ubuntu@ip-10-10-1-238:~$ sudo radiusd -X
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/files
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = no
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client station-1 {
 	ipaddr = 223.171.35.38
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client sunho-notebook {
 	ipaddr = 211.171.128.253
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "tls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  instantiate {
  }
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	verify_depth = 0
   	ca_path = "/etc/freeradius/3.0/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/freeradius/3.0/certs/server.key"
   	certificate_file = "/etc/freeradius/3.0/certs/server.crt"
   	ca_file = "/etc/freeradius/3.0/certs/ca.pem"
   	private_key_password = <<< secret >>>
   	dh_file = "/etc/freeradius/3.0/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	ecdh_curve = "prime256v1"
   	tls_max_version = ""
   	tls_min_version = "1.0"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Ready to process requests
(0) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 145
(0)   User-Name = "user@example.org"
(0)   NAS-IP-Address = 192.168.0.10
(0)   Called-Station-Id = "704f573b432b"
(0)   Calling-Station-Id = "701ce7ea7851"
(0)   NAS-Identifier = "704f573b432b"
(0)   NAS-Port = 67
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   EAP-Message = 0x020000150175736572406578616d706c652e6f7267
(0)   Message-Authenticator = 0xcdb4f7026bd1f0686e99ccc8c023bb36
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(0) suffix: No such realm "example.org"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 21
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: Initiating new EAP-TLS session
(0) eap_tls: Setting verify mode to require certificate from client
(0) eap_tls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 1 length 6
(0) eap: EAP session adding &reply:State = 0x8e60f0b08e61fd23
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(0)   EAP-Message = 0x010100060d20
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x8e60f0b08e61fd23980d5523ba0ace4e
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 0 with timestamp +11
(1) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 308
(1)   User-Name = "user@example.org"
(1)   NAS-IP-Address = 192.168.0.10
(1)   Called-Station-Id = "704f573b432b"
(1)   Calling-Station-Id = "701ce7ea7851"
(1)   NAS-Identifier = "704f573b432b"
(1)   NAS-Port = 67
(1)   Framed-MTU = 1400
(1)   State = 0x8e60f0b08e61fd23980d5523ba0ace4e
(1)   NAS-Port-Type = Wireless-802.11
(1)   EAP-Message = 0x020100a60d800000009c16030300970100009303035c358ef299bd6591b0bb1eae008d15acd5745afb6a164e484469c0a82843704500002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d
(1)   Message-Authenticator = 0xf8a2d3ced74c07c7eee475585c40301e
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(1) suffix: No such realm "example.org"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 166
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x8e60f0b08e61fd23
(1) eap: Finished EAP session with state 0x8e60f0b08e61fd23
(1) eap: Previous EAP request found for state 0x8e60f0b08e61fd23, released from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Peer indicated complete TLS record size will be 156 bytes
(1) eap_tls: Got complete TLS record (156 bytes)
(1) eap_tls: [eaptls verify] = length included
(1) eap_tls: (other): before SSL initialization
(1) eap_tls: TLS_accept: before SSL initialization
(1) eap_tls: TLS_accept: before SSL initialization
(1) eap_tls: <<< recv TLS 1.2  [length 0097] 
(1) eap_tls: TLS_accept: SSLv3/TLS read client hello
(1) eap_tls: >>> send TLS 1.2  [length 003d] 
(1) eap_tls: TLS_accept: SSLv3/TLS write server hello
(1) eap_tls: >>> send TLS 1.2  [length 0bd3] 
(1) eap_tls: TLS_accept: SSLv3/TLS write certificate
(1) eap_tls: >>> send TLS 1.2  [length 014d] 
(1) eap_tls: TLS_accept: SSLv3/TLS write key exchange
(1) eap_tls: >>> send TLS 1.2  [length 00c2] 
(1) eap_tls: TLS_accept: SSLv3/TLS write certificate request
(1) eap_tls: >>> send TLS 1.2  [length 0004] 
(1) eap_tls: TLS_accept: SSLv3/TLS write server done
(1) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_tls: In SSL Handshake Phase
(1) eap_tls: In SSL Accept mode
(1) eap_tls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 2 length 1014
(1) eap: EAP session adding &reply:State = 0x8e60f0b08f62fd23
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(1)   EAP-Message = 0x010203f60dc000000e3c160303003d020000390303c24f43f56b7090151d03d91e72db6951e3c3986ac6250ca1e34491a96aaf089e00c030000011ff01000100000b000403000102001700001603030bd30b000bcf000bcc0004de308204da308202c2a003020102020101300d06092a864886f70d0101
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x8e60f0b08f62fd23980d5523ba0ace4e
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 0 with timestamp +11
(2) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148
