Hi All

I have one Cisco 10000 NAS inmy network and this is the authenticate request :

Packet-Type = Access-Request
    Cisco-AVPair = "client-mac-address=f43e.6166.dba0"
    Framed-Protocol = PPP
    User-Name = "7727221873"
    NAS-Port-Type = Ethernet
    NAS-Port = 71468299
    NAS-Port-Id = "0/0/0/0"
    Cisco-AVPair = "circuit-id-tag=Kangan-1 atm 7/42:218:0.35"
    Service-Type = Framed-User
    NAS-IP-Address = 10.150.21.218
    Acct-Session-Id = "0442850B"
    Calling-Station-Id = "f4:3e:61:66:db:a0"
    Called-Station-Id = ""
    SQL-User-Name = "7727221873"

i have tow Cisco-AVPair attribute in request and i need to process one of them that being started by 'circuit-id-tag=' so i use this :

    if (Cisco-AVpair =~ /^circuit-id-tag=(.*)$/) {

                            update request {
                                    Connect-Info := "%{1}"
                            }
     }

but it is not working !

in similar case that i use   regular expression for updating request it work well for example :

             if (Cisco-AVpair =~ /^client-mac-address=([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
                    if (!Calling-Station-Id) {
                            update request {
                                    Calling-Station-Id := "%{1}:%{2}:%{3}:%{4}:%{5}:%{6}"
                                    Called-Station-Id := "%{NAS-Identifier}"
                            }

                    }
             }

in last i think in this case because of multiply Cisco-AVPair attribute in request regular expression should be different but i can not find any source that can enplane this problem .

Best regards.