Hi,

        Thanks for the help. Now radiusd is receiving the packets. But
        it is ignoring the packat saying it is from unknow client.

rad_recv: Access-Request packet from host 2001:888:1941::3 port 30407, id=101, length=88
Ignoring request from unknown client 2001:888:1941::3 port 30407

I have following entry in the clients.conf file

client  2001:888:1941::3 {
        secret  = sharedsecret
        shortname       = mps_daz_1
}

Thanks in advance.

Regards,
Sujata

>-----Original Message-----
>From:
>freeradius-users-bounces+sujata.gaddemane=wipro.com@lists.freer
>adius.org
>[mailto:freeradius-users-bounces+sujata.gaddemane=wipro.com@lis
>ts.freeradius.org] On Behalf Of A.L.M.Buxey@lboro.ac.uk
>Sent: Friday, October 06, 2006 1:34 AM
>To: FreeRadius users mailing list
>Subject: Re: IPV6 support
>
>
>Hi,
>
>>
>> Hi,
>>
>>     I am using FreeRADIUS 2.0.0 ; $Date: 2006/08/15 20:46:48
>>
>>     Will this server work on a host configured with IPV6 address and
>> clients will still be
>>     able to authenticate using this server?
>>
>>     I am currently not able to use this radius server. Using
>tcpdump I
>> could see the radius packets reaching the server,
>>     but the packet is not reaching the radiusd daemon.
>>   
>>     Do I need to do any configuration changes for the same? Should I
>> use some other version?
>
>
>you need to configure your freeradius radiusd.conf to use IPv6.
>
>eg
>
>listen {
>        ipv6addr = ::1   # any.  ::1 == localhost
>        port = 0
>        type = auth
>#       interface = eth0
>}
>
>PLEASE read the example radiusd.conf in raddb for more info -
>for example, one freeradius daemon CANNOT run ipv4 and ipv6 at
>the same time (currently) and ALSO there is a bug.  :: 
>(listen on any address) causes a segmentation fault.  ::1 
>(listen localhost only) works fine - I'm _supposing_ that
>setting the systems IPv6 address as the
>value would work, but I dont have any remote tools to test
>against. its not like IPv6 is going anywhere anyway........  ;-)
>
>you can tell its working (as much as it currently does) by
>looking att he debug logs when you run 'radiusd -X'...you
>should see something like
>
> main: port = 1812
> listen: type = "auth"
> listen: ipv6addr = ::1 IPv6 address [::1]
> listen: port = 0
>
>and see the listening process using 'netstat' tool (for example)
>
>alan
>-
>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
>