Sure – but that ain’t
working.. at least not on my switches and don’t ask me why... I usually
have 2-3 computers on one port ( but computers have the same VLANID in RADIUS
), so might that be the problem?
Regards,
Edvin Seferovic
From:
freeradius-users-bounces@lists.freeradius.org
[mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of Jeff Reilly
Sent: Sonntag, 13. November 2005
21:58
To:
Subject: RE: assigning a vlan-id
after successful authentication
First, this information is well documented both by ProCurve
and in RFC3580.
That said the AV pairs you're looking for are as follows:
Tunnel-Medium-Type = 802
Tunnel-Private-Group-ID = 123 (the VLAN)
Tunnel-Type = VLAN
Jeff
-------- Original Message --------
Subject: assigning a vlan-id after successful authentication
From: Sven Juergensen <sjuergensen@tng.de>
Date: Fri, November 11, 2005 8:48 pm
To: freeradius-users@lists.freeradius.org
hello people,
how does the above mentioned work? i am
not quite sure where to start. is it
embedded in the 'Reply-Message' or does
it have to do with the tunnel-types?
i'm trying to supply a vlan-id to an
hp2626 with mac-based authentication.
couldn't find this in the faq or
relevant conf-files either - what am
i missing?
thanks alot in advance,
sven
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html