i've enable with link coa on site-avalaible to site-enable,when i try to run on debug mode also appear that port 3779 is listen:
Sending Accounting-Response of id 1 to 127.0.0.1 port 3779
Finished request 2.
Cleaning up request 2 ID 1 with timestamp +182
Going to the next request
Waking up in 4.8 seconds.
Cleaning up request 1 ID 6 with timestamp +181
Ready to process requests
But when i try to execute command to disconnect , still not response:
Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779
User-Name = "alice"
Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779
User-Name = "alice"
Sending Disconnect-Request of id 78 to 192.168.2.3 port 3779
User-Name = "alice"
radclient: no response from server for ID 78 socket 3
Actually i execute it inside radius server machie (ip 192.168.2.3)
are there missing configuration ?
On Sun, Mar 10, 2013 at 10:10 PM, Alan DeKok
<aland@deployingradius.com> wrote:
Iftakhul Anwar wrote:
> On site-avalaible/coa i've get this :
You're supposed to READ IT. And ENABLE IT.
You do know how to enable it, right? You know the difference between
raddb/sites-enabled and raddb/sites-available?
And the point of running the server in debugging mode is to READ IT.
If it doesn't say "listening on 3799", then you CAN'T SEND IT PACKETS to
port 3799.
--
M.Iftakhul AnwarMeruvian Integrator
High Performance Computing / Cloud Computing (HPC/CC)
Office Phone : 021-93586577
Mobile Phone : 085215331477