Hi, Running Cisco AP and FreeRadius, I get PEAP failures. TTLS works. I do not see a ACCESS REJECT with PEAP. However, there is no ACCESS_ACCEPT either. It seems to me from the debug that RADIUS expects a packet from AP but not getting it. Any ideas ? Thanks in advance. After a few minutes, client disconnects and retries to connect, starting this cycle again. ---------------LOG follows--------- rlm_mschap: adding MS-CHAPv2 MPPE keys modsingle[authenticate]: returned from mschap (rlm_mschap) for request 5 modcall[authenticate]: module "mschap" returns ok for request 5 modcall: group Auth-Type returns ok for request 5 MSCHAP Success modsingle[authenticate]: returned from eap (rlm_eap) for request 5 modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 PEAP: Got tunneled reply RADIUS code 11 MS-CHAP2-Success = 0x05533d3943384231454435313545413639303638414632393044363831303634394244 4544303831443935 EAP-Message = 0x010600331a0305002e533d394338423145443531354541363930363841463239304436 38313036343942444544303831443935 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2541b8665c3f07dd9c5e6e02d700e023 PEAP: Processing from tunneled session code 0x244888 11 MS-CHAP2-Success = 0x05533d3943384231454435313545413639303638414632393044363831303634394244 4544303831443935 EAP-Message = 0x010600331a0305002e533d394338423145443531354541363930363841463239304436 38313036343942444544303831443935 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2541b8665c3f07dd9c5e6e02d700e023 PEAP: Got tunneled Access-Challenge modsingle[authenticate]: returned from eap (rlm_eap) for request 5 modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 Sending Access-Challenge of id 115 to 192.168.1.7:1150 EAP-Message = 0x010600801900170301002069b032ec228c41b896215232e86bf4044b6a18adf88f059c 9baf727da5382b1a17030100508b63b8f690789ba6240940129df44921e374f12727725d 1105c9ee8da81ac26f19a16d55612a129c2fbab15882c75042e73ce9101e3a91d1ec31a3 b6b235297a75a99549c8d91ad24b3ded409488aa51 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x2d5808a73134c88586fac62658ba132d Finished request 5 Going to the next request This e-mail may contain confidential or privileged information. If you think you have received this e-mail in error, please advise the sender by reply e-mail and then delete this e-mail immediately. Thank you. U. S. Robotics