(2)   User-Name = "user@example.org"
(2)   NAS-IP-Address = 192.168.0.10
(2)   Called-Station-Id = "704f573b432b"
(2)   Calling-Station-Id = "701ce7ea7851"
(2)   NAS-Identifier = "704f573b432b"
(2)   NAS-Port = 67
(2)   Framed-MTU = 1400
(2)   State = 0x8e60f0b08f62fd23980d5523ba0ace4e
(2)   NAS-Port-Type = Wireless-802.11
(2)   EAP-Message = 0x020200060d00
(2)   Message-Authenticator = 0xe6393348065af33c6ad6108dec22511c
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(2) suffix: No such realm "example.org"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x8e60f0b08f62fd23
(2) eap: Finished EAP session with state 0x8e60f0b08f62fd23
(2) eap: Previous EAP request found for state 0x8e60f0b08f62fd23, released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: Continuing EAP-TLS
(2) eap_tls: Peer ACKed our handshake fragment
(2) eap_tls: [eaptls verify] = request
(2) eap_tls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1014
(2) eap: EAP session adding &reply:State = 0x8e60f0b08c63fd23
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(2)   EAP-Message = 0x010303f60dc000000e3c62da6c24d6b4cc2a815534cf52a3dc6119f546592d7f997683bdabd3869852f7c8d154a2e8211246c7d623fee8238c239d558ccea05e2339bd46ddb83336a8a5ee846e1bfaa61a03f0f140656fbcbfd9762b345e9c9b67d9c79002c95a6b963fbf22aedf8634d74a2b03a6f9b4
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x8e60f0b08c63fd23980d5523ba0ace4e
(2) Finished request
Waking up in 4.9 seconds.
(2) Cleaning up request packet ID 0 with timestamp +11
(3) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148
(3)   User-Name = "user@example.org"
(3)   NAS-IP-Address = 192.168.0.10
(3)   Called-Station-Id = "704f573b432b"
(3)   Calling-Station-Id = "701ce7ea7851"
(3)   NAS-Identifier = "704f573b432b"
(3)   NAS-Port = 67
(3)   Framed-MTU = 1400
(3)   State = 0x8e60f0b08c63fd23980d5523ba0ace4e
(3)   NAS-Port-Type = Wireless-802.11
(3)   EAP-Message = 0x020300060d00
(3)   Message-Authenticator = 0xafc8215c35598105746e78d6575490a5
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(3) suffix: No such realm "example.org"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x8e60f0b08c63fd23
(3) eap: Finished EAP session with state 0x8e60f0b08c63fd23
(3) eap: Previous EAP request found for state 0x8e60f0b08c63fd23, released from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: Continuing EAP-TLS
(3) eap_tls: Peer ACKed our handshake fragment
(3) eap_tls: [eaptls verify] = request
(3) eap_tls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 1014
(3) eap: EAP session adding &reply:State = 0x8e60f0b08d64fd23
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(3)   EAP-Message = 0x010403f60dc000000e3c786fed10a59ec759d78d22d762157a691ce1b46949b6b286ce1a2f630f6a52538243a46529a82525bb5e435a7c25c4f9bd57274db9bfdefb2394bdf9a3a1c0b5bc8efd93093507d3a6230110b342e84713cbd42bed4772bc370ebfb4754993a8bb04356bdddae41190f69eda35
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x8e60f0b08d64fd23980d5523ba0ace4e
(3) Finished request
Waking up in 4.9 seconds.
(3) Cleaning up request packet ID 0 with timestamp +11
(4) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148
(4)   User-Name = "user@example.org"
(4)   NAS-IP-Address = 192.168.0.10
(4)   Called-Station-Id = "704f573b432b"
(4)   Calling-Station-Id = "701ce7ea7851"
(4)   NAS-Identifier = "704f573b432b"
(4)   NAS-Port = 67
(4)   Framed-MTU = 1400
(4)   State = 0x8e60f0b08d64fd23980d5523ba0ace4e
(4)   NAS-Port-Type = Wireless-802.11
(4)   EAP-Message = 0x020400060d00
(4)   Message-Authenticator = 0x0487735420bacdf894184e2a241398fb
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(4) suffix: No such realm "example.org"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 6
(4) eap: No EAP Start, assuming it's an on-going EAP conversation
(4)     [eap] = updated
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     [pap] = noop
(4)   } # authorize = updated
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x8e60f0b08d64fd23
(4) eap: Finished EAP session with state 0x8e60f0b08d64fd23
(4) eap: Previous EAP request found for state 0x8e60f0b08d64fd23, released from the list
(4) eap: Peer sent packet with method EAP TLS (13)
(4) eap: Calling submodule eap_tls to process data
(4) eap_tls: Continuing EAP-TLS
(4) eap_tls: Peer ACKed our handshake fragment
(4) eap_tls: [eaptls verify] = request
(4) eap_tls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 642
(4) eap: EAP session adding &reply:State = 0x8e60f0b08a65fd23
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(4)   EAP-Message = 0x010502820d8000000e3c71c6b50111980c295cf90e036e227db46ae622d3711ce48fc32e0a676f4ff6926904675fbdd650c39cafcc659b4a46fdf8dff8db5f24fce0c3247e045c15485106eb29012d1cb774b362063becd08942125c5b13edde160303014d0c0001490300174104af852ddf13e2f0ed6b
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x8e60f0b08a65fd23980d5523ba0ace4e
(4) Finished request
Waking up in 4.9 seconds.
