = 0x010e00060d20
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xf07c05d2e094204483f4809fce1d0c28
Finished request 8
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.1.5:1217, id=18, 
length=224
        User-Name = "marcello"
        NAS-IP-Address = 0.0.0.0
        NAS-Port = 0
        Called-Station-Id = "00-40-05-30-C5-86"
        Calling-Station-Id = "00-0C-F1-15-17-59"
        NAS-Identifier = "DLink-900AP+"
        Framed-MTU = 1380
        NAS-Port-Type = Wireless-802.11
        EAP-Message = 
0x020e00500d800000004616030100410100003d030144e9b43485e72b29db6f1029820e8626f3358dc31aacc52a129ce61689ebe58f00001600040005000a000900640062000300060013001200630100
        State = 0xf07c05d2e094204483f4809fce1d0c28
        Message-Authenticator = 0x975a5fb5db9745857a408bd7f840d26b
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 9
  modcall[authorize]: module "preprocess" returns ok for request 9
radius_xlat:  
'/usr/local/var/log/radius/radacct/192.168.1.5/auth-detail-20060821'
rlm_detail: 
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d 
expands to 
/usr/local/var/log/radius/radacct/192.168.1.5/auth-detail-20060821
  modcall[authorize]: module "auth_log" returns ok for request 9
  rlm_eap: EAP packet type response id 14 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 9
    users: Matched entry DEFAULT at line 152
    users: Matched entry marcello at line 219
  modcall[authorize]: module "files" returns ok for request 9
modcall: leaving group authorize (returns updated) for request 9
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 9
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/tls
  rlm_eap: processing type tls
  rlm_eap_tls: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11
    (other): before/accept initialization
    TLS_accept: before/accept initialization
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
    TLS_accept: SSLv3 read client hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
    TLS_accept: SSLv3 write server hello A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 063f], Certificate
    TLS_accept: SSLv3 write certificate A
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 009a], CertificateRequest
    TLS_accept: SSLv3 write certificate request A
    TLS_accept: SSLv3 flush data
    TLS_accept:error in SSLv3 read client certificate A
rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0)
In SSL Handshake Phase
In SSL Accept mode
  eaptls_process returned 13
  modcall[authenticate]: module "eap" returns handled for request 9
modcall: leaving group authenticate (returns handled) for request 9
Sending Access-Challenge of id 18 to 192.168.1.5 port 1217
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 
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
        EAP-Message = 0x040613024954310e300c060355040813054954414c59
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x8bfc44c788f3b51de96ef0e08569c6e5
Finished request 9
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 8 ID 17 with timestamp 44e9b492
Cleaning up request 9 ID 18 with timestamp 44e9b492
Nothing to do.  Sleeping until we see a request.

Can Somebody help me? Thanks

Matteo

Matteo Lazzarini

tags

participants (1)