(4) Cleaning up request packet ID 0 with timestamp +11
(5) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 1644
(5)   User-Name = "user@example.org"
(5)   NAS-IP-Address = 192.168.0.10
(5)   Called-Station-Id = "704f573b432b"
(5)   Calling-Station-Id = "701ce7ea7851"
(5)   NAS-Identifier = "704f573b432b"
(5)   NAS-Port = 67
(5)   Framed-MTU = 1400
(5)   State = 0x8e60f0b08a65fd23980d5523ba0ace4e
(5)   NAS-Port-Type = Wireless-802.11
(5)   EAP-Message = 0x020505d40dc000000863160303082b0b0005d90005d60005d3308205cf308203b7a003020102020102300d06092a864886f70d01010b0500308193310b3009060355040613024652310f300d06035504080c065261646975733112301006035504070c09536f6d65776865726531153013060355040a0c
(5)   Message-Authenticator = 0xdc7992ea8fa49c9e68d4a1c633b8e72a
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(5) suffix: No such realm "example.org"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 1492
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x8e60f0b08a65fd23
(5) eap: Finished EAP session with state 0x8e60f0b08a65fd23
(5) eap: Previous EAP request found for state 0x8e60f0b08a65fd23, released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: Continuing EAP-TLS
(5) eap_tls: Peer indicated complete TLS record size will be 2147 bytes
(5) eap_tls: Expecting 2 TLS record fragments
(5) eap_tls: Got first TLS record fragment (1482 bytes).  Peer indicated more fragments to follow
(5) eap_tls: [eaptls verify] = first fragment
(5) eap_tls: ACKing Peer's TLS record fragment
(5) eap_tls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 6 length 6
(5) eap: EAP session adding &reply:State = 0x8e60f0b08b66fd23
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(5)   EAP-Message = 0x010600060d00
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x8e60f0b08b66fd23980d5523ba0ace4e
(5) Finished request
Waking up in 4.9 seconds.
(5) Cleaning up request packet ID 0 with timestamp +12
(6) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 817
(6)   User-Name = "user@example.org"
(6)   NAS-IP-Address = 192.168.0.10
(6)   Called-Station-Id = "704f573b432b"
(6)   Calling-Station-Id = "701ce7ea7851"
(6)   NAS-Identifier = "704f573b432b"
(6)   NAS-Port = 67
(6)   Framed-MTU = 1400
(6)   State = 0x8e60f0b08b66fd23980d5523ba0ace4e
(6)   NAS-Port-Type = Wireless-802.11
(6)   EAP-Message = 0x0206029f0d00a06ba6d17bb2b23af5592f7869f3944354812009850aa10a1000004241040621ae2eeb0e919d182c58c1a0b6418597140a8126dfb072d53a71a3aedc4f5bb694102ce204a9feabf416d66b3d1774c9b0008f8e29b7e3604c92229068d59d0f00020404010200986749316e430239a36533
(6)   Message-Authenticator = 0x26d43af12e94d7f008ff4f11f2778327
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(6) suffix: No such realm "example.org"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 671
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)     [eap] = updated
(6)     [files] = noop
(6)     [expiration] = noop
(6)     [logintime] = noop
(6)     [pap] = noop
(6)   } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x8e60f0b08b66fd23
(6) eap: Finished EAP session with state 0x8e60f0b08b66fd23
(6) eap: Previous EAP request found for state 0x8e60f0b08b66fd23, released from the list
(6) eap: Peer sent packet with method EAP TLS (13)
(6) eap: Calling submodule eap_tls to process data
(6) eap_tls: Continuing EAP-TLS
(6) eap_tls: Got final TLS record fragment (665 bytes)
(6) eap_tls: [eaptls verify] = ok
(6) eap_tls: Done initial handshake
(6) eap_tls: TLS_accept: SSLv3/TLS write server done
(6) eap_tls: <<< recv TLS 1.2  [length 05dd] 
(6) eap_tls: Creating attributes from certificate OIDs
(6) eap_tls:   TLS-Cert-Serial := "9b8908b10ad4e429"
(6) eap_tls:   TLS-Cert-Expiration := "240107092124Z"
(6) eap_tls:   TLS-Cert-Subject := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin@example.org/CN=Example Certificate Authority"
(6) eap_tls:   TLS-Cert-Issuer := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin@example.org/CN=Example Certificate Authority"
(6) eap_tls:   TLS-Cert-Common-Name := "Example Certificate Authority"
(6) eap_tls: Creating attributes from certificate OIDs
(6) eap_tls:   TLS-Client-Cert-Serial := "02"
(6) eap_tls:   TLS-Client-Cert-Expiration := "200108092126Z"
(6) eap_tls:   TLS-Client-Cert-Subject := "/C=FR/ST=Radius/O=Example Inc./CN=user@example.org/emailAddress=user@example.org"
(6) eap_tls:   TLS-Client-Cert-Issuer := "/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin@example.org/CN=Example Certificate Authority"
(6) eap_tls:   TLS-Client-Cert-Common-Name := "user@example.org"
(6) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication"
(6) eap_tls: TLS_accept: SSLv3/TLS read client certificate
(6) eap_tls: <<< recv TLS 1.2  [length 0046] 
(6) eap_tls: TLS_accept: SSLv3/TLS read client key exchange
(6) eap_tls: <<< recv TLS 1.2  [length 0208] 
(6) eap_tls: TLS_accept: SSLv3/TLS read certificate verify
(6) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec
(6) eap_tls: <<< recv TLS 1.2  [length 0010] 
(6) eap_tls: TLS_accept: SSLv3/TLS read finished
(6) eap_tls: >>> send TLS 1.2  [length 0001] 
(6) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec
(6) eap_tls: >>> send TLS 1.2  [length 0010] 
(6) eap_tls: TLS_accept: SSLv3/TLS write finished
(6) eap_tls: (other): SSL negotiation finished successfully
(6) eap_tls: SSL Connection Established
(6) eap_tls: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 7 length 61
(6) eap: EAP session adding &reply:State = 0x8e60f0b08867fd23
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(6)   EAP-Message = 0x0107003d0d800000003314030300010116030300281e6973755166a35a1fdc4433b72897e6f4492a9e36844c22d602e69b19ce4d21245dd0780f1ddd8e
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x8e60f0b08867fd23980d5523ba0ace4e
(6) Finished request
Waking up in 4.9 seconds.
(6) Cleaning up request packet ID 0 with timestamp +12
(7) Received Access-Request Id 0 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148
(7)   User-Name = "user@example.org"
(7)   NAS-IP-Address = 192.168.0.10
(7)   Called-Station-Id = "704f573b432b"
(7)   Calling-Station-Id = "701ce7ea7851"
(7)   NAS-Identifier = "704f573b432b"
(7)   NAS-Port = 67
(7)   Framed-MTU = 1400
(7)   State = 0x8e60f0b08867fd23980d5523ba0ace4e
(7)   NAS-Port-Type = Wireless-802.11
(7)   EAP-Message = 0x020700060d00
(7)   Message-Authenticator = 0x35a41bd0f2f81394fee838c720f96214
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(7) suffix: No such realm "example.org"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)     [eap] = updated
(7)     [files] = noop
(7)     [expiration] = noop
(7)     [logintime] = noop
(7)     [pap] = noop
(7)   } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x8e60f0b08867fd23
(7) eap: Finished EAP session with state 0x8e60f0b08867fd23
(7) eap: Previous EAP request found for state 0x8e60f0b08867fd23, released from the list
(7) eap: Peer sent packet with method EAP TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: Continuing EAP-TLS
(7) eap_tls: Peer ACKed our handshake fragment.  handshake is finished
(7) eap_tls: [eaptls verify] = success
(7) eap_tls: [eaptls process] = success
(7) eap: Sending EAP Success (code 3) ID 7 length 4
(7) eap: Freeing handler
(7)     [eap] = ok
(7)   } # authenticate = ok
(7) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(7)   post-auth {
(7)     update {
(7)       No attributes updated
(7)     } # update = noop
(7)     [exec] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)   } # post-auth = noop
(7) Sent Access-Accept Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(7)   MS-MPPE-Recv-Key = 0x6851bd68488149beb6175757297429d2c5fbf2ba7fb9745df4f2803ddc2b8b6f
(7)   MS-MPPE-Send-Key = 0x115def9e214dd9a1c76bd12f4f31bfafc118723403846d253703224b9b334733
(7)   EAP-Message = 0x03070004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   User-Name = "user@example.org"
(7) Finished request
Waking up in 4.9 seconds.
(7) Cleaning up request packet ID 0 with timestamp +12
Ready to process requests